Discovering Homophily in Online Social Networks

Mobile Networks and Applications - During the last ten years, Online Social Networks (OSNs) have increased their popularity by becoming part of the real life of users. Despite their tremendous...     

Comparative study of drift region designs in RF LDMOSFETs

Systematic investigation of the drift region design of the RF LDMOSFET in terms of breakdown voltage, on-resistance, transconductance, capacitance and hot-carrier effects is presented. The incorporation of a source field plate allows for an increase of drift dose for a given breakdown voltage, which eases the tradeoff between the breakdown voltage and on-resistance, and the breakdown voltage and transconductance. However, the increased dose can significantly degrade hot-carrier reliability. A step-drift has enhanced hot-carrier immunity and lower capacitance, but, at the cost of increased on-state resistance and lower transconductance. Furthermore, a second origin of hot carriers is reported in the step-drift design, which may cause damage in the drift region. A deeper drift region design, which does not require an additional mask in comparison to the step-drift design, is investigated. The proposed approach shares all the advantages provided by the field plate design. Moreover, the lower concentration in the new drift region design leads to enhanced hot-carrier immunity.     

Proliferative characteristics of epithelial cells in the pregnant rat uterus

In the pregnant rat, killed at about mid gestation and 1 h after injection of tritiated thymidine, 40% of the cells in the epithelium lining the uterine lumen at the implantation site were labelled. Between implantation sites fewer than 20% of the surface epithelial cells were labelled. A series of rats was given tritiated thymidine on day 12 of pregnancy and killed at intervals in the next 30 h. A percentage labelled mitoses analysis of the epithelium between implantation sites (interconceptual) and within the implantation site (conceptual) showed that cells in either region spent 7 h in DNA synthesis and 1.5 h in the G₂ + ½ mitosis phases. The epithelial cells in the conceptual region spent 1.5 h in the G₁ + ½ mitosis phases whereas cells in interconceptual regions spent at least 11.5 h in these phases. The average cycle times of cells in conceptual regions was 10 h: in interconceptual regions minimum cycle time was 20 h and the average appeared to be considerably longer. The grain count of the epithelial cells in the conceptual region was rapidly reduced during the 30 h after injection of tritiated thymidine suggesting successive rounds of cell division. In contrast the grain count distribution of cells in interconceptual regions changed only slowly during this time. The percentage of labelled epithelial cells was determined in the animals killed up to 30 h after injection of tritiated thymidine. In both conceptual and interconceptual regions these percentages increased initially as labelled cells produced labelled progeny. In the conceptual region the increase was not maintained after 7 h as cells initially in G₁ divided to give unlabelled progeny. In the interconceptual region the increase in the percentage of labelled cells continued for 14 h; thereafter the percentage did not significantly alter. The interpretation of these results is discussed in relation to the differences in the kinetic characteristics of the epithelial cells in the two regions and in relation to the morphology of the epithelium lining the uterus during pregnancy.     

Dispersion characteristics of asymmetric coupled anisotropic dielectric waveguides using FDFD

The formulation is developed in the frequency domain and the finite difference method is used for the numerical solution of the scalar wave equation, written in terms of the transverse components of the magnetic field. As a result a conventional eigenvalue problem is obtained without the presence of spurious modes due to the implicit inclusion of the divergence of the magnetic field equal to zero. The formulation is developed to include biaxial anisotropic dielectrics with an index profile varying arbitrarily in the cross section of the waveguide under analysis. This formulation is then applied to the analysis of the influence on the dispersion characteristics of the dimensions of asymmetric coupled rectangular uniaxial anisotropic dielectric waveguides. As expected, the reduction of the height or the width of one of the rectangular dielectric waveguides causes the dispersion curves to move towards higher frequencies.     

Muscle composition and fatty acid profile in lambs fattened in drylot or pasture

The effects of two fattening systems on muscle composition and fatty acid profile were determined in an experiment using samples of the longissimus dorsi (LD) muscle of 24 ram lambs (slaughter weight 29–31 kg). The fattening systems were: (i) drylot (a mixture of maize, soybean, wheat and minerals) and (ii) grazing (Cynodon dactylon). The lambs fattened in the drylot system presented higher fat levels (p<0.01), but lower concentrations of moisture (p<0.01) and cholesterol (p<0.05). The lipid content presented a negative correlation with moisture and protein. In lambs fattened in the drylot system increasing levels of fatness of LD muscle were associated with a decrease (p<0.05) in myristic and palmitic acids, but myristic, palmitic and linoleic acids increased (p<0.05) as the cholesterol levels of the muscles increased.     

