CacO3在PP和PP/mPE共混物基体中的作用比较

研究CaCO3填料在取丙烯（PP）和茂金属聚乙烯（mPE)弹性体增韧PP共混物（PP／mPE)2种基体中的不同作用。结果表明：在PP基体中，填料显著提高其刚性，而在共混物基体中，由于弹性体的存在，填料的增强作用减弱；弹性体能够改善填料粒子和基体的界面粘合，增大弹性体分散相的尺寸，使PP/mPE共混物的拉伸断裂韧性提高。低温下（－30℃）的Charpy缺口冲击实验表明：少量的CaCO3即可导致PP/mPE体系冲击强度的迅速下降。     

水解酸化-SBR法处理生物制药废水

对采用水解酸化-SBR法处理生物制药废水的调试运行作了详细说明。工程实践表明，该工艺对处理有机物浓度高、水质水量波动大的生物制药废水是切实可行的，出水水质可达到国家污水综合排放标准一级标准．剩余污泥也得到有效处理处置。该工艺结构简单，操作简便，占地面积小，运行效果稳定，具有推广应用价值。     

16Mn钢在3％氯化钠水溶液中的阴极保护及其氢脆敏感性

本文用失重法和慢应变率法确定16Mn钢在3％氯化钠水溶液中适宜阴极保护电位区间,用扫描电镜观察慢应变拉伸断口形貌。结果表明:16Mn钢在3％氯化钠水溶液中适宜阴极保护电位区间是:-775mVSCE——-900mVSCE。阴极过保护电位下,16Mn钢将发生以沿晶脆断为特征的氢脆,而且保护电位越负,其氢脆敏感性越大。     

氨纶干法纺丝介质循环系统的设备和工艺介绍

介绍氨纶干法纺丝技术中纺丝介质 (SM )循环系统的主要设备 ,对循环风压力、风温度和风量控制进行了探讨。严格控制SM循环工艺参数 ,可减少并丝现象。     

A comprehensive assessment of supported titania photocatalysts in a fluidized bed photoreactor: Photocatalytic activity and adherence stability

Titania (TiO₂) was immobilized onto hydroxylated glass beads (HGB) via the thermal bonding and sol–gel coating methods. The photocatalytic activity and adherence stability of the prepared supported photocatalysts were studied in a fluidized bed photoreactor. P25 thermally bonded HGB was found to be more active than sol–gel coated HGB prepared with the same immobilization conditions, while both of them exhibited poor adherence stability, i.e., large amounts of immobilized TiO₂ detached from HGB during the degradation. The adherence stability was improved with limited extents by increasing the calcination temperature or reducing the coverage of TiO₂ on HGB, but either of these approaches resulted in lower activity. The poor adherence stability was ascribed to the fluid shear force and particle friction in fluidized bed, as well as the insufficient bonding between TiO₂ and HGB in terms of the bonding mechanism.

Hydroxylated quartz sands (HQS) and silica gel beads (SGB) were further studied and used as supports. Results have shown that the adherence stability was significantly improved with SGB but only slightly improved with HQS. Characterizations results showed that a coarser surface and more surface Si–OH groups could improve the adherence stability of supported TiO₂ photocatalysts.     

印刷胶带生产中的几个问题

对印刷胶带生产中的几个问题如稀释剂、印刷中参数、涂布工艺等作了简述。     

新试剂2－（6－甲基－2－苯并噻唑偶氮）－5－二乙氨基酚分光光度法测定微量镍

本文报道用新试剂２－（６－甲基－２－苯并噻唑偶氮）－５－二乙氨基酚（ＭＢＴＡＥ）分光光度法测定微量镍。Ｎｉ：ＭＢＴＡＥ＝１：２，ε＝８．１×１０４Ｌ／ｍｏｌ·ｃｍ，Ｎｉ２＋浓度在０～２２μｇ／２５ｍＬ范围内服从比尔定律。用于金属有机化合物中微量镍的测定，结果与理论值相符。     

塑料管材用于干式地板供热、供冷的可行性研究

据塑料管材的力学性能，针对其应用于地板供热、供冷时应注意的问题，从塑料管材使用条件、管材的选择、管壁厚度的确定、地板结构、介质作用温度及供热、供冷运行方式等方面对塑料管材应用于供热、供冷的可行性进行了探讨，提出了一些相应措施和技术方案，并给出了实例。     

缩合型室温硫化硅橡胶耐热性的研究进展

从硅橡胶的分子结构分析了其耐热性优于普通橡胶的原因及热老化机理，并比较了几种硫化体系的缩合型室温硫化硅橡胶的耐热性，着重介绍了国内外提高室温硫化硅橡胶耐热性的方法和研究进展。     

Program verification and testing technologies

Program verification and testing techniques are crucial in fruitfully analyzing and validating complex software systems. This is an active research area and has produced various promising techniques in the last decade. However, many challenges lie ahead. We review the research area and summarize six papers selected from the Sixth International Symposium on Theoretical Aspects of Software Engineering (TASE 2012).