Fuel economy of multigrade gear lubricants

A light‐duty axle efficiency test for evaluating gear lubricants for their fuel economy performance is described. Data collected for an internal reference oil highlight the repeatability of the test with different axles. Comparisons between single‐grade SAE 90 and multigrade gear lubricants were made under a variety of pinion torques and speeds to simulate highway and city driving conditions. Lubricant rheology and its importance in maintaining film strength for adequate bearing and gear lubrication for optimum torque efficiency and axle temperature are discussed.     

Comparative Analysis of Coding and Non-Coding Features within Insect Tolerance Loci in Wheat with Their Homologs in Cereal Genomes

Food insecurity and malnutrition have reached critical levels with increased human population, climate fluctuations, water shortage; therefore, higher-yielding crops are in the spotlight of numerous studies. Abiotic factors affect the yield of staple food crops; among all, wheat stem sawfly (Cephus cinctus Norton) and orange wheat blossom midge (Sitodiplosis mosellana) are two of the most economically and agronomically harmful insect pests which cause yield loss in cereals, especially in wheat in North America. There is no effective strategy for suppressing this pest damage yet, and only the plants with intrinsic tolerance mechanisms such as solid stem phenotypes for WSS and antixenosis and/or antibiosis mechanisms for OWBM can limit damage. A major QTL and a causal gene for WSS resistance were previously identified in wheat, and 3 major QTLs and a causal gene for OWBM resistance. Here, we present a comparative analysis of coding and non-coding features of these loci of wheat across important cereal crops, barley, rye, oat, and rice. This research paves the way for our cloning and editing of additional WSS and OWBM tolerance gene(s), proteins, and metabolites.     

Multi‐carrier platform for wireless communications. Part 2: OFDM and MC‐CDMA systems with high‐performance,high‐throughput via innovations in spreading

Multi‐carrier technologies in general, and OFDM and MC‐CDMA in particular, are an integral part of the wireless landscape. In this second part of a two‐part survey, the authors present an innovative set of spreading codes known as CI codes, and demonstrate how these significantly increase performance and capacity in OFDM and MC‐CDMA systems, all the while eliminating PAPR concerns. Regarding OFDM: the spreading of each symbol over all N carriers using CI spreading codes (replacing the current one symbol per carrier strategy) are presented. CI codes are ideally suited for spreading OFDM since, when compared to traditional OFDM, CI‐based OFDM systems achieve the performance of coded OFDM (COFDM) while maintaining the throughput of uncoded OFDM, and, at the same time, eliminate PAPR concerns. When applied to MC‐CDMA, CI codes provide a simple means of supporting 2N users on N carriers while maintaining the performance of an N‐user Hadamard Walsh code MC‐CDMA system, i.e., CI codes double MC‐CDMA network capacity without loss in performance. The CI codes used in OFDM and MC‐CDMA systems are directly related to the CI pulse (chip) shapes used to enhance TDMA and DS‐CDMA (see part 1): hence, the CI approach provides a common hardware platform for today's multi‐carrier/multiple‐access technologies, enabling software radio applications. Copyright © 2002 John Wiley & Sons, Ltd.     

Run-to-run control of blood glucose concentrations for people with Type 1 diabetes mellitus

Run-to-run control has been applied to several traditional batch processes in the chemical industry. The 24-h cycle of eating meals, measuring blood glucose concentrations, and delivering the correct insulin bolus, with the goal of achieving the optimal blood glucose profile, can be viewed in the same spirit as traditional batch processes such as emulsion polymerization. In this paper, we aim to exploit the "repetitive" nature of the insulin therapy of people with Type 1 diabetes. A run-to-run algorithm is used on a virtual diabetic patient model to control blood glucose concentrations. The insulin input is parameterized into the timing and amount of the dose while the glucose output is parameterized into the maximum and minimum glucose concentrations. Robustness of the algorithm to variations in the meal amount, meal timing, and insulin sensitivity parameter is addressed. In general, the algorithm is able to converge when the meal timing is varied within +/- 40 min. If the meal size is underestimated by approximately 10 grams (g), the algorithm is able to converge within a reasonable time frame for breakfast, lunch, and dinner. If the meal size is overestimated by 20-25 g, the algorithm is able to converge. When random variations in the meal timing and the meal amount are introduced, the variation on the output variables, Gmax and Gmin, scales according to the amount of variation allowed. Along with this, the insulin sensitivity of the virtual patient model is varied. The algorithm is robust for differences in insulin sensitivity less than +/- 50% of the nominal value.     

Investigations on the Behavior of HVOF and Cold Sprayed Ni-20Cr Coating on T22 Boiler Steel in Actual Boiler Environment

High temperature corrosion accompanied by erosion is a severe problem, which may result in premature failure of the boiler tubes. One countermeasure to overcome this problem is the use of thermal spray protective coatings. In the current investigation high velocity oxy-fuel (HVOF) and cold spray processes have been used to deposit commercial Ni-20Cr powder on T22 boiler steel. To evaluate the performance of the coatings in actual conditions the bare as well as the coated steels were subjected to cyclic exposures, in the superheater zone of a coal fired boiler for 15 cycles. The weight change and thickness loss data were used to establish kinetics of the erosion-corrosion. X-ray diffraction, surface and cross-sectional field emission scanning electron microscope/energy dispersive spectroscopy (FE-SEM/EDS) and x-ray mapping techniques were used to analyse the as-sprayed and corroded specimens. The HVOF sprayed coating performed better than its cold sprayed counterpart in actual boiler environment.     

