Sliding wear behavior of salt bath nitrocarburized medium carbon steel

Salt bath nitrocarburizing is a well-known thermochemical diffusion process for enhancing the tribological and corrosion properties of ferrous components. The current work describes the role of a compound layer developed during nitrocarburizing, both in the ferritic and austenitic regimes of Fe-N-C system, on the sliding wear behavior of a medium carbon steel. The wear behavior of the nitrocarburized steel discs was assessed by the pin-on-disc tests (ASTM G 99-99) under different normal loads running against a hardened SAE52100 pin. It was observed that the compound layer on the surface not only controlled the wear rate but also resisted the adhesive wear/transfer of material from pin to disc, aside from providing low-friction coefficients.     

Solubility of polyethylene in n-pentane at high pressures

The high pressure solubility of polyethylene standards (M_w = 2100, 16400, 108000 and 420000 and M_w/M_n = 1.14, 1.16, 1.32 and 2.66, respectively) in n-pentane has been studied. Concentrations of up to 15 wt% polymer have been investigated. For each polymer sample and concentration, pressures that are required to achieve single-phase solutions have been determined over a range of temperatures. The solutions are found to all show lower critical solution temperatures. Demixing pressures are observed to depend strongly on the molecular weight of the polymer.     

A new characteristic of liquid-liquid systems—inversion holdup of intensely agitated dispersions

As the holdup of dispersed phase in an agitated liquid-liquid dispersion is increased at fixed agitation, a point is reached (called inversion holdup) when the dispersion inverts—the dispersed phase becomes continuous and vice versa. In this work, we present experimental data which suggest that the inversion holdup for sufficiently intense turbulence is independent of all the operational parameters associated with a stirred tank, e.g., stirrer speed, vessel volume, impeller size, and impeller type; it depends only on the properties of the liquid-liquid system. The inversion holdup was verified to remain unchanged even for inversion in turbulent flow field in the annular space between two coaxial cylinders. A hypothesis involving drops in near contact with each other at high holdups is used to explain the experimental data. The new finding may also provide a qualitative basis for selecting a liquid-liquid system with desired extent of mixing in the dispersed phase for carrying out transport and reactions in multiphase systems.     

Viscometric studies of starch-g-polyacrylamide composites

Composites of starch-g-polyacrylamide, starch, and polyacrylamide have been prepared by gamma radiation-initiated polymerization of acrylamide in the presence of starch in aqueous medium. The polymerization was studied as a function of the (i) amount of water (ii) monomer concentration, and (iii) total dose. The optimum conditions for maximum conversion of the monomer to homopolymer and graft copolymer have been evaluated. Percentage of grafting of polyacrylamide could not be determined precisely as both the homopolymer and the graft are soluble in common solvents and all attempts to separate the graft from the homopolymer were unsuccessful. However, the formation of the starch-g-polyacrylamide copolymer was confirmed by the turbidimetric studies using acetone as a nonsolvent. The products of polymerization of acrylamide in the presence of starch consisted of unreacted starch, starch-g-polyacrylamide, and polyacrylamide and is referred to as the composite. Acrylamide was also polymerized in the absence of starch using γ-rays as means of initiation and the optimum conditions for maximum conversion of acrylamide to polyacrylamide have been evaluated. Viscosity behavior of the composite and polyacrylamide was studied in aqueous medium at 30±0.04°C. The reduced specific viscosity of the aqueous solution of acrylamide and the composite as well was found to increase with increasing dilution, the effect being more pronounced in the composite. This tends to indicate that both the homopolymer and the composite behave as polyelectrolytes. An attempt has been made to explain the polyelectrolytic behavior of the homopolymer and the composite. © 1993 John Wiley & Sons, Inc.     

