5—烃基—2,3—二甲基吡嗪的合成

2,3-二基-5,6-二氢吡嗪与醛或酮在氢氧化钠的乙醇溶液中反应制得16种5-烃基-2,3-二甲基吡嗪。产率66%～90%。其中6种为新合成的化合物。产率17%～87.9%。     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

Studies on the semirigid chain polyamide—poly(1,4-phenyleneterephthalamide)

In this article, the polycondensation of terephthaloyl chloride and p-phenylenediamine was systematically studied, including the liquid–crystalline state of the solution and the spinning of poly(1,4-phenyleneterephthalamide) (PPTA). High-molecular-weight PPTA with ε_inh = 5–7 was prepared and the main factors influencing the solution polycondensation of 1,4-phenylenediamine with terephthaloyl chloride were studied in detail. Experimental results showed that the water content of the reaction system, reactant concentration, and volume ratio of mix solvents have a great influence on the inherent viscosity of the poly(1,4-phenyleneterephthalamide) obtained. The highest ε_inh was obtained at 0.3M/liter reactant concentration in a mixed solvent ratio HMPA/DMAC of 4/1 (by volume), at 0.35M/liter reactant concentration in a mixed solvent of HMPA/NMP = 7/3, and at 0.5M/liter of reactant concentration in a mixed solvent of HMPA/THF = 9/1. The water content must be controlled to less than 100 ppm in the polymerization system. In the early stage of the polycondensation process, the ε_inh of the polymer obtained increased rapidly with time. The system gelled within 2 or 3 min, while the monomer conversion reached about 100%. However, the reaction of polycondensation continued after gelation and the ε_inh of the polymer increased appreciably. We have studied the viscosity behavior at 20–155°C for the anisotropic solution of PPTA in 100% sulfuric acid (ε_inh of PPTA 2.5–4.9). Experimental results showed that, at low concentrations the viscosity of isotropic solution increases with the increase of polymer concentration to reach a maxium near the critical polymer concentration, beyond which the solution changes to an anisotropic liquid–crystalline solution. The appropriate spinning region was obtained as shown in the phase diagram determined by viscosity, degree of depolarization anisotropy, and region of thermal depolymerization. Fibers of PPTA with high modulus and high tenacity were obtained by dry-jet wet spinning. The fibers obtained have a tenacity of ～22 g/denier, a modulus of ～600 g/denier, and elongation at break ～3.5%.     

高聚合度聚氯乙烯的加工性能

本文对高聚合度聚氯乙烯(H-PVC)的发展及其优异的物理机械性能作了简要介绍;着重分析了H-PVC的加工性能和表征方法,并讨论了分子特性和颗料特性及加工组成、加工条件对加工性能的影响,提出了改进H-PVC加工性能的方法。     

不饱和酸结构对不饱和聚酯树脂固化行为的影响

通过IR分析了用顺酐和反酸与聚酯合成不饱和聚酯树脂的反应机理,讨论了二种树脂体系固化放热曲线不同的原因。     

On the nature of the active state of silver during catalytic oxidation of methanol

Under the applied high reaction temperatures (900 K) the Ag surface is restructured and a tightly held oxygen species is formed on the surface (O) apart from O atoms dissolved in the bulk (O). Methanol oxidation to formaldehyde proceeds through this O species as demonstrated by application of a variety of spectroscopic techniques.     

注塑模微机CAD系统

本文介绍了一个微机上运行的注塑模ＣＡＤ系统，此系统主要解决了四个难点，浇注系统设计，冷却系统分析，型腔，型芯的曲面造型设计，装配图和零件工作图的设计绘制，经厂家实际运用证明，该系统使用方便，结果正确，能提高设计效率，降低生产成本。     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

D级压力容器制造许可证鉴定评审中企业存在问题综述

阐述了在D级压力容器制造许可证取换证鉴定评审过程中,取换证制造企业存在的较为普遍的问题。     

基于老年人情感需求的养老院康复景观设计

文章阐述了养老院中老年人的情感需求和行为方式,研究了景观和老年人的生活、健康、康复之间的关系。总结了使用康复景观设计为老年人创造满足其情感需求帮助他们缓解压力、安度晚年的空间场所的方法。