Alterations in Membrane Phospholipid Fatty Acids of Gram-Positive Piezotolerant Bacterium Sporosarcina sp. DSK25 in Response to Growth Pressure

Pressure is an important thermodynamic property of the ocean and the deep biosphere that affects microbial physiology and biochemistry. Here, we report on our investigation of the response of Gram-positive piezotolerant bacterium Sporosarcina sp. DSK25 to hydrostatic pressure. Strain DSK25 responded in an adaptive manner to upshifts of growth pressure and showed systematic changes in phospholipid fatty acids. As the pressure increased from 0.1 to 10 MPa (Megapascal), unsaturated fatty acids in DSK25 increased from 21.7 to 31.1 % of total fatty acids, while the level of iso- and anteiso-branched fatty acids remained unchanged. At higher pressures (30, 50, and 60 MPa), the amount of unsaturated fatty acids decreased, and that of anteiso-branched fatty acids increased from 34.4 to 49.9 % at the expense of iso-branched fatty acids. For the first time, two polyunsaturated fatty acids (PUFA), 18:2n-6 and 18:2n-x, with the latter having much higher abundance than the former, were identified in DSK25. The concentration of the PUFA increased with growth pressure. These results indicate the involvement of unsaturated and methyl-branched fatty acids in the modulation of bacteria membrane fluidity and function over environmentally relevant parameter (pressure). Piezotolerant bacterium Sporosarcina sp. DSK25 appears to utilize two regulatory mechanisms for adaptation to high pressure, a rapid-responding mechanism on transient scale, expressed as increased biosynthesis of monounsaturated fatty acids, and a long-term adaptation mechanism in increased synthesis of anteiso-branched and polyunsaturated fatty acids. Our results further suggest that Gram-positive piezophilic bacteria respond differently than Gram-negative bacteria in adaptation to high pressure.     

Fabrication of Food Grade Vitamin E Nanoemulsion by Low Energy Approach,Characterization and Its Application

The present study was carried out to fabricate the food grade vitamin E acetate nanoemulsion using edible mustard oil and to evaluate its improved bioactivities. A food-grade vitamin E acetate nanoemulsion was fabricated using the edible mustard oil and surfactant Tween-80. Flocculation was not observed for 15 days. The nanoemulsion was characterized for droplet morphology and size distribution using atomic force microscope and zetasizer, respectively. We observe a stable nanoemulsion of spherical morphology and a size distribution of 86.45 ± 3.61 nm. Further, the high-performance liquid chromatography method was used to determine the vitamin E acetate concentration and encapsulation efficiency for the stable nanoemulsion. These nanoemulsions showed improved bioactivity, antioxidant, and antimicrobial activity and could be potentially used to increase the shelf life of fruit juice.     

Weldability and microstructural variations in weldments of Ti-5Ta-1.8Nb alloy

The successful replacement of the present generation of corrosion-resistant materials (nitric acid-grade stainless steel and Ti) by Ti-5Ta-1.8Nb, which has better corrosion resistance, depends on its weldability characteristics. This article presents the results of a study on the fabrication, qualification, and microstructural characterization of the welds. Welding was carried out using the direct current electrode negative (DCEN) polarity tungsten inert gas (TIG) (manual) welding method with high-purity Ar shielding. Testing was carried out as per the ASME standard (section IX, welding and brazing). Qualification tests found that the weldment met the required properties. The weldment showed heterogeneous microstructures, which are rationalized based on differences in phase transformation mechanisms that are dictated by the thermal cycles experienced by various microscopic regions. The results, described in this article, confirm that the weldability of the developmental Ti-Ta-Nb alloy is excellent. A preliminary evaluation of the corrosion behavior of the welds showed rates comparable to that of the base metal, establishing that this alloy could be considered as an alternative material for use in highly corrosive environments.     

Kharitonov''s theorem revisited

A simple interpretation of Kharitonov's theorem is given.     

A variational approach to path planning for hyper-redundant manipulators

Motion planning for hyper-redundant manipulators in a complicated and cluttered workspace is a challenging problem. Many of the path planning algorithms, based on cell decomposition or potential field, fail due to the high dimensionality and complex nature of the C-space. Probabilistic roadmap methods (PRM) which have been proven to be successful in high dimensional C-spaces suffer from the drawback of generating paths which involve a lot of redundant motion. In this paper, we propose a path optimizing method to improve a given path in terms of path length and the safety against the collisions, using a variational approach. The capability of variational calculus to optimize a path is demonstrated on a variety of examples. The approach succeeds in providing a good quality path even in high dimensional C-spaces.     

Simulations for the Development of Thermoelectric Measurements

In thermoelectricity, continuum theoretical equations are usually used for the calculation of the characteristics and performance of thermoelectric elements, modules or devices as a function of external parameters (material, geometry, temperatures, current, flow, load, etc.). An increasing number of commercial software packages aimed at applications, such as COMSOL and ANSYS, contain vkernels using direct thermoelectric coupling. Application of these numerical tools also allows analysis of physical measurement conditions and can lead to specifically adapted methods for developing special test equipment required for the determination of TE material and module properties. System-theoretical and simulation-based considerations of favorable geometries are taken into account to create draft sketches in the development of such measurement systems. Particular consideration is given to the development of transient measurement methods, which have great advantages compared with the conventional static methods in terms of the measurement duration required. In this paper the benefits of using numerical tools in designing measurement facilities are shown using two examples. The first is the determination of geometric correction factors in four-point probe measurement of electrical conductivity, whereas the second example is focused on the so-called combined thermoelectric measurement (CTEM) system, where all thermoelectric material properties (Seebeck coefficient, electrical and thermal conductivity, and Harman measurement of zT) are measured in a combined way. Here, we want to highlight especially the measurement of thermal conductivity in a transient mode. Factors influencing the measurement results such as coupling to the environment due to radiation, heat losses via the mounting of the probe head, as well as contact resistance between the sample and sample holder are illustrated, analyzed, and discussed. By employing the results of the simulations, we have developed an improved sample head that allows for measurements over a larger temperature interval with enhanced accuracy.     

Triazolinyl-controlled radical polymerization as innovative route to poly(hydroxyethyl methacrylate)

Summary 2,2'-Azoisobutyronitril (AIBN) initiated radical polymerization of trimethylsilyloxyethyl methacrylate (TMS-HEMA) was carried out in N,N-dimethylformamide (DMF) with the triazolinyl radical (T•) as additive. The latter effected a controlled polymerization process at least up to 60 % monomer conversion. The obtained poly(TMS-HEMA) with triazolin endfunctionality was applied to polymerize styrene, resulting in the formation of poly(TMS-HEMA)-block-polystyrene. Received: 22 February 2001/Accepted: 6 March 2001