Influence of the preparation conditions on the size and morphology of nanocrystalline lanthanum orthoferrite

Nanocrystalline LaFeO₃ is prepared by the dehydration of coprecipitated lanthanum and iron(III) hydroxides. It is shown that the behavior of the samples during heating and the size distribution of LaFeO₃ nanocrystals can be considerably different depending on the scheme used for coprecipitation of lanthanum and iron hydroxides; independently of the method employed for coprecipitation of the initial compounds, sintering of the samples at 950°C leads to the formation of lanthanum orthoferrite crystals up to 100 nm in size.     

Utilizing Gorlovsk Basin anthracite in metallurgical production

The composition and physicochemical properties of Gorlovsk Basin anthracite are studied, with a view to expanding its metallurgical use. In industrial tests, anthracite is employed in smelting hot metal in cupola furnaces, in the production of carbonized products and briquets, in ferroalloy production, in sintering iron ore, and in batch for foundry coke.     

Optimizing the selective flocculation of coal by means of a selective reagent

The need to improve coal enrichment stems from the sharp deterioration in the coal being enriched (increasing ash and moisture content, content of small classes, rock content, etc.), which results from the widespread mechanization of mining operations, the development of high-ash deposits, and dust suppression [1].     

Testing a new composition of periclase spinel objects

On the basis of periclase powder (70%) and aluminomagnesia spinel (30%), synthesized from secondary aluminum production waste and caustic magnesite, test objects are produced of periclase spinel composition satisfying the requirements of GOST 1579-006-00190495-98. The articles are successfully tested in the working layer for lining tunnel furnace cars of OAO Kombinat Magnezit. __________ Translated from Novye Ogneupory, No. 8, pp. 16–17, August 2008.     

Heating furnace monolithic refractory lining

Contemporary solutions are presented for completion of a monolithic refractory lining for a heating furnace using products produced by OOO Keralit. __________ Translated from Novye Ogneupory, No. 3, pp. 80–83, March 2008.     

Granular-structure chromium-bearing refractories: Properties and uses

Results are presented on the corrosion resistance of chromium-bearing refractories of granular structure acted on by corrosive molten slags, metals, and glasses. It is possible to recommend these refractories to customers for particular conditions of use. Chromium-bearing refractories increase the working lives of furnaces considerably. __________ Translated from Novye Ogneupory, No. 1, pp. 55–61, January, 2008.     

Refractory objects and materials for continuous steel casting

In the OAO Borovich Refractory Combine production has been assimilated for a complete set of refractories for continuous steel casting, i.e. from a pipe for protecting a stream of metal to a submerged nozzle. In technical and life characteristics the products correspond to that of world analogs, they provide accident free steel pouring, make it possible to reduce the specific consumption of refractories per ton of steel, to increase CBCM productivity, to reduce billet scrap, and to reduce steel cost. Translated from Novye Ogneupory, No. 8, pp. 4–9, August 2008.     

Formation of the complex oxide NaNdTiO<Subscript>4</Subscript>

The processes of phase formation in the Na₂CO₃-TiO₂ and Na₂CO₃-TiO₂-Nd₂O₃ systems are investigated in the temperature range 600–900°C. The high-temperature solid-phase reactions underlying the process of formation of complex oxide NaNdTiO4 are studied. It is established that the synthesis of the NaNdTiO₄ compound occurs through the reaction of the intermediate product Na₈Ti₅O₁₄ with neodymium oxide in the temperature range 720–780°C. The optimum method is proposed for synthesizing NaNdTiO₄, which makes it possible to reduce the temperature of the synthesis, to avoid the formation of impurities, and to obtain the product in a finely dispersed state.     

Features of phase transitions in electrolyzer hearth block material between joints

Phase transitions are considered for silicon oxycarbide material between joints in hearth blocks under aluminum electrolyzer operating conditions. It is established that in the electrolyzer there is formation of aluminum subcarbide, and also there is conversion of silicon carbide polytypes as a result of impurities of aluminum, sodium, magnesium, copper and iron. Due to phase transitions there is a reduction in joint strength, and therefore it is undesirable to use material based on corundum and black silicon carbide in hearth joints between blocks for aluminum electrolyzers. Use of pure α-SiO₂ free from impurities is recommended for this purpose. Translated from Novye Ogneupory, No. 4, pp. 47–52, April 2008.