The rheological properties at small (oscillatory shear) and large (uniaxial compression) deformations of heat-induced gels (80 °C for 20 min, pH 7.3) containing 25% rennet casein (RCN), 2.5% disodium phosphate and 0%, 2.3% or 6.3% of whey protein isolate (WPI) were measured for samples cooked in a torque-rheometer at mixing speeds within a range of 20–200 rpm (shear rates: ∼15–230 s−1). In addition, microstructure analyses were performed, separately staining RCN and WPI, by Confocal Scanning Laser Microscopy (CSLM). Both small and large deformation tests indicated that increasing addition of WPI prior to the cooking process of RCN resulted in gels exhibiting higher storage and deformability moduli than WPI-free samples. Increasing shear rates during cooking also affected the rheological properties of RCN–WPI gels, and stronger gels were formed as the shear rate during cooking was increased. Despite the data dispersion among replicates, the effect of shear rate on gel strength were evident for RCN gels with 6.3% WPI and relatively clear for gels with 2.3% WPI; however, the trend was uncertain for WPI-free RCN gels. Possible explanations for this observation are that when increasing WPI levels in the presence of RCN and heat, disulfide-thiol exchange reactions between denatured WPI and κ-casein (κ-CN) are increased and possibly promoted by shear rate, resulting in stronger and more cross-linked gel structure. CSLM results were not conclusive to support this hypothesis. 相似文献
Based on the crystal structures of human α‐GalCer–CD1d and iNKT–α‐GalCer–CD1d complexes, nonglycosidic analogues of α‐GalCer were synthesized. They activate iNKT cells resulting in dendritic cell maturation and the priming of antigen‐specific T and B cells. Therefore, they are attractive adjuvants in vaccination strategies for cancer and infectious diseases.
In this work, lanthanum phosphate with a 20% yttria (LaPO4/Y2O3) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO4. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively. 相似文献
Fermented plant beverages (FPB) with a high content of desirable principle components are served as functional foods from several years. Hericium erinaceus is famous for its antimicrobial, antioxidant, antihypertensive and antidiabetic nature. Accordingly, the current study was aimed to produce fermented H. erinaceus juice with a high content of L‐glutamine (Gln) and L‐glutamic acid (GA) through lactic acid bacteria (LAB) isolated from fermented Thai foods. LAB isolates were screened and identified the potent protease‐producing bacteria Enterococcus faecalis (G414/1) that facilitate the production of Gln and GA through protein hydrolysis. Box–Behnken design (BBD) and response surface methodology (RSM) were adapted for the optimisation of conditions for the increased production of Gln and GA during fermentation of H. erinaceus. We succeeded with an optimum concentration of cofactor (CaCl2), pH and temperature for improved protease activity and subsequent Gln and GA production. The ability of isolated E. faecalis strain to produce Gln and GA was demonstrated in this study. Further, upstream processes like strain improvement and media optimisation will direct the way to produce enriched H. erinaceus based FPB. 相似文献
A flow process with time delay has been considered for modeling and control. A dilute solution of sodium chloride is used as tracer and an online conductivity measurement unit as sensor and recorder. The objective of the current study is to design control algorithms and present corresponding robust control analysis for the process. The control methodologies considered are (i) conventional PID control and (ii) internal model control (IMC). The control structures are comparatively analyzed using standard robustness measures for stability and performance. Of the two control algorithms, conventional PID and IMC, IMC exhibits faster settling time, no overshoot, better set-point tracking and disturbance rejection, and good robust performance than the PID control scheme. 相似文献
Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni?Mo?S and Ni?Fe?S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni2+ is optimized to attain hierarchical Ni?Mo?S and Ni?Fe?S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni?Mo?S and Ni?Fe?S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g?1 at 1 mA cm?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni?Mo?S NS//Ni?Fe?S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm?3, excellent energy density of ≈82.13 Wh kg?1 at 0.561 kW kg?1, exceptional power density (≈13.103 kW kg?1 at 61.51 Wh kg?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes. 相似文献
Novel biological vascular conduits, such as decellularized tissue engineered vascular grafts (TEVGs) are hindered by high thrombogenicity. To mimic the antithrombogenic surface of native vessels with a continuous glycosaminoglycan layer that is present on endothelial cells (ECs), a hyaluronic acid (HA) modified surface is established, to effectively shield blood platelets from collagen‐triggered activation. Using the amine groups present on 4 mm diameter decellularized TEVGs, a continuous HA hydrogel coating is built via a bifunctional thiol‐reactive cross‐linker, thereby avoiding nonspecific collagen matrix cross‐linking. The HA hydrogel layer recreates a luminal wall, “hiding” exposed collagen from the bloodstream. In vitro blood tests show that adhered platelets, fibrinogen absorption, and fibrin formation on HA‐coated decellularized TEVGs are significantly lower than on uncoated decellularized TEVGs. The HA surface also inhibits macrophage adhesion in vitro. HA‐coated decellularized syngeneic rat aortae (≈1.5 mm diameter), and TEVGs in rat and canine models, respectively, are protected from aggressive thrombus formation, and preserve normal blood flow. Re‐endothelialization is also observed. HA‐coated TEVGs may be an off‐the‐shelf small‐diameter vascular graft with dual benefits: antithrombogenic protection and promotion of endothelium. 相似文献