Swelling of pH‐sensitive chitosan–poly(vinyl alcohol) hydrogels

The swelling properties of different chitosan–poly(vinyl alcohol) (PVA) hydrogels were investigated as functions of the medium pH and salt concentration. The maximum swelling ability of the hydrogels was at a buffer pH of approximately 3, regardless of the PVA content in the hydrogels. The maximum mass of the swollen hydrogels was about 13 times that of their contracted counterparts. The cyclical swelling and contraction between pH 3 and pH 7 buffers and pH 3 and pH 3 buffers with salt confirmed the Donnan swelling mechanism of these hydrogels. The swelling mechanism was considered the transfer of water molecules driven by a concentration gradient. This was represented by a simplified mass‐balance model, which neglected the effect of the ionization reaction, for the initial swelling period. The effective mass‐transfer coefficient of water molecules during swelling, estimated with this model, gradually decreased with increasing PVA content in the hydrogels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4665–4671, 2006     

Analysis of TRIPS Agreement and the justification of international IP rights protection in the WTO's multilateral trading system,with particular reference to pharmaceutical patents

The entry of the Trade-Related Aspects of Intellectual Property Rights (TRIPS) Agreement has seen the developing countries and the least developed countries (LDCs) suffer from the excessive burden of obligations imposed under the Agreement to embrace and implement a higher standard of intellectual property (IP) protection. One of the areas where the impact of the measures is most felt is on accessibility to affordable medicines for frontline treatment of diseases in developing countries and LDCs, where the majority of the HIV/AIDS sufferers come from. This inevitable plight, although well known, and posited by the developing countries and LDCs during the Uruguay round of negotiations, was overlooked. This also necessitated the Doha Deceleration, which does not seem to have addressed the problem. The developed countries have also successfully utilised the TRIPS Agreement's IP rights protection criteria as a benchmark, to develop a much higher IP rights protection agenda through the introduction of TRIPS-plus provisions in bilateral and other multilateral agreements entered into with developing countries. The winners in the game are the patent-holding pharmaceutical corporations, software corporations, media corporations, and the developed countries where they are incorporated. The ones at the receiving end are the developing countries and the LDCs who were promised technology transfer to build a modern economy by the developed countries, but are faced with multiple problems of non-availability of affordable medicines for health care, besides others. This article seeks to study the justification for an extended IP rights protection under the TRIPS Agreement through an analysis of the philosophical underpinnings of the IP rights and the patent regime. It will be argued that the TRIPS Agreement is a major obstacle that the developing countries and the LDCs have been made to face as Members of the WTO (World Trade Organisation), with no end in sight for their miseries, and that the only possible solution is a review or an amendment of the TRIPS Agreement.     

Application of fuzzy quality function deployment for sustainable design of consumer electronics products: a case study

With a steep increase in the demand for consumer electronics products, the contemporary manufacturers are committed toward sustainable development of such products. There exists a scope for developing a methodology for enabling sustainable development of consumer electronics products. In this context, fuzzy quality function deployment (QFD) approach has been presented in this article in order to prioritize relevant customer requirements, sustainability parameters and sustainability initiatives. Key influential parameters for sustainable development of consumer electronics products have been identified from the literature. In the first phase of fuzzy QFD, parameters influencing sustainable development have been prioritized in accordance with customer requirements. In the second phase, environmental design initiatives have been prioritized based on critical sustainability parameters. From phase I of fuzzy QFD, ‘reduction in environmental release’ has been found as the most significant sustainability parameter with a crisp value of 22.83, and from phase II, environmental impact assessment is proved to be the significant design method with a crisp value of 20.40. The methodology would provide a comprehensive understanding to practitioners on the interrelationships among customer requirements, sustainability parameters and environmentally benign initiatives for development of consumer electronic products. The generic model developed can be applied to most of the consumer electronics product     

Proteome of human endometrium: Identification of differentially expressed proteins in proliferative and secretory phase endometrium

Purpose: To exploit the potential of proteomics to identify and study additional yet‐unidentified important proteins present in human endometrium. Experimental design: The proteome of human endometrium would be established using 2‐DE and MALDI and the data analyzed to identify differential protein expression in the proliferative and secretory phase of the menstrual cycle using PDQuest software and MALDI. Results: In the present work, 2‐DE of human endometrium protein led to the resolution of over 200 spots. Subsequent MALDI analysis of 215 spots allowed the identification of 194 proteins. A total of 57 out of the 215 spots were found to be differentially expressed, out of which 49 could be identified using MALDI. These differentially expressed proteins included structural proteins, molecular chaperones, signaling proteins, metabolic proteins, proteins related to immunity, RNA biogenesis, protein biosynthesis and others. The differential expressions of seven representative proteins in secretory and proliferative phase endometrium tissue were confirmed by immunoblot analysis. Conclusion and clinical relevance: This study establishes the 2‐D proteome of human endometrium represented by 194 identified protein spots. The present data provides an important clue towards determining the function of these proteins with respect to endometrium related diseases.     

