A pattern based PSO approach for block matching in motion estimation

Block matching motion estimation is a popular method in developing video coding applications. A new algorithm has been proposed for reducing the number of search points using a pattern based particle swarm optimization (PSO) for motion estimation. The conventional particle swarm optimization has been modified to provide accurate solutions in motion estimation problems. This leads to very low computational cost and good estimation accuracy. Due to the center biased nature of the videos, the proposed approach uses an initial pattern to speed up the convergence of the algorithm. Simulation results show that improvements over other fast block matching motion estimation algorithms could be achieved with 31%～63% of search point reduction, without degradation of image quality.     

UHTC–carbon fibre composites: Preparation,oxyacetylene torch testing and characterisation

Current generation carbon–carbon (C–C) and carbon–silicon carbide (C–SiC) materials are limited to service temperatures below 1800 °C and materials are sought that can withstand higher temperatures and ablative conditions for aerospace applications. One potential materials solution is carbon fibre-based composites with matrices composed of one or more ultra-high temperature ceramics (UHTCs); the latter are intended to protect the carbon fibres at high temperatures whilst the former provides increased toughness and thermal shock resistance to the system as a whole. Carbon fibre–UHTC powder composites have been prepared via a slurry impregnation and pyrolysis route. Five different UHTC compositions have been used for impregnation, viz. ZrB₂, ZrB₂–20 vol% SiC, ZrB₂–20 vol% SiC–10 vol% LaB₆, HfB₂ and HfC. Their high-temperature oxidation resistance has been studied using a purpose built oxyacetylene torch test facility at temperatures above 2500 °C and the results are compared with that of a C–C benchmark composite.     

Use of micelles in photogalvanic cell for solar energy conversion and storage: Azur A-glucose system

Sodium lauryl sulphate (NaLS), tetradecyl trimethyl ammonium bromide (TTAB) and Brij-35 were used in a photogalvanic cell containing azur A as a photosensitizer and glucose as a reductant for solar energy conversion and storage. The photopotential and photocurrent generated by the cell in the presence of NaLS were 811.0 mV and 1470 μA, respectively. The effect of variation of the concentrations of the surfactants on the electrical output, the fill factor, the conversion efficiency and the performance of the cell in the dark was studied in detail.     

Characterization of Thermal-Sprayed HAP and HAP/TiO<Subscript>2</Subscript> Coatings for Biomedical Applications

In the present study, hydroxyapatite (HAP) coating along with HAP/TiO₂ coating has been deposited by high-velocity flame spray (HVFS) technique onto 316LSS. Titania was used as a bond coat and HAP as top coat in HAP/TiO₂ coating. The main aim of the study is to investigate the corrosion behavior of thermal spray coating of HAP and HAP/TiO₂ on steel. Electrochemical corrosion testing was carried out using potentiodynamic polarization test. The corrosion behavior of bare and as-sprayed specimens was analyzed in simulated body fluid known as Hank’s solution. As-sprayed specimens along with corroded specimens were further characterized by XRD, SEM/EDS, and x-ray mapping analysis. It was observed that the HAP/TiO₂ coating possessed higher microhardness (280 Hv) as compared to HAP coating (254 Hv). Surface roughness also got enhanced in case of HAP/TiO₂ coating (9.35 μm) as compared to pure HAP coating (7.37 μm). The porosity of the HAP coating was found to be higher than the bond coating. It was observed that the Ca/P ratio almost resembled that of the natural bone composition. The corrosion resistance of steel increased after the deposition of HAP and HAP/TiO₂ coatings. The maximum corrosion resistance was exhibited by HAP/TiO₂ coating.     

Tapered element oscillating microbalance (TEOM) studies of isobutane,n‐butane and propane sorption in β‐ and Y‐zeolites

A TEOM is used to elucidate the adsorption/desorption characteristics of alkylation reactants on USY‐ and β‐zeolites. Equilibrium adsorption isotherms were obtained on USY‐ and β‐zeolites using n‐butane, isobutane and propane as proxy reactant molecules (T = 303–398 K, adsorbate partial pressure 0–1.2 bar). Analysis of the transient adsorption/desorption profiles of these molecules from either a bed of the zeolite or pelletized particles of the crystals (with mean size < 1 μm) demonstrate that diffusion in the secondary meso‐/macroporous structure formed in the packing or the pellets controls the overall sorption rates. The experimental adsorption/desorption profiles from the pelletized zeolites were regressed with available mathematical models to obtain effective meso‐/macropore diffusivities for reactant molecules, and nearly perfect fits of the experimental and the modeled profiles. Taking into account the dead volume in the system, a criterion for reliable measurements of either micropore or mesopore diffusivities by the TEOM technique is derived. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Toward a CO2-free ethylene oxide process: Homogeneous ethylene oxide in gas-expanded liquids

Among industrial chemical processes, ethylene oxide manufacture emits the largest amount of CO₂ (∼2-3 million tons/yr), as byproduct from the burning of both the ethylene (feed) and ethylene oxide. Further, the conventional silver-based catalytic process presents safety challenges due to the formation of explosive ethylene oxide/O₂ mixtures in the gas phase. By judicious choice of the catalyst (methyltrioxorhenium), oxidant (H₂O₂) and reaction medium (methanol/water), a homogeneous liquid phase catalytic system has been demonstrated that eliminates CO₂ formation while producing ethylene oxide at >90% selectivity at near-ambient temperatures. Given its high volatility, the ethylene oxide is easily recovered from the reaction phase by distillation. The vicinity of the gaseous ethylene feed to its critical temperature (9 °C) is exploited to significantly increase its solubility in the liquid reaction phase by facile compression beyond the critical pressure of ethylene (∼50 bar). Since H₂O₂ is stable at typical reaction temperatures (40 °C or less), potentially explosive ethylene oxide/O₂ mixtures are avoided in the gas phase. In addition to the potential of arresting the carbon footprint of a large-scale industrial process, the demonstrated process concept shows how gas-expanded liquids can be generally exploited in homogeneous catalysis to enhance productivity.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

Evaluation of chemical indicators for tracking and apportionment of phosphorus sources to Table Rock Lake in Southwest Missouri, USA

This work evaluated the suitability of selected chemical species as indicators for tracking and apportionment of point and non-point phosphorus sources within the Table Rock Lake watershed in Southwest Missouri, USA. The species were evaluated with respect to their uniqueness to specific source types, their ability to be detected in both sources and receiving waters, and the consistency of their concentration ratios to phosphorus. Four sampling events were conducted at 15 sample locations in one year to collect water samples for measuring the concentrations of total and dissolved phosphorus, seven anions, and 19 major and trace elements. Current analytical methods were sensitive enough for quantification of most of the chemical species in both sources and the receiving waterbody. Due to the high seasonal variation of phosphorus concentrations in source samples, no chemical species had consistent concentration ratios to phosphorus across source types. However, several chemicals were found to be unique to specific sources; bromide ion can be used as a unique indicator for the effluent of the largest wastewater treatment plant in the watershed.