Stability of Y-Ti-O nanoparticles during laser deposition of oxide dispersion strengthened steel powder

This study investigated the feasibility of a direct energy deposition process for fabrication of oxide dispersion strengthened steel cladding. The effect of the laser working power and scan speed on the microstructural stability of oxide nanoparticles in the deposition layer was examined. Y-Ti-O type oxide nanoparticles with a mean diameter of 45 nm were successfully dispersed by the laser deposition process. The laser working power significantly affected nanoparticle size and number density. A high laser power with a low scan speed seriously induced particle coarsening and agglomeration. Compared with bulk oxide dispersion strengthened steel, the hardness of the laser deposition layer was much lower because of a relatively coarse particle and grain size. Formation mechanism of nanoparticles during laser deposition was discussed.     

COMPARISON OF EXPERIMENTAL AND MODELLING STUDIES FOR THE MICROWAVE DRYING OF IRONBARK TIMBER

Temperature profiles through boards during the microwave-assisted drying of Australian Ironbark timber have been investigated in this work in order to explore evidence for timber degrade via “charring” at internal temperatures below those required for pyrolysis (Brooke et al., 1998). A previously published model (Turner and Jolly, 1990a) describing one-dimensional microwave power absorption, based on the solution of Maxwell's equations, has been reviewed and significant limitations identified and overcome. Improvements included the use of a linear-mixing approach for the dielectric constants, the incorporation of temperature and moisture dependencies for these dielectric properties and the inclusion of diffusion within an overall system model. A control-volume technique has been used for predicting both moisture and temperature distributions within the timber, with a second-order finite-difference method being used to solve Maxwell's equations. The final model showed     

THE ELECTRODEWATERING OF SEWAGE SLUDGES

Electrodewatering (EDW), the enhancement of conventional pressure filtration by an electric field, is an emerging technology with the potential to improve dewatering especially for difficult materials. CSIRO has many years of experience in EDW, ranging from bench scale tests to demonstration trials. A recent programme has investigated the applicability of EDW to aerobic wastewater treatment sludges which are particularly difficult to dewater using conventional equipment.

The bench scale filtration experiments produced cakes with solids contents of 35-46 wt% using EDW, compared with 24-30 wt% using pressure filtration alone. This paper : • describes how the dewatering results were achieved;

•identifies a relationship between moisture removal limits by EDW and the forms of water within the sludge;

•shows the results of preliminary attempts to mathematically model the EDW process     

Effects of Dam Removal on Tule Fall Chinook salmon Spawning Habitat in the White Salmon River,Washington

Condit Dam is one of the largest hydroelectric dams ever removed in the USA. Breached in a single explosive event in October 2011, hundreds‐of‐thousands of cubic metres of sediment washed down the White Salmon River onto spawning grounds of a threatened species, Columbia River tule fall Chinook salmon Oncorhynchus tshawytscha. We investigated over a 3‐year period (2010–2012) how dam breaching affected channel morphology, river hydraulics, sediment composition and tule fall Chinook salmon (hereafter ‘tule salmon’) spawning habitat in the lower 1.7 km of the White Salmon River (project area). As expected, dam breaching dramatically affected channel morphology and spawning habitat due to a large load of sediment released from Northwestern Lake. Forty‐two per cent of the project area that was previously covered in water was converted into islands or new shoreline, while a large pool near the mouth filled with sediments and a delta formed at the mouth. A two‐dimensional hydrodynamic model revealed that pool area decreased 68.7% in the project area, while glides and riffles increased 659% and 530%, respectively. A spatially explicit habitat model found the mean probability of spawning habitat increased 46.2% after dam breaching due to an increase in glides and riffles. Shifting channels and bank instability continue to negatively affect some spawning habitat as sediments continue to wash downstream from former Northwestern Lake, but 300 m of new spawning habitat (river kilometre 0.6 to 0.9) that formed immediately post‐breach has persisted into 2015. Less than 10% of tule salmon have spawned upstream of the former dam site to date, but the run sizes appear healthy and stable. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.     

