Multicolour micropatterning of thin films of dry gels

Micropatterning of surfaces with several chemicals at different spatial locations usually requires multiple stamping and registration steps. Here, we describe an experimental method based on reaction-diffusion phenomena that allows for simultaneous micropatterning of a substrate with several coloured chemicals. In this method, called wet stamping (WETS), aqueous solutions of two or more inorganic salts are delivered onto a film of dry, ionically doped gelatin from an agarose stamp patterned in bas relief. Once in conformal contact, these salts diffuse into the gelatin, where they react to give deeply coloured precipitates. Separation of colours in the plane of the surface is the consequence of the differences in the diffusion coefficients, the solubility products, and the amounts of different salts delivered from the stamp, and is faithfully reproduced by a theoretical model based on a system of reaction-diffusion partial differential equations. The multicolour micropatterns are useful as non-binary optical elements, and could potentially form the basis of new applications in microseparations and in controlled delivery.     

A tool for studying contact electrification in systems comprising metals and insulating polymers

We describe an analytical system for in situ measurement of the charge that develops by contact electrification when a ferromagnetic sphere rolls on the surface of a polymer. This system makes it possible to survey the ability of polymeric surfaces to charge by contact electrification. Because the measurement of charge using this tool does not require physical contact of the charged sphere with the measuring electrode, it also enables the kinetics of charging to be examined. The research has focused on the contact charging of spheres having a core-and-shell geometry (a common core of ferromagnetic steel, and a variable shell of thin films of metals, or metals with surface oxides) rolling on the surface of polymeric slabs; it has generated an internally consistent set of data that include the polarity and magnitude of charging for a homologous series of polymers that differ chemically in the pendant group on a polyethylene backbone.     

Glutathione depletion in the yeast Saccharomyces cerevisiae

The effect of chosen compounds on the total glutathione (GSH) level in stationary cultures of S. cerevisiae was compared. 1-Chloro-2,4-dinitrobenzene, 1-fluoro-2,4-dinitrobenzene, maleimide, iodacetamide and allyl alcohol (1 mM), and menadione (0.5 mM) caused an almost complete GSH depletion during several minutes. Bromobenzoic acid and chloramine T (I mM), and daunomycin (60 mu M) induced a slower GSH decrease, down to 30-70% after 60 min. Paraquat (1 mM), CuSO(4) (0.5 mM) and cadmium acetate (1 mM) decreased glutathione level down to ca 70%. Diamide (0.5 mM), phenazine methosulphate, phenylhydrazine, acetylphenylhydrazine and H(2)O(2) (1 mM), and t-butyl hydroperoxide (2 mM) did not affect total GSH during 60-min exposure. There was no clear-cut dependence between the ability of various chemicals to deplete cellular GSH and their increased toxicity to a glutathione-poor mutant.     

Menadione toxicity in Saccharomyces cerevisiae cells: activation by conjugation with glutathione

Menadione (2-methyl-1,4-naphthoquinone) has been used extensively as an oxidant stressor at the cellular level. However, the mechanism of cytotoxicity of this compound still remains controversial. This study deals with the role of intracellular glutathione in the resistance of the yeast Saccharomyces cerevisiae to menadione. Incubation with 0.5 mM menadione resulted in a decrease of total glutathione concentration in yeast cells, intracellular formation of menadione S-glutathione conjugate and export of the conjugate from cells. GSH-deficient mutants showed lower stimulation of superoxide and hydrogen peroxide production upon exposure to menadione and were more resistant to menadione than wild-type isogenic strains. These results indicate that in yeast cells the formation of S-glutathione conjugate is a major pathway of menadione metabolism and that this reaction leads to redox activation of menadione but permits its removal from the cells.     

Development of one-dimensional model for initial design and evaluation of oil-free Co2 turbo-compressor

A 1-dimenional tool for preliminary design and performance prediction of oil-free CO₂ compressor is presented. The model describes high speed centrifugal compressor in a hermetic configuration supported on foil gas bearings. To give possibly comprehensive overview of the technology, a wide range of loss mechanisms is considered. The model predicts aerodynamic performance of the compressor as well as losses related to the windage of rotor and bearings and due to the internal cooling. Numerical investigation of different compressor stages was used to validate aerodynamic predictions of the 1D model. Maximal prediction discrepancy amounted 2% for efficiency and 5% for pressure ratio. The prediction of the total compressor efficiency was compared with test data from a 50 kW compressor published Sandia Laboratories. The predicted peak compressor efficiencies are between 66 and 67.5% while experimentally measured values are within 65–70% region.     

Millimeter- and submillimeter-wave characterization of various fabrics

Transmission measurements of 14 fabrics are presented in the millimeter-wave and submillimeter-wave electromagnetic regions from 130 GHz to 1.2 THz. Three independent sources and experimental set-ups were used to obtain accurate results over a wide spectral range. Reflectivity, a useful parameter for imaging applications, was also measured for a subset of samples in the submillimeter-wave regime along with polarization sensitivity of the transmitted beam and transmission through doubled layers. All of the measurements were performed in free space. Details of these experimental set-ups along with their respective challenges are presented.     

Controlling the growth of "ionic" nanoparticle supracrystals

Dimensions and quality of supracrystals self-assembling from oppositely charged nanoparticles (NPs) can be controlled by changing the relative nanoparticle concentrations, NP polydispersity, and pH. In particular, excess nanoparticles of either polarity terminate the self-assembly process at desired stages by forming charged, stabilizing shells around the growing aggregates. In this way, average supracrystal sizes can be varied from several micrometers down to tens of nanometers. While larger crystals precipitate from the growing solution, those smaller than ca. 400 nm are soluble. The experimentally observed threshold size for solubility agrees with arguments based on the DLVO theory.     

Chatter detection algorithm based on machine vision

Production of precise high-value mechanical elements requires a hundred percent on-site control. Chatter may occur due to random events. Although an unaided human eye can also easily identify the presence of chatter marks, it is economically ineffective. Therefore, an algorithm based on machine vision signals was proposed for surface inspection. The algorithm was designed to build an error map of the examined surface and highlight the regions of probable imperfections. The algorithm is based on local gradient estimation, applied in respect to milling parameters. Estimated local gradient directions are used to calculate the ridge/valley orientations of the machined surface. The local ridge orientation is used for the purpose of computing the surface error map. An experiment was made to test the algorithm. Milled surfaces in both chatter-free and chatter-rich conditions have been analysed with the presented method.     

Electrostatic aggregation and formation of core-shell suprastructures in binary mixtures of charged metal nanoparticles

Electrostatic aggregation of oppositely charged silver and gold nanoparticles leads to the formation of core-shell clusters in which the shell is formed by the nanoparticles, which are in excess. Arguments based on Debye screening of interactions between like-charged particles help explain why these clusters are stable despite possessing net electric charge. The core-shell aggregates exhibit unusual optical properties with the resonance absorption of the shell particles enhanced by the particles in the core and that of the core suppressed by the shell. Experimental UV-vis absorption spectra are faithfully reproduced by Mie theory. The modeling allows for estimation of the numbers of particles forming the shell and of the shell's effective thickness. These theoretical predictions are substantiated by experiments using nanoparticles covered with different combinations of charged groups and performed at different values of pH.