The response of the adult and ATD heads to impacts onto a rigid surface

Given the high incidence of TBI, head injury has been studied extensively using both cadavers and anthropomorphic test devices (ATDs). However, few studies have benchmarked the response of ATD heads against human data. Hence, the objective of this study is to investigate the response of adult and ATD heads in impact, and to compare adult Hybrid III head responses to the adult head responses.     

pH control for enhanced reductive bioremediation of chlorinated solvent source zones

Enhanced reductive dehalogenation is an attractive treatment technology for in situ remediation of chlorinated solvent DNAPL source areas. Reductive dehalogenation is an acid-forming process with hydrochloric acid and also organic acids from fermentation of the electron donors typically building up in the source zone during remediation. This can lead to groundwater acidification thereby inhibiting the activity of dehalogenating microorganisms. Where the soils' natural buffering capacity is likely to be exceeded, the addition of an external source of alkalinity is needed to ensure sustained dehalogenation. To assist in the design of bioremediation systems, an abiotic geochemical model was developed to provide insight into the processes influencing the groundwater acidity as dehalogenation proceeds, and to predict the amount of bicarbonate required to maintain the pH at a suitable level for dehalogenating bacteria (i.e., > 6.5). The model accounts for the amount of chlorinated solvent degraded, site water chemistry, electron donor, alternative terminal electron-accepting processes, gas release and soil mineralogy. While calcite and iron oxides were shown to be the key minerals influencing the soil's buffering capacity, for the extensive dehalogenation likely to occur in a DNAPL source zone, significant bicarbonate addition may be necessary even in soils that are naturally well buffered. Results indicated that the bicarbonate requirement strongly depends on the electron donor used and availability of competing electron acceptors (e.g., sulfate, iron (III)). Based on understanding gained from this model, a simplified model was developed for calculating a preliminary design estimate of the bicarbonate addition required to control the pH for user-specified operating conditions.     

Hydrogenation of dinitriles on Raney-type Ni catalysts: kinetic and mechanistic aspects

The mechanism of the hydrogenation of aliphatic C₄–C₆ dinitriles (succinonitrile, glutaronitrile, and adiponitrile) over Raney-type Ni catalysts was investigated in a fed-batch autoclave at 350 K and 5.0 MPa. The results are interpreted based on the strength of adsorption, the interaction with the solvent and intramolecular interactions. The kinetics of the hydrogenation of aliphatic dinitriles is highly dependent on the hydrocarbon chain length. Short dinitriles like succinonitrile adsorb stronger on the catalyst surface than longer dinitriles like adiponitrile. The yield of the intermediate aminonitriles decreases with increasing hydrocarbon chain length, due to the enhanced competitiveness of dinitrile and aminonitrile for the same active sites. It is proposed that the reactivity of dinitriles and aminonitriles is caused by difference in solvent interaction. It is remarkable that the stronger the adsorption, the higher the reactivity. The reactivity decreases in the order: succinonitrile > glutaronitrile > adiponitrile. In contrast, the reaction rate of the aminonitriles is fairly independent of the hydrocarbon chain length. The formation of undesired secondary amines in the form of cyclic compounds is under kinetic control and increases with decreasing chain length. It is found that adiponitrile can be very selectively hydrogenated to primary diamines. Promoting Raney-type Ni catalysts with traces of Mo, Cr or Fe enhances the performance in the hydrogenation of dinitriles. This gives the best opportunity for process improvement towards the desired primary amines.     

Low Loss,High NA Chalcogenide Glass Fibers for Broadband Mid‐Infrared Supercontinuum Generation

High‐purity Ge–As–Se and Ge–As–S chalcogenide glasses were prepared by modified physical and chemical purification techniques. Using the purified glasses, step‐index fibers with a small core (~5.5 μm) and large numerical aperture (~1.3) were fabricated. When a 13.5‐cm‐long fiber was pumped with 320 fs pulses at a repetition rate of 10.5 MHz at 4.1 μm, supercontinuum spanning from ~1.8 to ~9.8 μm with a dynamic range of ±10 dB and an average power of ~3 mW was generated.     

