Dilatometric investigations of fats

Summary 1. Dilatometric curves have been determined over the complete melting range for samples of prime steam lard, oleo oil, all-hydrogenated vegetable shortening, and partially hydrogenated cottonseed oil. From the dilatometric data estimates have been made of the percentages of solids and liquid in the fats at different temperatures. 2. Estimates of the percentages of solids and liquid in the hydrogenated cottonseed oil agreed with those previously reported on the same oil from calorimetric data when allowance was made for a lack of equilibrium conditions in the calorimetric experiment. Since a condition of equilibrium between solids and liquid is attained in the dilatometer, this instrument is to be preferred to the calorimeter for determining the composition of fats in terms of the two phases. 3. The consistency of the fats, as measured by micropenetrations, was different for different fats which contained equal percentages of solids. The consistency, therefore, is not determined solely by the amount of solids present, but also by the character of the solid particles. One of the laboratories of the Bureau of Agricultural and Industrial Chemistry, Agricultural Research Administration, U. S. Department of Agriculture.     

Contextual control over conditioned responding in an extinction paradigm.

Four experiments studied contextual control over rats' freezing to conditioned stimuli (CSs) that had been paired with shock and were then extinguished. In Experiment 1, rats were exposed to a CS A–shock and a CS B–shock pairing in Context C. CS A was then extinguished in Context A, and CS B in Context B. Freezing was renewed when each CS was presented in the context where the other CS had been extinguished. In Experiments 2–4, rats were exposed to a CS A–shock pairing in A and a CS B–shock pairing in B. They were then exposed to Context C where one, both, or neither of the CSs were extinguished, or where both CSs continued to be reinforced. On test, the rats froze more to CS A than to CS B in Context A, and more to CS B than to CS A in Context B, but only if the CSs had been extinguished. Thus, after extinction, rats use contexts to regulate retrieval not only of their memory for extinction, but also of their memory for the original conditioning episode. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Barrier and porous anodic oxides on InSb

Anodizing of InSb at 5 mA cm⁻² in sodium tungstate electrolyte is shown to produce barrier-type amorphous oxide at relatively low voltages, to about 40 V, and porous-type amorphous oxide at increased voltages. The barrier-type amorphous oxide, consisting of units of In₂O₃ and Sb₂O₃, distributed relatively uniformly throughout the film, develops at a formation ratio of 2.2 ± 0.2 nm V⁻¹. The outer 15–20% of the film also contains tungsten species. The relatively high efficiency of barrier film growth reduces significantly with transition to porous oxide, which is associated additionally with generation of oxygen at the film surface. The final oxide, at 65 V, comprises pores, of typical diameter 80 nm, orientated approximately normal to the substrate and extending from a barrier region to the film surface.     

ParaGraph: Graph editor support for parallel programming environments

We report here on a graph editor, ParaGraph, that supports massively parallel programming. It provides a flexible mechanism for the concise specification of families of annotated graphs, addressing the problems of user annotation and scale independent graph manipulation. ParaGraph currently serves as the basis for tools supporting communication abstractions in program specification and debugging. Its foundation in an extended form of aggregate rewriting graph grammars makes its adaptation to other parallel programming environments straightforward.The Parallel Programming Environments Project at the University of Massachusetts is supported by the Office of Naval Research under Contract N000014-84-K-0647 and by the National Science Foundation under Grants DCR-8500332 and CCR-8712410.     

A Recursive Algorithm for Computing Exact Reliability Measures

An algorithm is presented to find source-to-K-terminal reliability in a directed graph with independent arc failures. The algorithm is based on a discrete-time Markov chain with two absorbing states. The Markov chain has an upper triangular transition probability matrix, thus the probability of absorption in a state can be found by back-substitution. We show: 1) The source-to-K-terminal reliability is the probability of absorption in a particular absorbing state; 2) The time until absorption can be used as an alternative reliability measure; and 3) The algorithm can be used to find a third reliability measure called the degree of connectedness.     

A new type of color-comparator

Summary A convenient form of instrument has been devised for comparing the color of cottonseed oils with glasses of the Lovibond scale. In this apparatus each color must be made up by a combination of the same color glasses, one chemist cannot use a single 8.5 red glass and another a 5, a 3, and a 0.5 glass to get the 8.5 match, all are forced to use an 8 and a 0.5 red, superimposed for this 8.5 reading. The glasses are protected from dirt and scratches, and are easily revolved into the optical field by the turning of external nurled wheels. The total color, yellow + red, when a match is made, is indicated in a straight vertical line upon four concentric dials, thus diminishing the chances for error in recording the glasses used. A uniform light source, practically normal daylight, is provided in the instruments which will eliminate lack of agreement between different laboratories due to the use of various kinds of illumination. The author wishes to express his indebtedness to Mr. P. F. Ballenger formerly Chief Engineer of the Southern Cotton Oil Co., for his assistance in solving the mechanical difficulties incident to the building of this device, for without his help it would be merely a chemist contraption instead of a finished instrument.     