Modeling the effects and uncertainties of contaminated sediment remediation scenarios in a Norwegian fjord by Markov chain Monte Carlo simulation

Multimedia environmental fate models are useful tools to investigate the long-term impacts of remediation measures designed to alleviate potential ecological and human health concerns in contaminated areas. Estimating and communicating the uncertainties associated with the model simulations is a critical task for demonstrating the transparency and reliability of the results. The Extended Fourier Amplitude Sensitivity Test(Extended FAST) method for sensitivity analysis and Bayesian Markov chain Monte Carlo (MCMC) method for uncertainty analysis and model calibration have several advantages over methods typically applied for multimedia environmental fate models. Most importantly, the simulation results and their uncertainties can be anchored to the available observations and their uncertainties. We apply these techniques for simulating the historical fate of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the Grenland fjords, Norway, and for predicting the effects of different contaminated sediment remediation (capping) scenarios on the future levels of PCDD/Fs in cod and crab therein. The remediation scenario simulations show that a significant remediation effect can first be seen when significant portions of the contaminated sediment areas are cleaned up, and that increase in capping area leads to both earlier achievement of good fjord status and narrower uncertainty in the predicted timing for this.     

Harmonic Reduction in Synchronous Chopper-Converter Combinations

The synchronous chopper-converter combination has previously been shown to be suitable for moderate to high power ac/dc converter applications. Operation at unity displacement factor, however, was seen to be accompanied by a significant increase in the harmonic compensation requirements. Techniques for reducing the input harmonic current levels in the synchronous chopper-converter combination are investigated. Operating the synchronous chopper at higher frequencies allows selective harmonic elimination but results in restricted output voltage control. The use of a multiphase synchronous chopper yields greatly improved input characteristics but requires additional power components. A compromise solution involves a single-phase chopper operated at different frequencies over its operating range.     

A single regrowth integration platform for photonic circuits incorporating tunable SGDBR lasers and quantum-well EAMs

A monolithic integration platform is demonstrated for high functionality photonic circuits that include quantum-well electroabsorption modulators, semiconductor optical amplifiers, and widely tunable lasers. The platform is based on the selective removal of a set of active quantum wells located above an optical waveguide layer. The waveguide layer contains a second set of quantum wells to be used in modulator regions. Fabrication requires only a single blanket InP regrowth.     

Child pedestrian safety: Parental supervision, modeling behaviors, and beliefs about child pedestrian competence

Pedestrian injuries are a significant health risk to children, particularly those 5–9 years of age. Surprisingly, few studies have explored parent-related factors that may moderate this risk. The present study used naturalistic observations of parent–child pairs crossing at uncontrolled intersections and a short interview to examine parental supervision of children during crossings, modeling of safe-crossing behaviors, beliefs about how children come to cross streets safely, and whether child attributes (age, sex) relate to parental practices and beliefs. Results revealed that parents more closely supervised younger than older children, they modeled safer crossing practices for sons more than daughters, particularly younger sons, and although over half the sample believed children need to be explicitly taught how to cross safely, few actually provided any instruction when crossing with their children. Providing parents both with guidelines for how to accurately appraise their child's readiness for crossing independently and with information about best practices for teaching children how to cross safely may facilitate parents’ implementing these practices, particularly if this is coupled with public advocacy highlighting the important role they could play to reduce the risk of child pedestrian injury.     

各种引气剂以及抑泡剂对混凝土经时变化状态等的影响

众所周知,采用粉煤灰制备混凝土,因粉煤灰成分中含有未燃炭等微粒子,容易造成阴离子型引气剂吸附在这些微粒子上,导致含气量经时损失.同时在混凝土的制备、运输过程中,因受采用的材料、拌和状态等物理因素影响,还会发生含气量经时增加的现象.所以在制备、管理混凝土时,如何保证出机初期一定的含气量、缓解含气量的经时损失或经时增加,是一项极其关键的技术.本文将就采用能改善上述状态的引气剂、抑泡剂拌和混凝土,对混凝土的经时变化以及抗冻融性等特征产生的影响进行论述.