Effect of ozonation and ultrasonication pretreatment processes on co-digestion of tannery solid wastes

Studies were carried out by the application of ozonation and ultrasonication as pretreatment processes on primary and secondary sludge generated during treatment of tannery wastewater to enhance the soluble chemical oxygen demand (SCOD). Further, co-digestion (simultaneous digestion of two or more substrates) studies were carried out in batch reactors using the fleshings (a solid waste generated during the processing of raw hides or skins into finished leather) along with the primary and the secondary sludge wherein biogas generation was compared with and without pre-treated sludge using ozone and ultrasonication processes, respectively. It was found that, application of pretreatment processes enhanced biogas generation by 45% in the case of ozone pre-treated sludge and 53% by ultrasonication processes, respectively, in conjunction with the fleshings. However, considering the optimum contact time required, application of ultrasonication as a pretreatment process was found to be the most appropriate and viable process to enhance the SCOD. This pretreatment process has the potential for implementation in tanneries using the shortest possible ultrasonication time to minimize energy cost when compared with ozonation time.     

Constructing porous ZnO/SnO2 nanocomposites for the detection of methane at low operating temperature

Journal of Porous Materials - Aimed at detecting methane (CH4) gas at low operating temperature, porous ZnO/SnO2 nanocomposites were constructed through a simple two-step method. Pure SnO2 with a...     

Performance of cold sprayed Ni‐20Cr and Ni‐50Cr coatings on SA 516 steel in actual industrial environment of a coal fired boiler

Power plants are one of the major industries suffering from severe erosion–corrosion (E‐C) problems resulting in substantial losses. One way of tackling this problem is by the use of thermal spray coatings. In the current investigation a new emerging technique i.e. cold spray coating process was used to deposit Ni‐20Cr and Ni‐50Cr powder on SA 516 (grade 70) boiler steel. The bare as well as the coated steels were subjected to cyclic experimental studies, in the superheater zone of a coal fired boiler. Weight change, thickness loss, XRD, FE‐SEM/EDS and X‐ray mapping techniques were used to analyse the eroded‐corroded specimens. The uncoated steel showed weight gain after exposure in the actual boiler environment, whereas, for the coated steels there was initial weight loss followed by negligible weight change. Based upon thickness loss data the cold‐sprayed Ni‐50Cr coating was found to provide better E‐C resistance than the Ni‐20Cr coating.     

TrkB Receptor Signalling: Implications in Neurodegenerative,Psychiatric and Proliferative Disorders

The Trk family of receptors play a wide variety of roles in physiological and disease processes in both neuronal and non-neuronal tissues. Amongst these the TrkB receptor in particular has attracted major attention due to its critical role in signalling for brain derived neurotrophic factor (BDNF), neurotrophin-3 (NT3) and neurotrophin-4 (NT4). TrkB signalling is indispensable for the survival, development and synaptic plasticity of several subtypes of neurons in the nervous system. Substantial evidence has emerged over the last decade about the involvement of aberrant TrkB signalling and its compromise in various neuropsychiatric and degenerative conditions. Unusual changes in TrkB signalling pathway have also been observed and implicated in a range of cancers. Variations in TrkB pathway have been observed in obesity and hyperphagia related disorders as well. Both BDNF and TrkB have been shown to play critical roles in the survival of retinal ganglion cells in the retina. The ability to specifically modulate TrkB signalling can be critical in various pathological scenarios associated with this pathway. In this review, we discuss the mechanisms underlying TrkB signalling, disease implications and explore plausible ameliorative or preventive approaches.     

Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash

The residual compressive strength of concrete containing palm oil fuel ash (POFA) after exposure to elevated temperatures and subsequent cooling was investigated. Specimens from ordinary Portland cement (OPC) and POFA concrete mixes were prepared and subjected to various temperature levels. The POFA concrete contains 20% partial replacement of cement by weight and the temperature levels are; 100, 300, 500 and 800 °C. Two cooling systems which include cooling at room temperature by the natural breeze and water-spray were involved. Compressive strength test was conducted on control specimens as well as concrete specimens revived through the two cooling systems. Physical properties accompanying thermal degradations were also assessed. Residual performance as a ratio of residual strength to original strength was evaluated. The residual performance was found to be higher in POFA concrete than in the normal concrete. In addition, water-cooling was realized to aggravate strength reduction in both normal and POFA concretes when compared with air-cooling. High temperature and cooling system were also found to have great influence on physical properties, such as; mass loss, discolouration and crack patterns.     

The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics

In this study, the influence of the shape and size of the pores on the mechanical properties of the obtained porous HAP-based bioceramics was investigated. The porous HAP-based bioceramics were obtained starting from spherical calcium hydroxyapatite powder, obtained by hydrothermal syntheses. The number of shapeless inter-agglomerate pores decreased and amount of spherical intra-agglomerate pores increased on increasing the sintering temperature from 1100 °C to 1250 °C. The shape of pores also changed with thermal treatment of specimens; the small pores remained spherical while the larger pores became more spherical in shape, as was proved by image analysis. A three-dimensional, finite element unit cell model was applied to evaluate the influence of pore shape on the mechanical strength of HAP ceramics. By analyzing the effect of the shape of pores to the fracture toughness of sintered porous HAP bioceramics, it was observed that the more spherical the pores were, the tougher became the bioceramics. After sintering at 1250 °C for 2 h, measured toughness was 1.31 MPa m^1/2, which is a relatively high value for this type of bioceramics.     

Effect of phosphine on acid corrosion of iron

The effect of the phosphine-concentration (10^?8–10^?3 M) in strong acid solutions (pH = 0) on the corrosion rate of pure iron and Fe- 0.12% P alloy has been investigated. It was shown that at low concentrations (10^?7–10^?6M), phosphine accelerates the corrosion of iron, whereas at adequately high concentrations (10^?5–10^?3 M) it has inhibitory properties. In the presence of PH₃ the cathodic reduction of hydrogen ions is strongly accelerated. At the same time, the increase in PH₃ concentration causes an increase of surface coverage by PH₃ molecules, which results in the inhibition of both partial electrode processes.     

Design optimisation of a solar-energy harnessing system for stimulating an irrigation pump

Water from below ground level is to be raised, for the irrigation of a desert area near Cairo, Egypt, by harnessing solar power. The solar-energy collector is an array of gravity-return heat pipes, each surrounded by a cylindrical high-vacuum enclosure. The prime mover, in the form of a multi-vane expander, operates in an organic Rankine-cycle using trichlorotrifluoroethane as the working fluid. For specified conditions, the performances and optimal output temperatures of the collector (so that maximum overall efficiency of the system can be achieved) are predicted.     

A pattern based PSO approach for block matching in motion estimation

Block matching motion estimation is a popular method in developing video coding applications. A new algorithm has been proposed for reducing the number of search points using a pattern based particle swarm optimization (PSO) for motion estimation. The conventional particle swarm optimization has been modified to provide accurate solutions in motion estimation problems. This leads to very low computational cost and good estimation accuracy. Due to the center biased nature of the videos, the proposed approach uses an initial pattern to speed up the convergence of the algorithm. Simulation results show that improvements over other fast block matching motion estimation algorithms could be achieved with 31%～63% of search point reduction, without degradation of image quality.