Computational methods in modern repair technology

This paper outlines recent developments in the computational analysis of bonded repairs to cracked structures. Several examples are given which compare the predicted and the observed behaviour for cracks in thin sheets and in thick sections.     

Prevalence and numbers of Salmonella and Campylobacter spp. on raw,whole chickens in relation to sampling methods

Salmonella and Campylobacter continue to be major foodborne pathogens and raw poultry is considered to be an important source of these bacteria. In this study, the prevalence and numbers of Salmonella and Campylobacter spp. in relation to isolation/sampling methods were determined in 241 whole raw chickens purchased from retail outlets in England during the winters of 1998/1999 (101 chickens) and 1999/2000 (140 chickens). The packaging of the 140 chickens was also examined for the presence of the above pathogens. The prevalence and numbers of enterococci were examined in 21 of the 101 chickens. In total, Salmonella and Campylobacter spp. were present in 25% and 83% of the chickens, respectively. Salmonella were isolated from a sample representing both the inside and outside of the packaging in 19% of the chickens, while the corresponding figure for Campylobacter spp. was 56%. Both of these pathogens were isolated from the outside of the packaging in 6% of the chickens. Salmonella was more frequently isolated from samples containing chicken skin in comparison with those containing carcass-rinse fluid only. Two chickens (0.8%) were positive for Salmonella by direct enumeration methods with contamination levels of log10 3.8 and 4.5 colony forming units (cfu) per carcass, respectively. The most prevalent serotypes were S. Hadar, S. Enteritidis and S. Indiana and two different serotypes were identified in 5/20 salmonella-positive chickens. Resistance to at least one antibiotic was found in 70% of the strains, 46% were multiresistant (resistant to > or = four drugs) and 52% showed a lowered susceptibility to ciprofloxacin. The likelihood of isolating Campylobacter spp. from neck-skin, carcass-rinse or carcass-rinse plus whole skin samples was similar, Campylobacter spp. were found in higher levels in carcass-rinse or carcass-rinse plus whole skin samples than in neck-skin. The log10 cfu of Campylobacter spp. were 2.70-4.99 in 18% of the chickens and 5.00-6.99 in 20%. Campylobacter isolates (425) comprised Campylobacter jejuni (98%) and C. coli (2%) and 98 different sero/phagetypes of these two species were identified. Resistance to at least one antibiotic was found in 73% of the strains and 13% were multiresistant. Thirteen percent of the strains showed lowered susceptibility to ciprofloxacin, while 4.9% were resistant to erythromycin. Vancomycin-resistant enterococci (VRE), able to grow on agar containing 15 mg l(-1) vancomycin (VRE15), were present in 19 chickens. The log10 cfu of VRE15 was 2.90-3.99 in 10 chickens and between 4.00 and 4.99 in two chickens. The data presented here contribute to risk assessment and highlight the need to continue to emphasise the safe handling of raw retail poultry.     

Effect of phosphate source,rate and cadmium content and use of Penicillium bilaii on phosphorus,zinc and cadmium concentration in durum wheat grain

Field studies were conducted over 3 years at several locations in Alberta and Manitoba, Canada to evaluate the impact of phosphate fertiliser containing varying concentrations of Cd on grain yield and P, Zn and Cd concentration in durum wheat grain. The effect of a seed treatment with Penicillium bilaii, a phosphate‐solubilising fungus, was also examined. P bilaii had little effect on crop yield, nutrient concentration or the concentration of Cd in the grain under the conditions of this study. Fertilisation with monoammonium phosphate consistently increased Cd concentration and Cd/Zn ratio and decreased Zn concentration in durum wheat. Increases in Cd concentration in durum wheat were unrelated to Cd concentration in the fertiliser, although the concentration of Cd in the fertiliser sources varied from 0.2 to 186.0 µg g^?1. Increased Cd concentration with phosphate application may be related to high ionic strength, reduced pH and enhanced root proliferation in the microregion around the fertiliser granules. Enhanced root development in response to phosphate fertilisation may increase the accumulation of Cd. Reduction in Zn accumulation associated with phosphate application may also contribute to the increase in Cd concentration in durum grain, possibly through enhancement of Cd translocation to the grain. While reduction in Cd concentration in phosphate fertilisers will reduce long‐term Cd accumulation in soils, use of low‐Cd fertiliser at commercially practical levels of fertilisation is unlikely to reduce Cd concentration in durum wheat in the year of application. © 2002 Society of Chemical Industry