Performance projection of graphene nanomesh and nanoroad transistors

We examine the performance limits of field-effect transistors (FETs) with chemically modified graphene as the channel materials. Graphene nanoroad (XNR) and graphene nanomesh (XNM) can be created through selective chemical modification by an X adsorbate (either H or F) on graphene, which generates a bandgap while conserving the continuous two-dimensional (2D) atomistic layer. We adopt a ballistic transistor model, where the band structures were calculated using ab initio simulations to assess the performance of graphene nanoroad and nanomesh transistors. It is shown that arrays of graphene nanoroads, defined by hydrogenation or fluorination of atomically narrow dimer lines in a 2D graphene, are most ideal for transistor channel materials in terms of delivering a large ON-current, and significantly outperform Si metal-oxide-semiconductor field-effect transistors (MOSFETs). Alternatively, comparable performance to silicon can be achieved by careful design of a graphene nanomesh through patterned hydrogenation or fluorination. Both hydrogenation and fluorination lead to similar transistor performance, with fluorination more preferred in terms of chemical energetics.      

Accelerated Hot Corrosion Studies of D-Gun-Sprayed Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>–50% Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Coating on Boiler Steel and Fe-Based Superalloy

In the current investigation, Cr₂O₃–50% Al₂O₃ coating was deposited on ASTM-SA213-T-22 boiler steel and Fe-based superalloy Superfer 800H by D-gun spray process. The high-temperature corrosion performance of the coated as well as bare alloys was evaluated in Na₂SO₄–60%V₂O₅ molten salt, an aggressive environment at 900 °C under cyclic conditions. The kinetics of the corrosion were analyzed by the change in weight measurements which were taken after each cycle (i.e., 1-h heating in a tube furnace followed by 20-min cooling in ambient air) for a total period of 50 cycles. The X-ray diffraction and scanning electron microscopy/energy-dispersive X-ray analysis techniques were used for the analysis of corrosion products. During investigations, it was found that both the selected bare alloys have suffered intensive spallation in the form of removal of their oxide scales, which may be attributed to the formation of non-protective Fe₂O₃-dominated oxide scales, whereas the coated alloys have shown lesser weight gains along with better adhesiveness of the oxide scales with the substrate till the end of the experiment. The oxides of chromium and aluminum were the main phases revealed in the oxide scales of the coated specimens, which are reported to be protective against the hot corrosion.     

纳米二氧化钛薄膜制备方法研究进展

二氧化钛纳米晶薄膜优异的性能使其成为研究焦点,制备二氧化钛薄膜有着重要的现实意义。介绍了近年来国内外二氧化钛薄膜制备技术的研究进展,主要涉及高活性二氧化钛光催化薄膜的制备(制备方法包括溶胶-凝胶法、丝网印刷法、激光化学气相沉积法、水热结晶法、电泳法等),负载二氧化钛薄膜常用的载体,以及在环境保护等方面的应用研究现状,并指出以后的研究方向。     

Catalytic Hydroprocessing of p-Cresol: Metal, Solvent and Mass-Transfer Effects

A systematic study of the comparative performances of supported Pt, Pd, Ru and conventional CoMo/Al₂O₃, NiMo/Al₂O₃, NiW/Al₂O₃ catalysts as well as the effects of solvent, H₂ pressure and temperature on the hydroprocessing activity of a representative model bio-oil compound (e.g., p-cresol) is presented. With water as solvent, Pt/C catalyst shows the highest activity and selectivity towards hydrocarbons (toluene and methylcyclohexane), followed by Pt/Al₂O₃, Pd and Ru catalysts. Calculations indicate that the reactions in aqueous phase are hindered by mass-transfer limitations at the investigated conditions. In contrast, with supercritical n-heptane as solvent at identical pressure and temperature, the reactant and H₂ are completely miscible and calculations indicate that mass-transfer limitations are eliminated. All the noble metal catalysts (Pt, Pd and Ru) show nearly total conversion but low selectivity to toluene in supercritical n-heptane. Further, conventional CoMo/Al₂O₃, NiMo/Al₂O₃ and NiW/Al₂O₃ catalysts do not show any hydrodeoxygenation activity in water, but in supercritical n-heptane, CoMo/Al₂O₃ shows the highest activity among the tested conventional catalysts with 97?% selectivity to toluene. Systematic parametric investigations with Pt/C and Pt/Al₂O₃ catalysts indicate that with water as the solvent, the reaction occurs in a liquid phase with low H₂ availability (i.e., low H₂ surface coverage) and toluene formation is favored. In supercritical n-heptane with high H₂ availability (i.e., high H₂ surface coverage), the ring hydrogenation pathway is favored leading to the high selectivity to 4-methylcyclohexanol. In addition to differences in H₂ surface coverage, the starkly different selectivities between the two solvents may also be due to the influence of solvent polarity on p-cresol adsorption characteristics.     

Surface-enhanced Raman spectroscopy to probe reversibly photoswitchable azobenzene in controlled nanoscale environments

We apply in situ surface-enhanced Raman spectroscopy (SERS) to probe the reversible photoswitching of azobenzene-functionalized molecules inserted in self-assembled monolayers that serve as controlled nanoscale environments. Nanohole arrays are fabricated in Au thin films to enable SERS measurements associated with excitation of surface plasmons. A series of SERS spectra are recorded for azobenzene upon cycling exposure to UV (365 nm) and blue (450 nm) light. Experimental spectra match theoretical calculations. On the basis of both the simulations and the experimental data analysis, SERS provides quantitative information on the reversible photoswitching of azobenzene in controlled nanoscale environments.