I-convergence in probabilistic n-normed space

In this article we introduce the notion of I-Cauchy sequence and I-convergent sequence in probabilistic n-normed space. The concept of I*-Cauchy sequence and I*-convergence in probabilistic n-normed space are also introduced and some of their properties related to these notions have been established.     

Coarse head pose estimation of construction equipment operators to formulate dynamic blind spots

Several hundred workers die in construction in the United States every year because equipment operators are unable to see their fellow workers during operation of their vehicle. In this paper we propose a step towards improving this situation by providing an automated method based on range imaging for estimating the coarse head orientation of a construction equipment operator. This research utilizes commercially-available low resolution range cameras to measure the continuously changing field-of-view (FOV) of an equipment operator in outdoor construction. This paper presents a methodology to measure so-called dynamic blind spot maps. The dynamic blind spot map is then projected on a known static equipment blind spot map that already exists to each construction vehicle. A robust computational coarse head pose estimation algorithm and results to three different pieces of construction equipment and multiple operators are presented. The developed method has the potential in automatically determining the spaces around vehicles that are currently not in the field-of-view of the vehicle operator thus providing eventually additional means and technology for improving safety in construction.     

BFO optimized RLS algorithm for power system harmonics estimation

In this paper a new estimation approach combining both Recursive Least Square (RLS) and Bacterial Foraging Optimization (BFO) is developed for accurate estimation of harmonics in distorted power system signals. The proposed RLS–BFO hybrid technique has been employed for estimating the fundamental as well as harmonic components present in power system voltage/current waveforms. The basic foraging strategy is made adaptive by using RLS that sequentially updates the unknown parameters of the signal. Simulation and experimental studies are included justifying the improvement in performance of this new estimation algorithm.     

Radiation-induced modification of polyurethane with hydroxyethyl methacrylate: blood compatibility

An attempt is made to develop the hydrophilic grafting of polyether urethane urea with hydroxyethyl methacrylate (hema) using⁶⁰Coγ-irradiation for achieving optimum hydrophilic/hydrophobic property needed towards blood compatibility. Contact angle method and platelet adhesion from calf’s blood are used to determine the suitability of these modified surfaces.     

Photographing impact of molten molybdenum particles in a plasma spray

Plasma-sprayed molten molybdenum particles (∼40 μm in diameter) were photographed impinging at high velocity (∼140 m/s) on a glass substrate at room temperature. An optical sensor detected thermal radiation emitted by a droplet as it approached the substrate and activated a time delay unit. After a selected time interval, an Nd:YAG laser was triggered, emitting a 5 ns pulse that provided illumination for a charge-coupled device (CCD) camera to photograph the impacting droplet through a long-range microscope. By varying the delay before pulsing the laser, different stages of droplet deformation were recorded. Impacting droplets spread into a thin circular film that ruptured and broke into small fragments. An optical detector recording thermal radiation from the impacting droplet gave a signal that increased as the droplet spread out, reached a maximum when the liquid film began to rupture, and decreased as portions of the droplet recoiled because of surface tension and then flew out of view of the photodetector.     

A Numerical Investigation of Heat Suppression in HEMT for Power Electronics Application

Silicon - In this paper, AlGaN/GaN High Electron Mobility Transistor (HEMT) with stacked passivation (Diamond/SiN) is proposed and investigated. The implementation of stacked passivation in HEMT...     

Studies on phytosterol oxides. II: Content in some vegetable oils and in French fries prepared in these oils

Hydrogenated rapeseed oil/palm oil blend, sunflower oil and high-oleic sunflower oil, and French fries fried in these oils were assessed for contents of sterol oxidation products. Different oxidation products of phytosterols (7α- and 7β-hydroxy-sito-and campesterol, 7-ketosito- and 7-ketocampesterol, 5α,6α-epoxy-sito- and campesterol, 5β,6β-epoxy-sito-and campesterol, dihydroxysitosterol and dihydroxycampesterol) were identified and quantiated by gas chromatography (GC) and GC-mass spectroscopy. Rapeseed oil/palm oil blend contained 41 ppm total sterol oxides before frying operations. After two days of frying, this level was increased to 60 ppm. Sunflower oil and high-oleic sunflower oil had 40 and 46 ppm sterol oxides, respectively, before frying operations. After two days of frying operations, these levels increased to 57 and 56 ppm, respectively. In addition to campesterol and sitosterol oxidation products, small amounts of 7α- and 7β-hydroxystigmasterol were detected in the oil samples. Total sterol oxides in the lipids of French fries fried at 200°C in rapeseed oil/palm oil blend, sunflower oil, and high-oleic sunflower oil were 32, 37, and 54 ppm, respectively. The levels of total oxidized sterols, calculated per g sample, ranged from 2.4 to 4.0 ppm. In addition to the content of phytosterol oxides, full scan mass spectra of several oxidation products of stigmasterol are reported for the first time. Part of these results were presented at the 86th Annual Meeting of the AOCS, May 7–11, 1995, San Antonio, TX.     

Measurement of Adhesive Bond Properties Including Damage by Dynamic Mechanical Thermal Analysis of a Beam Specimen

A method to obtain mechanical properties using a bonded (double) cantilever beam (or three point bend) specimen loaded in a manner to produce pure shear in the adhesive layer is reviewed. A revised mathematical solution which allows for easier interpretation of optimum beam dimensions to the one originally developed by Moussiaux, Cardon and Brinson for the static case is presented. An extension of this solution for a fixed/fixed viscoelastic beam under steady state oscillations developed by Li, Dickie and Morman is also discussed. Previous results using a vibrating beam to determine the complex viscoelastic properties of a bonded beam are reviewed. These results demonstrate conclusively that dynamic mechanical thermal analysis (DMTA) measurements discriminate differences in surface treatments and various environmental conditions. New measurements are presented that indicate the DMTA procedure can be used to quantify damage simulated by imbedded flaws in beams. The procedure is also shown to assess the effects of both humidity and corrosive environments on lap specimens. It is suggested that this technique may ultimately provide a method to quantify the amount of hidden damage in an adhesive joint subjected to fatigue, moisture or corrosive environments.     

Measuring individual corrective reaction time using the intermittent illumination model

The corrective reaction time (t_cr) is an essential motor property when modelling hand control movements. Many studies designed experiments to estimate t_cr, but reported only group means with inconsistent definitions. This study proposes an alternative methodology using Drury's (1994) intermittent illumination model. A total of 24 participants performed circular tracking movements under five levels of visual information delay using a modified monitor in a darkened room. Measured movement speeds and the manipulated delays were used with the model to estimate t_cr of individuals and test effects of gender and path width. The results showed excellent model fits and demonstrated individual differences of t_cr, which was 273 ms on average and ranged from 87 to 441 ms. The wide range of t_cr values was due to significant effects of gender and path width. Male participants required shorter t_cr compared to female participants, especially for narrow path widths.