Discriminators for Instantaneous Frequency Measurement Subsystem Based on Open-Loop Resonators

The authors have studied a new way to design an instantaneous frequency measurement subsystem (IFMS). The method is based on bandstop filters. The device uses rectangular open-loop resonators instead of delay lines. The resonance frequency is adjusted by a resonator perimeter that must be approximately a half-wavelength long, and also by coupling distance between the resonators and the main transmission line. Simulated and experimental results are presented for a 5-bit IFMS.     

Mean on the Screen: Social Aggression in Programs Popular With Children

A content analysis was conducted to examine the portrayal of social aggression in the 50 most popular television programs among 2‐ to 11‐year‐old children. Results revealed that 92% of the programs in the sample contained some social aggression. On average, there were 14 different incidents of social aggression per hour in these shows, or one every 4 minutes. Compared to the portrayals of physical aggression, social aggression was more likely to be enacted by an attractive perpetrator, to be featured in a humorous context, and neither rewarded or punished. In these ways, social aggression on television poses more of a risk for imitation and learning than do portrayals of physical aggression. Findings are discussed in terms of social cognitive theory.     

Nonequilibrium Operation of Arsenic Diffused Long-Wavelength Infrared HgCdTe Photodiodes

We demonstrated a device with a unique planar architecture using a novel approach for obtaining low arsenic doping concentrations in long-wavelength (LW) HgCdTe on CdZnTe substrates. HgCdTe materials were grown by molecular beam epitaxy (MBE). We fabricated a p-on-n structure that we term P ⁺/π/N ⁺ where the symbol “π” is to indicate a drastically reduced extrinsic p-type carrier concentration (on the order of mid 10¹⁵ cm⁻³); P ⁺ and N ⁺ denote a higher doping density, as well as a higher energy gap, than the photosensitive base π-region. Fabricated devices indicated that Auger suppression is seen in the P ⁺/π/N ⁺ architecture at temperatures above 130 K and we obtained a saturation current on the order of 3 mA on 250-μm-diameter devices at 300 K with Auger suppression. Data shows that about a 50% reduction in dark current is achieved at 300 K due to Auger suppression. The onset of Auger suppression voltage is 450 mV at 300 K and 100 mV at 130 K. Results indicate that a reduction of the series resistance could reduce this further. A principal challenge was to obtain low p-type doping levels in the π-region. This issue was overcome using a novel deep diffusion process, thereby demonstrating successfully low-doped p-type HgCdTe in MBE-grown material. Near-classical spectral responses were obtained at 250 K and at 100 K with cut-off wavelengths of 7.4 μm and 10.4 μm, respectively. At 100 K, the measured non-antireflection-coated quantum efficiency was 0.57 at 0.1 V under backside illumination. Received November 7, 2007; accepted March 19, 2008     

Finite-element modeling of bones from CT data: sensitivity to geometry and material uncertainties

The aim of this paper is to analyze how the uncertainties in modelling the geometry and the material properties of a human bone affect the predictions of a finite-element model derived from computed tomography (CT) data. A sensitivity analysis, based on a Monte Carlo method, was performed using three femur models generated from in vivo CT datasets, each subjected to two different loading conditions. The geometry, the density and the mechanical properties of the bone tissue were considered as random input variables. Finite-element results typically used in biomechanics research were considered as statistical output variables, and their sensitivity to the inputs variability assessed. The results showed that it is not possible to define a priori the influence of the errors related to the geometry definition process and to the material assignment process on the finite-element analysis results. The errors in the geometric representation of the bone are always the dominant variables for the stresses, as was expected. However, for all the variables, the results seemed to be dependent on the loading condition and to vary from subject to subject. The most interesting result is, however, that using the proposed method to build a finite-element model of a femur from a CT dataset of the quality typically achievable in the clinical practice, the coefficients of variation of the output variables never exceed the 9%. The presented method is hence robust enough to be used for investigating the mechanical behavior of bones with subject-specific finite-element models derived from CT data taken in vivo.     

A framework for network quality monitoring in the VoIP environment

Monitoring speech quality in Voice over IP (VoIP) networks is important to ensure a minimal acceptable level of speech quality for IP calls running through a managed network. Information such as packet loss, codec type, jitter, end‐to‐end delay and overall speech quality enables the network manager to verify and accurately tune parameters in order to adjust network problems. The present article proposes the deployment of a monitoring architecture that collects, stores and displays speech quality information about concluded voice calls. This architecture is based on our proposed MIB (Management Information Base) VOIPQOS, deployed for speech quality monitoring purposes. Currently, the architecture is totally implemented, but under adjustment and validation tests. In the future, the VOIPQOS MIB can be expanded to automatically analyze collected data and control VoIP clients and network parameters for tuning the overall speech quality of ongoing calls. Copyright © 2006 John Wiley & Sons, Ltd.