Investigation on the Recrystallization Behaviour of Cold Deformed MP159 Alloy

The recrystallization behaviour of cold drawn MP159 alloy was investigated by optical and TEM examinations. It is found that the platelet ε phase in the MP alloy inhibits the recrystallization,and this effect makes the MP159 alloy with high recrystallization temperature of about 920℃.This inhibition mainly comes from the increasing of the interfacial energy, which results from the change of the coherent interfaces of (0001)hcp//(111)fcc into the incoherent interfaces when the recrystallizing grain fronts bypass the platelet ε martensite. The increasing of the interfacial energy also causes the dissolution of a few segments on the ε martensite platelets, which decreases the strength of the MP alloy     

Representation and reconstruction of polygons and polyhedra using Hierarchical Extended Gaussian Images

In this paper, two new representation schemes called the Branched Gaussian Image (BGI) and the Hierarchical Extended Gaussian Image (HEGI) are proposed. They can be used for uniquely representing both concave and convex, two-dimensional figures and three-dimensional objects. The representation by the Branched Gaussian Image involves several Gaussian spheres connected by branches where the traversing directions might be different. Examples showing how the use of the BGI enables us to achieve the mapping and inverse mapping of concave polygons and polyhedra uniquely are presented. The Gaussian spheres in the BGI can be organized into a tree-like hierarchical structure known as the Hierarchical Extended Gaussian Image. A general procedure for mapping a polygon or polyhedron to its HEGI representation is described. An approach for reconstructing concave polygons from Branched Gaussian Images is presented. The reconstruction of a concave polyhedron from its Hierarchical Extended Gaussian Images by using an iterative method or a closed-form method for each convex component is also described.     

含油废水处理

在水量水质调查的基础上，本文提出了以出水回用为目的的含油废水隔油调节沉淀－混凝沉淀－砂滤处理工艺，动态模型试验表明，废水中油和ＣＯＤ的去除率分别达到９５％和９０％，出水浊度低于２，此水质完全可回用于有关生产车间。     

在高速气流粉碎作用下PVC的力化学降解及形态变化的研究

通过ＧＰＴ、ＦＴ－ＩＲ、ＳＥＭ和力学性能测试，研究了在高速气流作用下聚氯乙烯（ＰＶＣ）的力化学降解反应、颗粒形态和微晶结构变化及其对ＰＶＣ物理、力学性能的影响。实验结果表明，经过高速气流处理ＰＶＣ，分子量将有所降低，晶体结构发生变化，颗粒尺寸和表观密度降低，比表面积增大，加工性能和力学性能得到明显改善。     

真空微电子三极管几何参数的设计考虑

真空微电子三极管是近年来兴起与发展的真空微电子学中的一类重要器件。本文从真空微三极管的工作特性出发,分析了这类器件中所需考虑的几何参数和工作特性的关系,并给出了一些理论和实验公式,为今后的设计提供一些参考。     

三脉冲不等强度激光片光源的研制及应用

本文报道了最近研制成功三脉冲不等强度调Q红宝石激光片光源系统.利用小颗粒对片光源90°方向的散射光对动态颗粒场进行高速摄影,从底片中能够精确直观地判断微小颗粒的瞬时分布、运动方向、速度和加速度情况.     

氯丁橡胶的溶液接枝反应研究

本文研究了引发剂过氧化苯甲酰的用量对ＣＲ接技ＭＭＡ－ＡＡ反应的单体转化率、接枝率及接枝胶的粘度、剥离强度等的影响，并用红外光谱和元素和元素分析对反应产物进行了表征．结果表明，体系中存在接枝、降解、交联三种反应，在不同的配方和工艺条件下，三种反应的反应程度不同．     

SiCf/O′-SiAlON composite: properties and oxidation retained properties

A composite of O′SiAlON (Si_2-xAl_xN_2-xO_1+x, with x 0.14) reinforced with 20 vol.% SiC monofilaments was fabricated by hot-pressing, at 1600°C, for 2 h under 34 MPa pressure. The mechanical and interfacial properties of the composites, as-fabricated as well as post-oxidized, were, investigated. The composite exhibited a significant improvement in ultimate flexure strength (640 MPa) and work of fracture (42 kJ m⁻²) compared with that (350 MPa and 1.8 kJ m⁻², respectively) of the monolithic material. These mechanical properties were slightly increased after the composite was heat treated for 24 h in air at 1200 and 1300°C. However, the composite exhibited a significant degradation in ultimate strength, while the work of fracture (WOF) remained unchanged after exposure in air at temperatures beyond 1400°C. The as-fabricated composite revealed a low interfacial shear strength (6.2 MPa) and a frictional sliding stress (3.2 MPa). After the composite was oxidized at elevated temperatures, the interfacial bonding and sliding stresses were reduced to noticeable extents, resulting from the degradation of the carbon coating layer of the SiC monofilaments.     

IBM—PC系列机中的定时功能

本文介绍 IBM-PC 系列机中的定时信息。进而介绍利用这些信息实现各类长、短定时间隔的编程技巧,并以实例说明之。