Spray pressure variation effect on the properties of CdS thin films for photodetector applications

Herein, we report the photosensing property of CdS thin films. CdS thin films were coated onto glass substrates via a spray pyrolysis method using different spray pressures. Prepared films were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and optical and photoluminescence spectroscopy. XRD analysis demonstrated the growth of crystalline CdS films with crystallite sizes varying from 26 to 29 nm depending on the pressure. The SEM and EDAX analyses revealed nearly-stoichiometric CdS films with smooth surfaces and slight variation in grain morphology due to pressure changes. Optical measurements showed a direct bandgap varying from 2.37 eV to 2.42 eV due to pressure changes. A photodetector was also fabricated using the grown CdS films; the fabricated photodetector exhibited good performance depending on the spray pressure. A spray pressure of 1.5 GPa resulted in high photoresponsivity and external quantum efficiency.     

Combustion synthesis of NbC/ZrO2 composites: Influence of Cr additives on the microstructure and mechanical properties

Composites of NbC/ZrO₂ reinforced with different weight ratios of Cr metal were prepared by dynamic compaction combustion from a blend of Nb₂O₅–Zr–Cr powders. Factors controlling the synthesis process, the microstructure, and the mechanical properties of the samples, such as Cr wt% and the compression loads were studied. The samples were characterized by XRD, SEM, porosity, and hardness measurements. The porosity value of the sample with no additives was high and reached 31.6 vol%. A sudden decrease in the sample porosity to 2.4 vol % was noticed for the sample containing 3.0 wt% of Cr. A high-density sample with less than 2.0 vol % porosity and maximum hardness of 1038 HV was produced using 5.0 wt% Cr under 300 MPa compression load. Detailed thermodynamic calculations for the effect of Cr additives on the physicochemical properties of the system were introduced.     

Impacts of conservation agriculture on soil aggregation and aggregate-associated N under an irrigated agroecosystem of the Indo-Gangetic Plains

We evaluated impacts of conservation agriculture (zero tillage, bed planting and residue retention) on changes in total soil N (TSN) and aggregate-associated N storage in a sandy loam soil of the Indo-Gangetic Plains. Cotton (Gossypium hirsutum) and wheat (Triticum aestivum) crops were grown during the first 3 years (2008–2011) and in the last year, maize (Zea mays) and wheat were cultivated. Results indicate that after 4 years the plots under zero tillage with bed planting (ZT-B) and zero tillage with flat planting (ZT-F) had 15 % higher TSN concentrations than conventional tillage and bed planting plots (CT-B) (0.63 g kg^?1 soil) in the 0–5 cm soil layer. CT-B plots had lower soil bulk density that ZT plots in that layer. Plots under ZT-B (0.57 Mg ha^?1) contained 20 % higher TSN stock in the 0–5 cm soil layer than CT-B plots (0.48 Mg ha^?1). However, tillage had no impact on TSN concentration or stock in the sub-surface (5–15 and 15–30 cm) soil layers. Thus, in the 0–30 cm soil layer, ZT-B plots contained 6 and 5 % higher (P > 0.05) TSN stock compared with CT-B (2.15 Mg N ha^?1) and CT-F (2.19 Mg N ha^?1) plots respectively after 4 years. Plots that received cotton/maize + wheat residue (C/M + W RES) contained 16 % higher TSN concentration than plots with residues removed (N RES; 0.62 g kg^?1 soil) in the surface (0–5 cm) layer. Plots with only cotton/maize residue (C/M RES) or only wheat residue (W RES) retention/incorporation had similar TSN concentrations and stocks in the subsurface layer. Plots under ZT-B also had more macroaggregates (0.25–8 mm) and greater mean weight diameter with lower silt + clay sized particles than CT-B plots in that layer. A greater proportion of large macroaggregates (2–8 mm) in the plots under C/M + W RES compared with N RES were observed. In the 5–15 cm soil layer ZT-B and C/M + W RES treated plots had more macroaggregates and greater mean weight diameter than CT-B and N RES treated plots, respectively. Because of the greater amount of large aggregates, plots under ZT-B and C/M + W RES had 49 and 35 % higher large macroaggregate-associated N stocks than CT-B (38 kg TSN ha^?1) and N RES (40 kg TSN ha^?1) plots, respectively, in the 0–5 cm soil layer, although aggregates had similar TSN concentrations in all plots. Both tillage and residue retention had greater effects on aggregate-associated N stocks in the 5–15 cm layers. In addition to N content within large macroaggregates, small macroaggregate-associated N contents were also positively affected by ZT-B and C/M + W RES. Tillage and residue retention interaction effects were not significant for all parameters. Thus, the adoption of ZT in permanent beds with crop residue addition is a better management option for improvement of soil N (and thus possibly a reduced dose of fertilizer N can be adopted in the long run), as the management practice has the potential to improve soil aggregation with greater accumulation of TSN within macroaggregates, and this trend would likely have additive effects with advancing years of the same management practices in this region.     

