Functionalization of Tailored Porous Carbon Monolith for Decontamination of Radioactive Substances

As the control over radioactive species becomes critical for the contemporary human life, the development of functional materials for decontamination of radioactive substances has also become important. In this work, a three-dimensional (3D) porous carbon monolith functionalized with Prussian blue particles was prepared through removal of colloidal silica particles from exfoliated graphene/silica composite precursors. The colloidal silica particles with a narrow size distribution were used to act a role of hard template and provide a sufficient surface area that could accommodate potentially hazardous radioactive substances by adsorption. The unique surface and pore structure of the functionalized porous carbon monolith was examined using electron microscopy and energy-dispersive X-ray analysis (EDS). The effective incorporation of PB nanoparticles was confirmed using diverse instrumentations such as X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS). A nitrogen adsorption/desorption study showed that surface area and pore volume increased significantly compared with the starting precursor. Adsorption tests were performed with ¹³³Cs ions to examine adsorption isotherms using both Langmuir and Freundlich isotherms. In addition, adsorption kinetics were also investigated and parameters were calculated. The functionalized porous carbon monolith showed a relatively higher adsorption capacity than that of pristine porous carbon monolith and the bulk PB to most radioactive ions such as ¹³³Cs, ⁸⁵Rb, ¹³⁸Ba, ⁸⁸Sr, ¹⁴⁰Ce, and ²⁰⁵Tl. This material can be used for decontamination in expanded application fields.     

Integrity and cell-monolayer permeability of chitosan nanoparticles in simulated gastrointestinal fluids

The objective of this study was to assess the integrity and intestinal permeability of chitosan nanoparticles (CNPs) in simulated gastrointestinal fluids (SGIF). The cell-associated and transported chitosan was quantified and visualized after incubation of the CNPs with Caco-2 cell monolayer with/without SGIF treatment. In order to establish the role of proteins in the SGIF, CNPs were incubated with 4 proteins having different isoelectric points (pI). CNPs incubated with the fluids did not attach to the cell monolayer in contrast to the intact CNPs. Negatively-charged protein formed the complex with CNPs leading to particle size increase, but protected CNPs from disintegration. In contrary, positively-charged protein interacted with cross-linker causing disintegration of CNPs. CNPs incubated with the fluids did not attach to the cell monolayer in contrast to the intact CNPs. The results suggested that the surface charges of CNPs and proteins play a critical role in structural changes of CNPs in biological environment.     

pH-sensitive photocatalytic activities of TiO2/poly(vinyl alcohol)/poly(acrylic acid) composite hydrogels

The pH-sensitive photocatalytic system was prepared by embedding TiO₂ into poly(vinyl alcohol)/poly(acrylic acid) hydrogel. Two different type TiO₂/hydrogel composites, such as matrix and nanofiber, were prepared to investigate the morphological effects on the photocatalytic activity. TiO₂ was distributed uniformly in the composite hydrogel and kept the original anatase structure without any structural change. The photocatalytic activity of TiO₂ was evaluated based on the efficiency of photobleaching of dye. The photobleaching of dye was improved greatly as the pH was changed into basic condition and the larger surface area of hydrogel was available for TiO₂ by using nanofiber supports.     

Molecular dynamics study on nanotube-resonators with mass migration applicable to both frequency-tuner and data-storage-media

We investigated the cantilevered carbon-nanotube-resonator including electromigratively movable nanoparticle via classical molecular dynamics simulations and continuum model. The change of the effective mass value, which was closely correlated with the position change of the encapsulated nanoparticle, could be regressed by a power function, the resonance frequency of the carbon-nanotube-resonator could be tuned by controlling the nanoparticle’s position, and the possible frequency-shift-ranges then reached 18–85%. The suggested device could be served as a data-storage-media for electromechanical nonvolatile-memory as well as a frequency-tuner.     

Codes based on BCK-algebras

The notion of a BCK-valued function on a set is introduced, and related properties are investigated. Codes generated by BCK-valued functions are established.     

Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.     

A risk management approach to safety assessment of trenchless technologies for culvert rehabilitation

Proper functioning of culverts is not only critical to protecting the transportation system from flooding but also critical to maintaining the expected service life of the overall transportation system. During the service life of culverts, they deteriorate due to many reasons such as corrosion caused by road salt, blockage by debris and sediment, poor construction techniques, etc. Trenchless technologies have been used by several State Departments of Transportation (DOTs) to rehabilitate deteriorated drainage structures without disrupting the traffic and within a relatively short span of time. These technologies provide many benefits in terms of cost, time, quality, and expected service life. However, the safety aspects of these techniques have not been discussed and documented in detail probably due to the complexity and the lack of safety standards and specifications directly associated with the techniques. This paper discusses the application of a risk assessment framework to assess potential safety issues of currently available trenchless technologies for culvert rehabilitation. The findings of the study will provide additional information to improve the decision making process in selecting and planning culvert rehabilitation projects.     

Stretchable,Transparent Zinc Oxide Thin Film Transistors

Stretchable and transparent thin film transistors (TFTs) with intrisically brittle oxide semiconductors are built using a wavy structural configuration that can provide high flexibility and stretchability. After device fabrication procedures including high temperature annealing, the oxide semiconductor‐based TFT arrays can be transferred directly to plastic or rubber substrates, without an additional device process, using transfer printing methods. This procedure can avoid some of the thermal degradation problems associated with plastic or rubber substrates by separating them from the annealing procedure needed to improve the device performance. These design and fabrication methods offer the possibility of developing a new format of stretchable electronics.     

Fast Super‐Resolution Algorithm Based on Dictionary Size Reduction Using k‐Means Clustering

This paper proposes a computationally efficient learning‐based super‐resolution algorithm using k‐means clustering. Conventional learning‐based super‐resolution requires a huge dictionary for reliable performance, which brings about a tremendous memory cost as well as a burdensome matching computation. In order to overcome this problem, the proposed algorithm significantly reduces the size of the trained dictionary by properly clustering similar patches at the learning phase. Experimental results show that the proposed algorithm provides superior visual quality to the conventional algorithms, while needing much less computational complexity.     

A 10-bit 205-MS/s 1.0- mm2 90-nm CMOS Pipeline ADC for Flat Panel Display Applications

This paper describes a 10-bit 205-MS/s pipeline analog-to-digital converter (ADC) for flat panel display applications with the techniques to alleviate the design limitations in the deep-submicron CMOS process. The switched source follower combined with a resistor-switch ladder eliminates the sampling switches and achieves high linearity for a large single-ended input signal. Multistage amplifiers adopting the complementary common-source topology increase the output swing range with lower transconductance variation and reduce the power consumption. The supply voltage for the analog blocks is provided by the low drop-out regulator for a high power-supply rejection ratio (PSRR) under the noisy operation environment. The pipeline stages of the ADC are optimized in the aspect of power consumption through the iterated calculation of the sampling capacitance and transconductance. The ADC occupies an active area of 1.0 mm² in a 90-nm CMOS process and achieves a 53-dB PSRR for a 100-MHz noise tone with the regulator and a 55.2-dB signal-to-noise-and-distortion ratio for a 30-MHz 1.0-V_PP single-ended input at 205 MS/s. The ADC core dissipates 40 mW from a 1.0-V nonregulated supply voltage.