多孔陶瓷的制备和应用研究进展

由于多孔陶瓷材料在化学工业、信息通讯、生物技术、环境能源等领域的广泛应用，近年来倍受关注。综述了多孔陶瓷的几种制备方法，并将多孔陶瓷在过滤材料、催化剂载体、生物材料、吸音隔热材料、敏感材料上的应用情况作了简要说明，充分肯定了多孔陶瓷对人类社会的作用。     

由双酚A结晶母液的裂解产物合成双酚A反应过程研究

对反应过程所需催化剂种类及其各影响因素进行了考察。研究表明，大孔强酸性离子交换树脂可替代无机酸作为催化剂用于该反应，其中以未经硫基化处理者为佳；原料中水分的存在不利于产物收率和质量，应控制水的质量分数在1％以下。本研究确定的较佳工艺条件为反应温度65℃，停留时间15min、苯酚／对－异丙烯基苯酚摩尔比20，对应的反应收率为98．5％。对双酚A副产物的处理提供了有效方法。     

苯乙烯/丙烯酸丁酯微乳液共聚物链段分布的研究

以苯乙烯/丙烯酸丁酯(St/BA)为共聚单体,进行了微乳液聚合反应,测定了共聚物组成和共聚单体的竞聚率。由竞聚率计算了共聚物分子的链段分布,分析了共聚物分子的微观结构。     

Scaled Jacobian transpose based control for robotic manipulators

This paper presents a scaled Jacobian transpose based control method for robotic manipulators as a modification of a conventional Jacobian transpose based method. The proposed method has several advantages such as it shows faster convergence and better tracking performance than the conventional method, furthermore, it does not have any singularity problem similar to the conventional method. The scaled Jacobian transpose is obtained by collecting each pseudoinverse of the column vector of the Jacobian matrix. The proposed method performs a given task well under singular configurations while minimizing the task error. Finally, a few comparative studies with the conventional method are provided to show the effectiveness of the proposed method through simulations.     

Multidisciplinary design modeling and optimizationfor satellite with maneuver capability

According to the mission of a satellite with maneuver capability, the collaborative optimization (CO) method was introduced for the satellite system design, and the related multidisciplinary design optimization (MDO) model was established. The possessing and needed velocity increments Δv and Δv _{n e e d} were taken as the measurement of maneuvering capability of the studied satellite, which were then combined with total mass of the satellite to form the optimization objective in the systematic level of the MDO problem. The design variables and constraints of the MDO problem dealt with disciplines or subsystems as guidance, navigation and control (GNC), power, and structure, and corresponding engineering analysis models were also built. A program system to solve the MDO problem wasdeveloped by integrating a non-nested CO method, the commercial and user-supplied codes on framework software iSIGHT. The result showed that the satellite performance could be obviously improved, which also indicates MDO technique is feasible and effective for the spacecraft design problem. The modeling and optimization procedure of the work can be referred for further research and engineering design.     

FO-CA:一种基于距离差异度组合权重的多属性数据分类方法

为了解决多属性数据分类问题,提出了一种基于模糊优选模型与聚类分析的分类方法(FO-CA)。首先由模糊优选模型得到有序综合指标数据集,其中在权重阶段提出了距离差异度并以此为依据构建了一种组合主客观权重的赋权方法;然后采用聚类分析将有序综合指标数据集聚类为几个簇进而分类;最后选取UCI中的Iris、Wine和Ruspini 3个数据集进行仿真实验。实验结果表明,该分类方法相比模糊优选方法及K-Means算法能获得更好的分类结果,对决策者有一定的参考价值。     

Thermal properties measurements of renatured gelatin using conventional and temperature modulated differential scanning calorimetry

The thermal properties of amorphous gelatin films and gelatin films with renatured structural order were measured by using conventional and temperature modulated differential scanning calorimetry (DSC). Different amounts of gelatin structural order associated with a melting enthalpic change in the DSC measurement were prepared based on different gelatin drying conditions. Two consecutive heating and cooling DSC measurements on the gelatin films showed that there was no change in the glass‐transition temperature (T_g) for the amorphous gelatin but there was a decrease in the T_g for the structural gelatin on the second DSC scan. This decrease was attributed to the plasticizing effect from the release of originally hydrogen‐bonded water associated with the structural gelatin. In addition, a reversing endotherm observed upon melting of the structural gelatin during a temperature modulated DSC measurement indicated that the transition of bound water to free water occurred as the partial triple‐helix gelatin melted. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1795–1801, 2006     

Oxygen enrichment from air through multilayer thin low‐density polyethylene films

Several multilayer thin low‐density polyethylene (LDPE) films were fabricated by blown thin film having a thickness of 7 μm and an area of 130 cm². They were characterized for their oxygen‐enrichment performance from air by a constant pressure–variable volume method in a round permeate cell with an effective area of 73.9 cm². The relationship between oxygen‐enrichment properties, including oxygen‐enriched air (OEA) flux, oxygen concentration, permeability coefficients of OEA, oxygen, nitrogen, as well as separation factor through the multilayer LDPE films, and operating parameters, including transfilm pressure difference, retentate/permeate flux ratio, temperature, as well as layer number, are all discussed in detail. It is found that all of the preceding oxygen‐enrichment parameters increase continuously with an increase of transfilm pressure difference from 0.1 to 0.65 MPa, especially for the trilayer and tetralayer LDPE films. The oxygen concentration and separation factor appear to rapidly increase within the retentate/permeate flux ratio below 200, and then become unchangeable beyond that, whereas the OEA flux and the permeability coefficients of OEA, oxygen, and nitrogen seem to remain nearly constant within the whole retentate/permeate flux ratio investigated, especially for the monolayer and bilayer LDPE films. The selectivity becomes inferior, whereas the permeability becomes superior, as the operating temperature increases from 23 to 31°C. The highest oxygen concentration was found to be 44.8% for monolayer LDPE film in a single step with air containing oxygen of 20.9% as a feed gas and operating pressure of 0.5 MPa at a retentate/permeate flux ratio of 340 and 23°C. The results demonstrate a possibility to prepare an oxygen‐enriching membrane directly from air, based on the easily obtained thin LDPE films. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3013–3021, 2002; DOI 10.1002/app.2331     

预加氢反应器的制造和检验

本文介绍了预加氢反应器的典型结构,分析了制造上的难点,有针对性地提出了解决难点的特殊工艺方案,记录了实际制造经验数据,对类似设备的制造有着重要的参考价值。     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.