Molecular beam epitaxial growth of HgCdTe on CdZnTe(311)B

A series of n-type, indium-doped Hg_1−xCd_xTe (x∼0.225) layers were grown on Cd_0.96Zn_0.04Te(311)B substrates by molecular beam epitaxy (MBE). The Cd_0.96Zn_0.04Te(311)B substrates (2 cm × 3 cm) were prepared in this laboratory by the horizontal Bridgman method using double-zone-refined 6N source materials. The Hg_1−xCd_xTe(311)B epitaxial films were examined by optical microscopy, defect etching, and Hall measurements. Preliminary results indicate that the n-type Hg_1−xCd_xTe(311)B and Hg_1−xCd_xTe(211)B films (x ∼ 0.225) grown by MBE have comparable morphological, structural, and electrical quality, with the best 77 K Hall mobility being 112,000 cm²/V·sec at carrier concentration of 1.9×10⁺¹⁵ cm⁻³.     

Experimental study of thermal performance improvement of a solar air flat plate collector through the use of obstacles: application for the drying of ‘yellow onion’

In the solar air flat plate collector, the insufficiency of the thermal exchange between the fluid and the absorber obliges the user to enhance their optimization. This low thermal exchange does not allow these systems to obtain their best performance or the best thermal efficiency. In our experimental study, which consists of a solar energy simulation, we have sought to improve the efficiency–temperature rise couple of the flat plate solar collector by considering several types of obstacles disposed in rows in the dynamic air vein of the collector. Thus, we have proceeded to the application of the best two systems (WDL1 and TL) for drying an agricultural product (Yellow Onion). By comparing with the collector without obstacles (WO), the thermal transfers and, consequently, the output temperature (T_OC) and the collector efficiency (η) are clearly improved. The drying times obtained with the proposed systems are very interesting. The heat quantities obtained in the case of WDL1 are very important compared with the collector WO. However, the entry to the drying cupboard of this high temperature (T_OC) in the vicinity of the solar midday must be limited to the maximal value demanded by the considered product. Copyright © 1999 John Wiley & Sons, Ltd.     

TBHP-Mediated Intermolecular Radical Coupling and Intramolecular Cyclization Cascade: Access to Furo[2,3-b]quinoxalines and Their Photophysical Study

A cascade one-pot strategy to construct 31 examples of furo-fused quinoxalines in up to 88% yields has been devised from readily accessible β-ketothioamides and quinoxalin-2-ones in open flask at room temperature under TBHP mediated conditions. Mechanistic studies revealed that the overall reactivity relies on the seamless integration of intermolecular radical coupling and intramolecular cyclization via desulfhydration of C=S bond cleavage. Generation of H₂S as the only by-product makes this process highly attractive. Furthermore, the photophysical behavior of the furo-fused quinoxalines has also been studied.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.     

The effect of bismaleimide resin on curing kinetics of epoxy–amine thermosets

An analysis of the cure kinetics of several formulations composed of diglycidyl ether of bisphenol-A (DGEBPA) and aromatic diamines, methylenedianiline (MDA) and diaminodiphenyl sulfone (DDS), in the absence and presence of 4,4′-bismaleimidodiphenylmethane (BM) was performed. The dynamic differential scanning calorimetry (DSC) thermograms were analyzed with the help of ASTM kinetic software to determine the kinetic parameters of the curing reactions, including the activation energy, preexponential factor, rate constant, and 60 min ½ life temperature. The effects of substitution of one curing agent for another, their concentration, and the absence and presence of BM resin and its concentration on curing behavior, ethalpy, and kinetic parameters are discussed. © 1996 John Wiley & Sons, Inc.     

Chitosan/calcium–alginate beads for oral delivery of insulin

A mild chitosan/calcium alginate microencapsulation process, as applied to encapsulation of biological macromolecules such as albumin and insulin, was investigated. The microcapsules were derived by adding dropwise a protein-containing sodium alginate mixture into a chitosan–CaCl₂ system. The beads containing a high concentration of entrapped bovine serum albumin (BSA) as more than 70% of the initial concentration were achieved via varying chitosan coat. It was observed that approximately 70% of the content is being released into Tris-HCl buffer, pH 7.4 within 24 h and no significant release of BSA was observed during treatment with 0.1M HCl pH 1.2 for 4 h. But the acid-treated beads had released almost all the entrapped protein into Tris-HCl pH 7.4 media within 24 h. Instead of BSA, the insulin preload was found to be very low in the chitosan/calcium alginate system; the release characteristics were similar to that of BSA. From scanning electron microscopic studies, it appears that the chitosan modifies the alginate microspheres and subsequently the protein loading. The results indicate the possibility of modifying the formulation in order to obtain the desired controlled release of bioactive peptides (insulin), for a convenient gastrointestinal tract delivery system. © 1996 John Wiley & Sons, Inc.     

Analysis of slitless holographic spectrometers implemented by spherical beam volume holograms

The analysis of a slitless volume holographic spectrometer is presented in detail. The spectrometer is based on a spherical beam volume hologram followed by a Fourier-transforming lens and a CCD. It is shown that the spectrometer is not sensitive to the incident angle of the input beam for the practical range of applications. A holographic spectrometer based on the conventional implementation is also analyzed, and the results are used to compare the performance of the proposed method with the conventional one. The experimental results are consistent with the theoretical study. It is also shown that the slitless volume holographic spectrometer lumps three elements (the entrance slit, the collimator, and the diffractive element) of the conventional spectrometer into one spherical beam volume hologram. Based on the unique features of the slitless volume holographic spectrometer, we believe it is a good candidate for portable spectroscopy for environmental and biological applications.     

Simple online recognition of optical data strings based on conservative optical logic

Optical packet switching relies on the ability of a system to recognize header information on an optical signal. Unless the headers are very short with large Hamming distances, optical correlation fails and optical logic becomes attractive because it can handle long headers with Hamming distances as low as 1. Unfortunately, the only optical logic gates fast enough to keep up with current communication speeds involve semiconductor optical amplifiers and do not lend themselves to the incorporation of large numbers of elements for header recognition and would consume a lot of power as well. The ideal system would operate at any bandwidth with no power consumption. We describe how to design and build such a system by using passive optical logic. This too leads to practical problems that we discuss. We show theoretically various ways to use optical interferometric logic for reliable recognition of long data streams such as headers in optical communication. In addition, we demonstrate one particularly simple experimental approach using interferometric coinc gates.