Arsenic and heavy metals in soils associated with regional geochemical anomalies in South-West England

Regional geochemical maps have shown extensive anomalies of arsenic, copper and other heavy metals in those parts of South-West England associated with mineralised zones around the granite intrusion. Studies in the vicinity of the River Tamar and of the metamorphic aureole around Dartmoor have confirmed significantly higher concentrations of arsenic and heavy metals in soils contaminated by mining, smelting and mineralisation compared with those from nearby control areas. Arsenic and copper show the greatest degree of enhancement ranging up to 900 ppm As and 2000 ppm Cu in both alluvial and upland topsoils within the Tamar area. Preliminary analyses indicate that the trace metal content of pasture herbage-reflects in part the degree of soil contamination. Maximum concentrations of 35 ppm As and 22 ppm Cu in autumn sampled herbage were found at contaminated sites compared with mean values of less than 0.5 ppm As and 8 ppm Cu in control areas. Geochemical reconnaissance surveys based on stream sediment sampling provide a useful indication of areas wherein widescale soil contamination may occur.     

Solar heating and night radiation cooling by a Roof Radiation Trap

The paper describes a new system, the Roof Radiation Trap, which utilizes solar energy for heating of buildings in winter and nocturnal radiation for cooling in summer. The radiation trap consists of fixed insulating layer separated from the flat roof and glazing, protected by hinged insulating panel, in the southern gap between the roof and the fixed insulation. This fixed insulating layer is covered by corrugated metal sheets, painted white, which serve as nocturnal radiators in summer.The radiation trap is integrated with the building, thermally as well as architecturally. In winter the sun energy penetrates through the glazing and is absorbed directly in the roof, which serves as a combined collector, storage for one night and heat distribution system.The hot air in the space between the flat roof and the fixed insulation is blown into a thermal storage of gravel, under the floor or inside the building. The stored heat is “recovered” by forced convection during cloudy days.In summer the penetration of solar radiation during daytime is prevented by the hinged insulating panel. At night the painted external metal layer is cooled by outgoing radiation and the air under the corrugations is blown into the space of the radiation trap and cools the roof, which, in turn, serves as a heat sink during the next day. Nocturnal evaporative cooling can supplement the radiant cooling.     

Analysis of Methods for Parallel Operation of Frequency Converters

Consideration is given to methods for the parallel operation of frequency converters by applying the active load division. The simulation model of the converter is presented. It consists of three parallel independent modules. A new principle of constructing individual modules of a frequency converter and the principle of their communication interface exhibiting resistance to destabilizing effects and allowing safe operation under nominal conditions even with a 5- to 10% range in time and amplitude values of pilot signals are developed.     

Electromagnetic Effect of an Alternating Current Traction Power Supply System with a High-Voltage Power Cord on Electrical Installations and Networks of Nontraction Consumers

Russian Electrical Engineering - In this paper, we ground a method for calculating switching overvoltages including the discharge of lightning currents into the contact network and into a...     

Diagnostics of Multioperation Processes Using Basic Cells of Digital Homogeneous Structures

Russian Electrical Engineering - The cells of homogeneous digital structures designed for multioperation process diagnostics are considered in the form of graphic models. Digital circuits and...     

Operational management of trunk main discolouration risk

Despite significant on-going investment, water companies continue to receive an unacceptable number of discolouration related customer contacts. In this paper, data from intensive distribution system turbidity monitoring and cluster analysis of discolouration customer contacts indicate that a significant proportion of these contacts are due to material mobilising from the trunk main system, and operational flow increases are shown to have a higher discolouration risk than burst incidents. A trunk main discolouration incident highlighting this risk is discussed, demonstrating the need for pro-active trunk main risk assessments. To identify the source of the material event flow rates were modelled using the PODDS (prediction of discolouration in distribution systems) discolouration model. Best practice pro-active management is demonstrated in a case study where the PODDS model is used to implement managed incremental flow changes on a main with known discolouration risk with no discolouration impact to customers and significant cost savings.     

Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

Fitting interrelated datasets: metabolite diffusion and general lineshapes

Objective

Simultaneous modeling of true 2-D spectroscopy data, or more generally, interrelated spectral datasets has been described previously and is useful for quantitative magnetic resonance spectroscopy applications. In this study, a combined method of reference-lineshape enhanced model fitting and two-dimensional prior-knowledge fitting for the case of diffusion weighted MR spectroscopy is presented.

Materials and methods

Time-dependent field distortions determined from a water reference are applied to the spectral bases used in linear-combination modeling of interrelated spectra. This was implemented together with a simultaneous spectral and diffusion model fitting in the previously described Fitting Tool for Arrays of Interrelated Datasets (FiTAID), where prior knowledge conditions and restraints can be enforced in two dimensions.

Results

The benefit in terms of increased accuracy and precision of parameters is illustrated with examples from Monte Carlo simulations, in vitro and in vivo human brain scans for one- and two-dimensional datasets from 2-D separation, inversion recovery and diffusion-weighted spectroscopy (DWS). For DWS, it was found that acquisitions could be substantially shortened.

Conclusion

It is shown that inclusion of a measured lineshape into modeling of interrelated MR spectra is beneficial and can be combined also with simultaneous spectral and diffusion modeling.