High temperature low cycle fatigue

Fatigue at high temperature is a complex phenomenon as it is influenced by a number of time-dependent processes which become important at elevated temperatures. These processes include creep, oxidation, phase instabilities and dynamic strain ageing (DSA), acting either independently or synergistically influence fatigue behaviour, often lowering the fatigue life. Current design approaches employ linear summation of fatigue and creep damage with suitable factors on permissible damage to take care of uncertainties in interaction between cyclic and time-dependent processes. It is, therefore, important to develop a deeper understanding of the processes that occur during high temperature fatigue so that realistic life predictions could be made. Results on the high temperature fatigue behaviour of austenitic stainless steels, ferritic steels and nickel base alloys are presented here. The important mechanisms of interaction of high temperature time-dependent processes with fatigue under various conditions are discussed in detail. Emphasis is placed on cyclic stress response, fatigue life, deformation substructure and fracture behaviour. This is followed by a review of important life prediction techniques under combined creep-fatigue loading conditions. Life prediction techniques considered here include linear damage summation, strain range partitioning, ductility exhaustion approach, frequency modified and frequency separation methods, techniques based on hysteresis energy and damage rate models, and methods based on crack-cavitation interation models.     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

Fluidised pellet bed bioreactor: a promising technology for onsite wastewater treatment and reuse.

A pilot-scale fluidised pellet bed (FPB) bioreactor, which combines chemical coagulation, biological degradation, particle pelletisation and separation in one unit, was applied for onsite wastewater treatment and reuse. As a result of rational use of inorganic coagulant and organic polymer and moderate mechanical agitation, spherical particles were generated in the upflow column and a well-fluidised bed was formed. With a continuous supply of dissolved oxygen through a recycling loop, an aerobic condition was kept in the bottom section of the FPB column. Under such conditions the pellets in the FPB column showed the following characteristics: (1) compact structure and high density; (2) rich in microorganisms; and (3) high MLSS and MLVSS concentrations. Therefore, the FPB bioreactor achieved more than 90% removal of SS, COD, BOD and TP from raw domestic wastewater within a total hydraulic retention time (HRT) of only about 30 minutes. It also showed nitrification and denitrification ability and the TN removal could be about 50% as the recycling ratio was increased to 1:1. The treated water quality is generally competitive with the secondary effluent from a conventional activated sludge process. With these advantages the FPB bioreactor is recommendable as a compact system for onsite wastewater treatment and reuse.     

Experience with the antibiotic resistance analysis and DNA fingerprinting in tracking faecal pollution at two lake beaches.

Posting or closing of swimming beaches because of faecal contamination is a widespread problem reported in many locations. In a risk-based approach to this problem, the risk to swimmers' health is assessed by field monitoring of indicator bacteria and the associated risks are managed by source controls and other remedial measures. In risk assessment, great advances have been made in recent years with the introduction of microbial source tracking (MST) techniques. Two such techniques, antibiotic resistance analysis and DNA fingerprinting, were applied in a study of causes of faecal contamination at two lake beaches in Toronto, Ontario. Both methods identified bird faeces as the dominant sources of E. coli. Coping with this type of pollution presents a major environmental challenge.     

Self-aligned diffusion technique for n-InP JFETs

A self-aligned diffusion process has been demonstrated in the fabrication of n-InP JFETs on semi-insulating InP. This process utilises the anisotropic and selective etching properties of InP/GaInAs materials. Using this technique, sub-micrometre gate lengths can be achieved even with conventional photolithography. Devices with trans-conductance of >35mS/mm, leakage current of < 10nA/mm and gate capacitance of <0.7pF/mm have been fabricated with a cutoff frequency of 7 GHz.     

卤化银探测器及其某些特性

文中简述了卤化银(主要是溴化银)单晶片的某些特性,氯化银单晶片与此大致相似。作为低温晶体探测器,对~(241)Am-α放射源,分辨率为17%。卤化银晶片是固体电解质,只有Ag离子对输出电信号有贡献,有显著的极化现象。在液氮槽内溴化银晶片的电导率在几个数量级内成为可控的,由在室温下外加偏置电压大小所引起的分解状态下的初始电流决定。     

Comportement thermique de differents types d'habitation soumis a un ensoleillement et à une température extérieure périodiques

This paper presents the response of different kinds of schematic dwellings under daily periodic variations of the solar flux and the external temperature. The influence of the parameters which are characteristic of coupled heat transfer is studied (thermal diffusion and heat storage in external and internal walls, heat loses or solar heat supply by windows or airing).Calculations show that for an idealised regulation: (i) The energetical consumption depends only on mean variations of external temperature and solar flux and does not depend on the insulation location. (ii) For a building with a regulated internal temperature, the thermal inertia for the internal walls does not play a role. (iii) For an unregulated building, the internal temperature variations depends of the insulation location. The best location is the external one. (iv) There is an optimal thickness of walls corresponding to the daily periodic variations.     

Industrial and spatial interdependency in modeling: An employment forecasting model for the counties in the San Francisco Bay Region

This paper discusses the structure and empirical estimation of the County Employment Forecasting System (CEFS), a system used to forecast employment for 32 sectors for each one of the nine counties of the San Francisco Bay Region. CEFS differs in several aspects from the majority of models which attempt to simulate employment change at the subregional level; it explicitly considers the relationships between sectors, it accounts for the interactions between counties, and can provide a set of county forecasts which are consistent with the overall regional projections.