Phase behavior and density of polysulfone in binary fluid mixtures of tetrahydrofuran and carbon dioxide under high pressure: Miscibility windows

Mixtures of tetrahydrofuran (THF) and carbon dioxide (CO₂) were identified as new solvent systems for polysulfone. The miscibility and density of polysulfone in binary fluid mixtures of THF and CO₂ were investigated from 300 to 425 K at pressures up to 70 MPa. The influence of the CO₂ and polysulfone concentrations was studied, with the concentrations of the other two components kept constant. At a 4.5 wt % polymer concentration, the demixing pressures in a 10 wt % CO₂ and 90 wt % THF mixture increased with temperature (310–425 K) from 15 to 40 MPa. With increasing CO₂ concentration (from ca. 10 to 14 wt %), a significant increase (from 15 to 70 MPa at 310 K) was observed in the demixing pressures. Furthermore, with an increasing amount of CO₂, the nature of the phase boundary shifted from lower critical solution temperature behavior to upper critical solution temperature behavior. The influence of the polymer concentration was studied in the 0–5 wt % range at two CO₂ levels, with solvent compositions of 10 wt % CO₂ and 90 wt % THF and 13 wt % CO₂ and 87 wt % THF. The system with a higher level of CO₂ (13 wt %) showed highly unusual phase behavior: on pressure–composition and temperature–composition diagrams, the system displayed two distinct regions of miscibility. In the system with 10 wt % CO₂, the distinct regions of miscibility that were observed in the system with 13 wt % CO₂ partially overlapped and led to a W‐shape phase boundary. The densities of the polymer solutions were measured from the one‐phase region through the demixing point into the two‐phase region at a constant temperature. No significant change in density was found around the phase boundary; this indicated that the coexisting phases had similar densities, as is often the case with liquid–liquid phase separation in polymer solutions under high pressure. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2357–2362, 2002     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Confined batch foaming of semi-crystalline rubbery elastomers with carbon dioxide using a mold

Confined foaming of poly(ethylene-co-vinyl acetate-co-carbon monoxide) using carbon dioxide as a physical blowing agent in a mold with either permeable or impermeable boundaries has been explored as a strategy to control final foam dimensions and morphology. The results are discussed in terms of comparisons to free-foaming experiments conducted at the same pressure and temperature conditions following the same pressurization and depressurization paths. Foaming experiments were carried out at 30 and 40°C and 100, 200, and 300 bar followed by rapid depressurization of the foaming cell. Confined foaming led to smaller pores with more uniform distributions across the polymer cross-section. However, bulk foam densities of the foams generated under confinement were higher than those generated under the free-foaming mode. Surface characteristics and skin layer formation were altered by expansion against both the permeable and impermeable boundaries. Confined foaming promotes uniform pore distribution and overall dimensional uniformity and may impart surface texture but the trade-off is in the degree to which the bulk foam density can be lowered.     

Tensor Clustering for Rendering Many‐Light Animations

Rendering animations of scenes with deformable objects, camera motion, and complex illumination, including indirect lighting and arbitrary shading, is a long‐standing challenge. Prior work has shown that complex lighting can be accurately approximated by a large collection of point lights. In this formulation, rendering of animation sequences becomes the problem of efficiently shading many surface samples from many lights across several frames. This paper presents a tensor formulation of the animated many‐light problem, where each element of the tensor expresses the contribution of one light to one pixel in one frame. We sparsely sample rows and columns of the tensor, and introduce a clustering algorithm to select a small number of representative lights to efficiently approximate the animation. Our algorithm achieves efficiency by reusing representatives across frames, while minimizing temporal flicker. We demonstrate our algorithm in a variety of scenes that include deformable objects, complex illumination and arbitrary shading and show that a surprisingly small number of representative lights is sufficient for high quality rendering. We believe out algorithm will find practical use in applications that require fast previews of complex animation.     

Mobile service oriented architectures for NN-queries

The ever-increasing number of mobile device users has also raised the users’ expectation of mobile services accordingly. This phenomenon has given pressures to the mobile service providers to improve their services in order to stay competitive in the market. The service oriented approach is seen to be a promising scheme for mobile services. This paper presents mobile service oriented architectures for Nearest-Neighbor (NN) queries that are classified into five categories, namely (i) intermittent query mobile services, (ii) continuous query mobile services, (iii) context-aware mobile services, (iv) continuous moving object query mobile services, and (v) data broadcast mobile services. These services incorporate query, location and context-aware services, ontological context model, and broadcast. The proposed architectures are concerned with mobile services for clients on the move requesting services based on their current location, which is arguably the most important feature in a wireless environment. Furthermore, we also discuss the Quality-of-Service (QoS) requirement for mobile services in which request latency time is one of the most important parameters to consider. Some analytical models for query latency measurement are presented and the results are compared with the simulation experiments.