Flood Hazards

The phenomenon of virtual space is fundamental to the way human beings relate perceptually, behaviorally, and existentially to their world. Virtuality is the presence of what is not literally present, and it thus enables the immanence of building to be annealed to the past and future, analogous form, and hypothetical possibility. In sum, virtuality is synonymous with “architecture” proper, as opposed to building simple. Through the use of gesture, the non-present is made present and given a secret status ruled by a non-classical or “grotesque” order. The principle of our access to the virtual is based on the act of reading, where the movement from the actual to the virtual is simultaneously a spatial and a philosophical transformation. Reading is not simply the translation of phonetic or iconographic characters into their linguistic equivalents, but a restructuring of the space of appearance. The origins and evolution of this “space of reading” are characterized by a distinctive architecture, and the architecture of inhabitable spaces is conditioned by this distinctive architecture: the architecture of reading is the means of reading architecture.     

High Brightness 2.2–12 μm Mid‐Infrared Supercontinuum Generation in a Nontoxic Chalcogenide Step‐Index Fiber

An environment friendly nonlinear chalcogenide glass fiber with a Ge‐Sb‐Se core and a Ge‐Se cladding is fabricated for bright broadband mid‐infrared (MIR) supercontinuum (SC) generation. The fabricated Ge‐Sb‐Se/Ge‐Se fiber with a core diameter of 6 μm shows zero group velocity dispersion at ~4.2 μm and ~7.3 μm. By pumping the fiber with a length of 11 cm at 4.485 μm with 330 fs pulses, we achieve a SC covering the 2.2–12 μm spectral range and with an output average power of ~17 mW. This bright broadband SC source is promising for high‐resolution MIR spectroscopy.     

Properties of phyllosilicate-based porous ceramics shaped by conventional tape casting and freeze tape casting

Silicate ceramics were shaped using tape casting (TC) and freeze tape casting (FTC) processes from three clays labeled HCR, KORS, and KCR. These clays exhibited mass content of 77% halloysite–10 Å, 29% kaolinite, and 98% kaolinite minerals, respectively. After casting the slurries, the dried tapes were sintered at 1200°C. The microstructure changes were characterized before and after sintering using scanning electron microscopy. The apparent porosity of TC samples was lower (36–47 vol.%) compared to values obtained with FTC samples (67–79 vol.%). The latter samples exhibited a highly textured porosity, with micron-sized pores aligned perpendicular to the tape surfaces. Upon sintering, the porosity of TC samples tended to decrease conversely to the case of FTC samples. Such behavior seemed related to the simultaneous effect of organic additives and ice templating. Consequently, the FTC samples showed a relatively low mechanical strength of 3–7 MPa and thermal conductivity of .14– .22 W m⁻¹ K⁻¹. After sintering, the mullite crystallization contributed to strengthen the bulk materials, helping to compensate for the detrimental effect of porosity on the stress to rupture and on thermal conductivity values.     

Determination of total dietary fibre and available carbohydrates: A rapid integrated procedure that simulates in vivo digestion

The new definition of dietary fibre introduced by Codex Alimentarius in 2008 includes resistant starch and the option to include non‐digestible oligosaccharides. Implementation of this definition required new methodology. An integrated total dietary fibre method was evaluated and accepted by AOAC International and AACC International (AOAC Methods 2009.01 and 2011.25; AACC Method 32–45.01 and 32–50.01, and recently adopted by Codex Alimentarius as a Type I Method. However, in application of the method to a diverse range of food samples and particularly food ingredients, some limitations have been identified. One of the ongoing criticisms of this method was that the time of incubation with pancreatic α‐amylase/amyloglucosidase mixture was 16 h, whereas the time for food to transit through the human small intestine was likely to be approximately 4 h. In the current work, we use an incubation time of 4 h, and have evaluated incubation conditions that yield resistant starch and dietary values in line with ileostomy results within this time frame. Problems associated with production, hydrolysis and chromatography of various oligosaccharides have been addressed resulting in a more rapid procedure that is directly applicable to all foods and food ingredients currently available.