Simultaneous optimal selection of design and manufacturing tolerances with alternative manufacturing process selection

Tolerance specification is an important part of mechanical design. Design tolerances strongly influence the functional performance and manufacturing cost of a mechanical product. Tighter tolerances normally produce superior components, better performing mechanical systems and good assemblability with assured exchangeability at the assembly line. However, unnecessarily tight tolerances lead to excessive manufacturing costs for a given application. The balancing of performance and manufacturing cost through identification of optimal design tolerances is a major concern in modern design. Traditionally, design tolerances are specified based on the designer’s experience. Computer-aided (or software-based) tolerance synthesis and alternative manufacturing process selection programs allow a designer to verify the relations between all design tolerances to produce a consistent and feasible design. In this paper, a general new methodology using intelligent algorithms viz., Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II) and Multi Objective Particle Swarm Optimization (MOPSO) for simultaneous optimal selection of design and manufacturing tolerances with alternative manufacturing process selection is presented. The problem has a multi-criterion character in which 3 objective functions, 3 constraints and 5 variables are considered. The average fitness factor method and normalized weighted objective functions method are separately used to select the best optimal solution from Pareto optimal fronts. Two multi-objective performance measures namely solution spread measure and ratio of non-dominated individuals are used to evaluate the strength of Pareto optimal fronts. Two more multi-objective performance measures namely optimiser overhead and algorithm effort are used to find the computational effort of NSGA-II and MOPSO algorithms. The Pareto optimal fronts and results obtained from various techniques are compared and analysed.     

Cryo-X-ray analysis-A novel tool to better understand the physicochemical reactions at the bioglass/biological fluid interface

The present study deals with the short-term physicochemical reactions at the interface between bioactive glass particles [55SiO(2)-20CaO-9P(2)O(5)-12Na(2)O-4MgO. mol%] and biological fluid (Dulbecco Modified Eagle's Medium (DMEM)). The physicochemical reactions within the interface are characterized by scanning transmission electron microscopy (TEM) (STEM) associated with Energy-dispersive X-ray spectroscopy (EDXS). Microanalysis of diffusible ions such as sodium, potassium, or oxygen requires a special care. In the present investigation the cryo-technique was adopted as a suitable tool for the specimen preparation and characterization. Cryosectioning is essential for preserving the native distribution of ions so that meaningful information about the local concentrations can be obtained by elemental microanalysis. The bioglass particles immersed in biological fluid for 24 h revealed five reaction stages: (i) dealkalization of the surface by cationic exchange (Na(+), Ca(2+) with H(+) or H(3)O(+)); (ii) loss of soluble silica in the form of Si(OH)(4) to the solution resulting from the breakdown of Si--O--Si bonds (iii); repolymerization of Si(OH)(4) leading to condensation of SiO(2)); (iv) migration of Ca(2+) and PO(4) (3-) to the surface through the SiO(2)-rich layer to form CaO-P(2)O(5) film; (v) crystallization of the amorphous CaO-P(2)O(5) by incorporating OH-- or CO(3) (2-) anions with the formation of three different surface layers on the bioactive glass periphery. The thickness of each layer is approximately 300 nm and from the inner part to the periphery they consist of Si--OH, which permits the diffusion of Ca(2+) and PO(4) (3-) ions and the formation of the middle Ca--P layer, and finally the outer layer composed of Na--O, which acts as an ion exchange layer between Na(+) ions and H(+) or H(3)O(+) from the solution.     

Restoration of saline greenhouse soil and its effect on crop’s growth through in situ field-scale electrokinetic technology

An in situ electrokinetic (EK) system was designed and applied to highly saline greenhouse soil with a view to investigating the effects of the EK process on growing crops. In situ EK tests in field scale were conducted on the salt accumulated lands in the greenhouse where cabbages and lettuces were being cultivated. A voltage gradient of 0.25–0.6 V cm^?1 was applied for 50 days in the cultivated lands. The changes in the process, viz. current, voltage, and soil temperatures, were monitored. After the EK process, the initial electrical conductivity (EC, 6.0 dS m^?1) of the soil was reduced to about 1.7 dS m^?1 homogeneously below the recommended value (2.5 dS m^?1). The growth rate of cabbages and lettuces under EK treatment was about twice higher than those in the untreated area. The present study revealed that the EK process encourages the growth of the crops considerably and also removes the salts in the soil efficiently during the growth of the crops.     

Effect of adhesive‐coated glass fiber in natural rubber (NR), acrylonitrile rubber (NBR), and ethylene–propylene–diene rubber (EPDM) formulations. I. Effect of adhesive‐coated glass fiber on the curing and tensile properties of NR,NBR, and EPDM formulations

Adhesive‐coated glass fibers (3 and 6 mm in length) were added at loadings of 10, 20, and 30 phr in natural rubber (NR), nitrile rubber (NBR), and ethylene–propylene–diene comonomer (EPDM) formulations in both plain and carbon black mixes. The compounds were mixed in a two‐roll mill and were characterized for their cure properties, tensile, tear, and Mullin's effect. In NR mixes, all of the formulations showed reversion in cure behavior, suggesting that NR remained unaffected. In NBR and EPDM mixes, almost all of the mechanical properties of the fiber improved. The result was more significant in EPDM than in NBR. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1111–1123, 2004     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.