Effect of Drying on Particle Size and Sensitivities of Nano hexahydro-l,3,5-trinitro-l,3,5-triazine

Nano hexahydro-l,3,5-trinitro-l,3,5-triazine （RDX） was prepared using a bi-directional rotation mill and dried under different conditions （liquid, temperature and drying）. It shows that the samples cake seriously and the particles grow up obviously by ordinary drying in different liquids at 70 ℃, which occurs again after vacuum drying. With the increase of temperature, the degrees of caking and aggregation are enhanced. Well dispersed sample maintaining constant particle size is extracted by supercritical drying, especially freeze drying. Furthermore, the me- chanical sensitivities of I-RDX, O-RDX and F-RDX, of which the average sizes are 88.03 μm, 15.32 μm and 0.16 μm, respectively, are evaluated. Compared with I-RDX, the friction, impact and shock sensitivities of O-RDX are slightly lower. However, the friction, impact and shock sensitivities of F-RDX are reduced by 30%, 99.0% and 59.9%, respectively.     

一种阴-非离子型反应性乳化剂在乳液聚合中的应用

以马来酸酐、脂肪醇聚氧乙烯醚(AEO-7)为原料,合成了一种阴-非离子型反应性乳化剂(MA-7-Na)。探究了其在聚丙烯酸酯乳液聚合中的应用效果,并对聚合工艺条件进行优化。结果表明:采用MA-7-Na所得乳液的聚合稳定性、Ca2+稳定性和胶膜的耐水性都较好;最佳聚合工艺条件为:MA-7-Na用量5wt%,MAA用量1 wt%,保温时间1.5h。分别采用红外光谱和透射电镜对乳液的结构和形貌进行表征。     

Visible Light‐Initiated C(sp3)?Br/C(sp3)?H Functionalization of α‐Carbonyl Alkyl Bromides through Hydride Radical Shift

A new visible light‐initiated 1,5‐hydride radical shift strategy has been developed to enable the one‐step functionalization of both a C(sp³) Br bond and a C(sp³) H bond adjacent to the same carbon atom. This visible light photoredox catalysis offers a mild and straightforward access to diverse five‐membered carbocyclic ring‐fused polycyclic hydrocarbons with high turnover numbers (TONs; up to 4.93×10³) and broad substrate scope.

     

Cobalt‐Catalyzed,Imine‐Directed Olefin Hydroarylation under Grignard‐Free Conditions

We report here that a cobalt catalyst generated from a cobalt(II) salt and a ligand using magnesium metal is capable of promoting hydroarylation reactions through chelation‐assisted C−H activation. With the appropriate choice of the ligand and other reaction conditions, ketimine‐ or aldimine‐directed branched selective hydroarylations of styrenes and ketimine‐directed hydroarylations of vinylsilane have been achieved. The reported catalytic systems may serve as more convenient alternatives to previously developed catalytic systems employing Grignard reagents as reducing agents.

     

Influences of internal erosion on infiltration and slope stability

Bulletin of Engineering Geology and the Environment - Rainfall-induced slope failures in natural terrains are destructive natural disasters. Transport of fine particles may be induced by the...     

膨润土对Pb~(2+)的吸附及铝的影响研究

研究膨润土对水溶液中铅的吸附特性以及铝对铅吸附的影响。通过各组吸附实验,建立膨润土对水溶液中铅离子的吸附最佳条件,天然膨润土对铅的吸附平衡时间约为60 min,其吸附符合一级动力学方程;铅吸附最适p H=9;天然膨润土对水溶液中铅离子的吸附规律符合Freundlich等温方程和Langmuir等温方程,呈显著相关性;加入少量铝离子时,吸附除铅能力增强,但继续增加铝浓度,去除能力降低,该现象主要通过铝盐水解所致的p H变化起调节作用,电中和作用不明显。     

Powder Size Influence on Tensile Properties and Porosity for PM Ti_2AlNb Alloy Prepared by Hot Isostatic Pressing

Pre-alloyed powder of Ti_2AlNb alloy was prepared by electrode induction gas atomization method, and the powder was screened into fi ve kinds of powder size distribution. Fully dense Ti_2AlNb alloy was prepared by powder metallurgy(PM) using hot isostatic pressing. The properties of pre-alloyed powder and PM Ti_2AlNb alloy were tested. Results show that mean grain size of PM Ti_2AlNb alloy is infl uenced by powder particle size, but particle size has no signifi cant infl uence on tensile properties. Finer Ti_2AlNb powder has low Argon gas bubble ratio and high oxygen content, and poor fl owability of fi ner powder increases the degree of diffculty during degassing. As a result, big pores( 50 μm) are observed in PM Ti_2AlNb alloy prepared by fi ner powder and cause plasticity loss of tensile properties. In order to get a better comprehensive properties of PM Ti_2AlNb alloy, powder with an average size(～ 100 μm) is suggested.     

浅谈桥面铺装层裂缝产生的原因与修补措施

近年来,由于高速公路的损坏而导致的交通事故越来越多,所以逐渐引起了人们的重视。水泥混凝土桥面板破损往往是面积最大的、也是最严重的,其他比较常见的病害有桥面铺装层破损、开裂、错台、麻面和磨光等。     

基于Fuzzy理论的产品UE量化分析

通过建立用户体验模型,得到丰富的体验数据,必须对其进行量化分析,Fuzzy数学理论为该数据的分析提供了模糊评判的标准,使产品设计部门更直观地了解消费者的体验。