Bacillus cereus adhesion: an investigation of the physicochemical characteristics of surface and effect of bio adhesion on the properties of silicone

The initial microorganism adhesion on substrate is an important step for biofilm formation. The surface properties of the silicone and Bacillus cereus were characterized by the sessile drop technique. Moreover, the physicochemical properties (hydrophobicity; electron donor/electron acceptor) of surface adhesion and the impact of bio adhesion on the silicone were determined at different time of contact (3, 7, and 24?h). The results showed that the strain was hydrophilic (Giwi?=?3.37?mJ/m²), whereas the silicone has hydrophobic character (Giwi?=??68.28?mJ/m²). Silicone surface presents a weak electron-donor character (γ ^??=?2.2?mJ/m²) conversely to B. cereus that presents an important electron donor-parameter (γ ^??=?31.6?mJ/m²). The adhesion of B. cereus to silicone was investigated using environmental scanning electron microscope and image analysis was assessed with the Matlab^® program. After 3?h of contact, the data analysis, confirmed the bio adhesion with an amount of 9.610⁵?cfu/cm² adhered cells. After 24?h, the percentage of silicone covered reached 93%. Furthermore, despite the difference in hydrophohbicity, the interaction between B. cereus and substrata was favoured by the thermodynamic model of adhesion (ΔG _adhesion ?<?0). The real time investigation of the effect of B. cereus adhesion on the physicochemical properties of silicone has revealed that the substrata becomes hydrophilic (θ°?=?47.3, ΔGiwi?=?23.7?mJ/m²), after 7?h of contact. This bio adhesion had also favoured the increase of electron donor/acceptor character of silicone (γ ^??=?53.1?mJ/m² and γ ⁺?=?5.3?mJ/m²).     

Physicochemical characterization of actinomycetes isolated from decayed cedar wood: contact angle measurement

Physicochemical characterization of microorganism is very important in a wide range of scientific and technological fields. In this study, we reported the isolation and the molecular identification of actinomycetes recovered from cedar wood decay. The isolates named H5 and H8 were identified by 16S rDNA sequencing and were shown to belong to the genus Nocardia and Streptomyces, respectively. Furthermore, physicochemical proprieties including hydrophobicity, electron donor/acceptor, and the Lifshitz–van der Waals (γ^LW) of these strains were evaluated using contact angle measurements. The results showed that Nocardia sp. (H5) had a hydrophobic (ΔGiwi?=??78.56?mJ/m²) and a weak electron donor/acceptor character. In contrast, results from contact angle measurements showed that the surface free energy of Streptomyces strains (H2, H3, and H8) were ΔGiwi?=?20.71?mJ/m², ΔGiwi?=?30.63?mJ/m², and ΔGiwi?=?15.35?mJ/m², respectively, classifying these microorganisms as hydrophilic bacterium. Moreover, the three strains were predominantly electron donating (γ^–?) and exhibit a weak electron-accepting (γ⁺) character.     

Effects of Surfactants on the Properties of Styrene/Methacrylate–Type Superplasticizer in Cement Paste

Copolymer emulsion lattices based on styrene (St) with methacrylate monomers, were synthesized with composition ratio (5/5) in the presence of a co-surfactants that consists of dodecyl benzene sodium sulfonate with polyvinyl alcohol (DBSS/PVA) and DBBS with polyoxyethylene glycol monomethyl ether (DBBS/POE). The obtained latices were characterized by ¹H NMR, rheological and morphological techniques. The effect of latices on the physicomechanical properties of ordinary Portland cement (OPC) pastes was investigated. The results showed that the addition of water mixed to the cement with copolymer improves most of the specific characteristics of OPC.     

Synthesis and characterization of biodegradable poly(ester‐urethanes) based on bacterial poly(R‐3‐hydroxybutyrate)

A series of poly(R‐3‐hydroxybutyrate)/poly(ε‐caprolactone)/1,6‐hexamethylene diisocyanate‐segmented poly(ester‐urethanes), having different compositions and different block lengths, were synthesized by one‐step solution polymerization. The molecular weight of poly(R‐3‐hydroxybutyrate)‐diol, PHB‐diol, hard segments was in the range of 2100–4400 and poly(ε‐caprolactone)‐diol, PCL‐diol, soft segments in the range of 1080–5800. The materials obtained were investigated by using differential scanning calorimetry, wide angle X‐ray diffraction and mechanical measurements. All poly(ester‐urethanes) investigated were semicrystalline with T_m varying within 126–148°C. DSC results showed that T_g are shifted to higher temperature with increasing content of PHB hard segments and decreasing molecular weight of PCL soft segments. This indicates partial compatibility of the two phases. In poly(ester‐urethanes) made from PCL soft segments of molecular weight (M_n ≥ 2200), a PCL crystalline phase, in addition to the PHB crystalline phase, was observed. As for the mechanical tensile properties of poly(ester‐urethane) cast films, it was found that the ultimate strength and the elongation at the breakpoint decrease with increasing PHB hard segment content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 703–718, 2002     

Rheology of concentrated solutions of hyperbranched polyesters

The solution rheology of different generations of hyperbranched polyesters in N‐methyl‐2‐pyrrolidinone (NMP) solvent was examined in this study. The solutions exhibited Newtonian behavior over a wide range of polyester concentrations. Also, the relative viscosities of poly(amidoamine) (PAMAM) dendrimers in ethylenediamine were compared with those of the hyperbranched polyesters in NMP. Both types of dendritic polymers have relative viscosities that are exponential functions of their molar fraction in solution. The slopes of these relative viscosity curves show a linear relationship with respect to the generation number. PAMAM dendrimers have the greater slopes for each generation, reflecting their relatively larger intrinsic viscosity values.