A DSP-Based Remote Control Laboratory

This paper presents a framework for rapid remote experiment implementation in the field of automatic control. The proposed solution is based on in-house developed embedded control hardware and two commercially available software packages. MATLAB/Simulink is used for rapid experiment control algorithm development, while LabVIEW is used for the user front-end and remote control. A combination of presented hardware and software solutions enables the rapid and easy creation of different interactive remote control experiments. Using this solution, a digital-signal-processor-based remote control laboratory for teaching purposes has been realized. This remote laboratory enables the remote users to easily interact with a set of physical control experiments through the Internet. In the friendly user interface, the remote user can change predefined system parameters and observe system response in textual, graphical, or video format. In addition, this remote laboratory includes a booking system, which enables remote users to book experiments in advance.     

A polydispersed particle system representation of the porosity for non-saturated cementitious materials

In this paper, the porosity of cementitious materials is described in terms of pore size distribution by means of a 3-dimensional overlapping sphere system with polydispersivity in size. On the basis of results established by Lu and Torquato [B. Lu, S. Torquato, Nearest-surface distribution functions for polydispersed particle systems, Phys. Rev. A 45(8) (1992) 5530-5544] and Torquato [S. Torquato, Random Heterogeneous Media: Microstructure and Macroscopic Properties. Springer-Verlag: New York, 2001] providing relations for nearest-neighbor distribution functions, the volume fraction of pores having a radius larger than a prescribed value is explicitly expressed. By adopting an appropriate size distribution function for the sphere system, it is shown that the pore size distribution of cementitious materials as detected for instance by mercury intrusion porosimetry (MIP), which generally points out several pore classes, can be well approached. On the basis of this porosity representation, the evaluation of the capillary pressure in function of the saturation degree is provided. The model is then applied to the simulation of the saturation degree versus relative humidity adsorption curves. The impact of the pore size distribution, the temperature and the thickness of the adsorbed water layer on these parameters are assessed and analyzed for three model materials having different pore characteristics.     

Impedance spectroscopy of ultrafine-grain SnO2 ceramics with a variable grain size

The impedance spectra of nanocrystalline SnO₂ ceramics with an average grain size d ranging from 3 to 43 nm were investigated in the frequency range 1–10⁶ Hz at temperatures from 25 to 300°C in a dry oxygen atmosphere. Analysis of the experimental data by the graphoanalytical method made it possible to separate the contributions of grain bulk and grain boundaries to the conductivity. It is shown that the samples investigated can be arbitrarily divided into two groups with respect to the character of their conductivity. For the samples with an average grain size d < 25 nm, the charge transfer processes are almost completely determined by the grain boundaries. In samples with a larger grain size, the contribution of grain bulk to the conductivity is comparable with that of grain boundaries.     

Improvement of the wavelength switching behavior of semiconductor tunable lasers through optical feedback from a periodic reference filter based on a novel prism-based implementation of a Fox-Smith resonator

We show that the wavelength switching behavior of semiconductor tunable lasers can be improved through optical feedback from a stable reference filter. The filter is based on a novel prism-based implementation of a Fox-Smith resonator and has a response consisting of periodically spaced peaks, both in reflection and transmission. The improvement of the wavelength switching behavior stems from the suppression of the thermally induced wavelength drift associated with the switching of the tuning currents.     

Redox Equilibrium of Iron in Silicate Glasses

The effect of some additives on the equilibrium of valence forms of iron is investigated. It is demonstrated that tin and carbon more significantly than fluorine reduce iron. The redox potential of the glass matrix affects the equilibrium between difference valence forms of iron much less than additives correcting spectral characteristics of glass.     

Performance of a combined eco-system of ponds and constructed wetlands for wastewater reclamation and reuse.

An on-site study on the operational performance of a combined eco-system of ponds and SF constructed wetland for municipal wastewater treatment and reclamation/reuse in Donging City, Shandong, China was carried out from January 2001 through October 2003. The removal efficiencies for various main parameters were: TSS 84.8 +/- 7.3%, BOD5 87.2 +/- 5.3%, CODCr 70.2 +/- 18.6%, TP 52.3 +/- 23.1%, and NH(3)-N 54.8 +/- 23.9% with effluent concentration of TSS 9.12 +/- 5.12 mg/l, BOD5 6.44 +/- 4.58 mg/l, CODCr, 42.8 +/- 6.7 mg/l, TP 0.94 +/- 0.27 mg/l and NH(3)-N 7.95 +/- 2.36 mg/l. In addition, the removal efficiencies for faecal coliforms and total bacteria were > 99.97% and > 99.998% respectively, which well meet Chinese National standards for effluent quality of municipal wastewater treatment plants. The composition of TSS was closely related to CODCr and BOD5 variations, and nitrification-denitrification is the major mechanism of nitrogen removal both in ponds and in wetlands. In addition, sedimentation also played an important role in the removal of TSS, nitrogen, phosphorus and BOD5. The removal efficiencies of various parameters, the number of species and biomass of biological community in the system increased gradually with the ecological maturation.     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

Tunnel stability and arching effects during tunneling in soft clayey soil

A series of centrifuge model tests and numerical simulations of these tests were carried out to investigate the surface settlement troughs, excess pore water pressure generation, tunnel stability and arching effects that develop during tunneling in soft clayey soil. The two methods were found to provide consistent results of the surface settlement troughs, excess pore water generation, and the overload factors at collapse for both single and parallel tunneling. The arching ratio describes the evolution of the arching effects on the soil mass surrounding tunnels and can be derived from the numerical analysis. The boundaries of the arching zones for both single tunneling and parallel tunneling were determined. In addition, the boundaries of the positive and negative arching zones were also proposed.