Nanocrystalline (Y0.7Gd0.3)2O3 powder, synthetised via polymer complex solution method, was compacted into 25 pellets applying high pressures (173-867 MPa) for 30 s that were subsequently sintered at different temperatures (800-1400 °C) for 18 h. The morphology and optical characteristics of the starting powder and prepared ceramic samples were monitored and discussed in order to identify the changes induced with the variations of initial compacting pressure, which influence is often neglected, and with sintering temperature. The grain size tends to decrease significantly with increasing pressure, even when elevated temperatures are used for annealing, while low compacting pressure resulted in grain coarsening and, in some cases, even in anomalous morphology of ceramic samples. Luminescence emission in ceramic samples decays faster than in nanopowders, that is in complete agreement with the grain formation and gradual transformation to the bulk material. Judd-Ofelt intensity parameters and branching ratios were calculated taking into account the difference in effective refractive index for nanopowder and ceramic samples. 相似文献
Rapid and specific detection of Cronobacter spp. in powdered infant formula milk (IFM) is of great importance for health and safety reasons. In the present study, two rapid and specific methods, the immunochromatographic strip (ICT) and the matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS), were tested for the detection of Cronobacter spp. in IFM. IFM samples spiked by Cronobacter spp. were correctly detected as positive by both methods. These results were verified by the classical cultivation microbiological method (ISO/TS 22964:2006). All three methods were used for the analyses of 13 IMF samples from a local market with identical results. Only one IFM sample was found to be positive. Both tested methods considerably reduced the total detection time, to 24?h (ICT) and 46?h (MALDI-TOF MS), whereas the reference ISO/TS 22964:2006 method needs 140?h. 相似文献
Although manure is an important source of minerals and organic compounds it represents a certain risk of spreading the veterinary drugs in the farmland and their permeation to human food. We tested the uptake of the anthelmintic drug fenbendazole (FBZ) by soybean, a common crop plant, from the soil and its biotransformation and accumulation in different soybean organs, including beans. Soybeans were cultivated in vitro or grown in a greenhouse in pots. FBZ was extensively metabolized in roots of in vitro seedlings, where sixteen metabolites were identified, and less in leaves, where only two metabolites were found. The soybeans in greenhouse absorbed FBZ by roots and translocated it to the leaves, pods, and beans. In roots, leaves, and pods two metabolites were identified. In beans, FBZ and one metabolite was found. FBZ exposure did not affect the plant fitness or yield, but reduced activities of some antioxidant enzymes and isoflavonoids content in the beans. In conclusion, manure or biosolids containing FBZ and its metabolites represent a significant risk of these pharmaceuticals entering food consumed by humans or animal feed. In addition, the presence of these drugs in plants can affect plant metabolism, including the production of isoflavonoids. 相似文献
Understanding pathophysiology and identifying mothers at risk of major pregnancy complications is vital to effective prevention and optimal management. However, in current antenatal care, understanding of pathophysiology of complications is limited. In gestational diabetes mellitus (GDM), risk prediction is mostly based on maternal history and clinical risk factors and may not optimally identify high risk pregnancies. Hence, universal screening is widely recommended. Here, we will explore the literature on GDM and biomarkers including inflammatory markers, adipokines, endothelial function and lipids to advance understanding of pathophysiology and explore risk prediction, with a goal to guide prevention and treatment of GDM. 相似文献
Main focus of this study was on characterization of surface properties of virgin and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) phospholipid layer coated poly(ethylene terephthalate) (PET) and polycarbonate (PC) planar articles. Surface properties were followed measuring static contact angles of wetting by means of sessile drop method and deposition of negative polystyrene (PS) colloidal particles followed by impinging jet method at defined flow regimes. It was found that phospholipid coating of both studied samples (PET, PC) let to the vigorous increase of the surface free energy. For coated samples major part of the surface free energy was dominated by polar component in contrast to the non-treated materials. Here the dispersive component was dominating. Results of the deposition experiments of polystyrene particles of 3 μm diameter correspond with trends obtained by contact angle measurements, i.e. the surface treated materials exhibited higher surface activity reflected in increased particle deposition rates. Simultaneously there was confirmed the fact, that with increasing magnitude of the Reynolds number of the dispersion flux the higher deposition rates were observed. 相似文献
A strong difference in the physico-chemical properties of the plastic lubricants studied was found in this study through pressure drop, thermal analysis, vibration damping, texture hardness and rheological measurements. Oxidation aging of the lubricant sample containing rapeseed oil additive was proposed. Its higher thermal sensitivity was simultaneously confirmed by frequency dependent complex shear modulus of elasticity measurements as well as by rheological testing. Rapeseed oil modified lubricant showed a higher decrease in both storage and moduli losses due to a temperature increase from 16 to 26 ° C compared to the rapeseed oil free sample. Simultaneously, the flow curves were shifted to the higher shear stresses (for plastic lubricant without rapeseed oil additive) typical for rheopectic fluids. For the rapeseed oil modified lubricant, the flow curves were shifted to the lower shear stresses, indicating its thixotropic fluid behaviour. The synthetic lubricant without rapeseed oil additive exhibited higher dissipative rheological behaviour as reflected by decreasing first resonance frequency peak position compared to the rapeseed oil modified lubricant as obtained from vibration damping measurements. It was found that the synthetic lubricant exhibited better vibration damping properties and mechanical energy dissipation into heat due to its higher viscous friction than the rapeseed oil modified lubricant under experimental conditions.
The ability to form an efficient interface between material and neural cells is a crucial aspect for construction of neuroelectrodes. Diamond offers material characteristics that could, to a large extent, improve the performance of neuroelectrodes. The greatest advantage of diamond is a large variety of material and surface properties such as electrical conductivity, surface morphology, and surface chemistry. Such a variety of material characteristics can lead to various cellular responses. Here, the authors compare survival, adhesion, and neurite formation of primary neurons on diamond thin films of various morphologies and treatments with several types of polymers commonly used to enhance cell adhesion. The authors find that the variation of surface roughness of nanocrystalline diamond film when coated with polymer does not have a major influence on neuron survival or adhesion. The adhesion of neurons can be influenced by the selected type of polymer coating. High molecular weight of polyethylenimine results in lower viability, adhesion, and neurite formation. The addition of laminin to treated films do not lead to significant improvements in neuron adhesion and neurite development. Their findings emphasize the importance of the correct polymer treatment over morphological properties of diamond thin films as a material for forming interfaces with primary neurons. 相似文献