Ethanol combustion over strontium- and cerium-doped LaCoO3 catalysts

Ce- or Sr-doped LaCoO₃ bulk perovskites were prepared by citric acid method as well as 10 wt.% of LaCoO₃ was deposited on alumina carrier stabilized with lanthanum. Properties of prepared materials were characterized by determination of surface area, acid-basic properties and XRD, XPS, TPDO₂, H₂-TPR measurements as well as catalytic activity and selectivity for ethanol combustion was tested. It was found that substitution of La in LaCoO₃ with either Sr or Ce has only small effect on its activity in ethanol combustion. Strontium inserted into LaCoO₃ structure increases basic character of the perovskite surface as well as selectivity to acetaldehyde (ACA). Substitution of La with cerium has no effect on the concentration of basic sites and does not affect the selectivity to ACA. Activity of LaCoO₃-based catalysts in ethanol combustion and their selectivity to ACA formation can be explained on the basis of the presence of both -oxygen species and sites with basic character on the material surface.

Acid-basic properties of supported LaCoO₃ are dominated by acidic character of the carrier. Results of XPS and H₂-TPR measurements of LaCoO₃ supported on La–Al₂O₃ suggest that perovskite remains in strong interaction with carrier and probably is partially decomposed. Deposition of perovskite on stabilized carrier significantly increases the rate of ethanol combustion.     

Quantitative microstructural characterisation of Fe–30Ni alloy after martensitic transformations by means of stereological and magnetic methods

In the Fe–30Ni alloy investigated a martensitic transformation can occur both during quenching or plastic deformation. Martensite formed during plastic deformation, depending on the thermo-mechanical treatment applied, exhibits a different morphology from that achieved during quenching and forms the so-called composite-like structure. The morphology and volume fraction of martensite depends both on strain and temperature. In the present studies Fe–30Ni alloy was deformed by monotonic rolling in one path and perpendicular rolling in the temperature range M_D–M_S. The aim of the investigations was a determination of martensite volume fraction depending on the strain and temperature. To examine the influence of strain, the alloy was deformed by rolling in one path or perpendicular rolling at a temperature of − 30 °C, in the strain range of 10–30%. The dependence of temperature was investigated by rolling with 30% strain in a temperature range from − 30 °C to − 80 °C. The variants of thermo-mechanical treatment performed enabled us to achieve different martensite morphologies and volume fractions. Microstructural analysis was performed by means of light microscopy and transmission electron microscopy. The results of quantitative microstructural analysis of martensite and retained austenite volume fractions formed in different thermo-mechanical treatments were compared with those obtained by magnetic measurements. The fraction of deformation-induced martensite determined varied from 2% to 86%. The partial volume fractions V_V^MF of martensite formed in different deformation directions were also determined. It was found that the influence of the temperature on the martensite volume fraction is more pronounced than the influence of strain.     

Assessment of the Influence of the Selected Range of Visible Light Radiation on the Durability of the Gel with Ascorbic Acid and Its Derivative

(1) Background: Depending on the type of hydrophilic polymer used, different types of hydrogels may be chemically stable or may degrade and eventually disintegrate, or dissolve upon exposure to sunlight. Many over-the-counter medications are now stored with a limited control of temperature, humidity and lighting. Therefore, in this study, the photostability of a gel made of cross-linked polyacrylic acid (PA), methylcellulose (MC) and aristoflex (AV) was assessed, and the interaction between the polymers used and ascorbic acid and its ethylated derivative was investigated. (2) Methods: The samples were continuously irradiated at constant temperature for six hours. The stability of the substance incorporated into the gels was assessed using a UV-Vis spectrophotometer. FTIR-ATR infrared spectroscopy was used to measure changes during the exposure. (3) Results: Ascorbic acid completely decomposed between the first and second hours of illumination in all samples. The exception is the preparation based on polyacrylic acid with glycerol, in which the decomposition of ascorbic acid slowed down significantly. After six hours of irradiation, the ethylated ascorbic acid derivative decomposed in about 5% for the polyacrylic acid-based gels and aristoflex, and in the methylcellulose gel it decomposed to about 2%. In the case of ascorbic acid, the most stable formulation was a gel based on polyacrylic acid and polyacrylic acid with glycerol, and in the case of the ethyl derivative, a gel based on methylcellulose. (4) Conclusions: The experiment showed significant differences in the decomposition rate of both compounds, resulting from their photostability and the polymer used in the hydrogel.     

New friction welding technology for joining tubes with lids

The article presents the results of research on the use of the new technology of friction welding with a non-wearing tool for welding pipe ends with lids. The pipes and lids were made of aluminium alloy EN AW 2017A, non-weldable by conventional methods. The aim of the study was to verify the possibility of welding the lid to the pipe using the FSW method as well as a new method with a tool with specially profiled friction surface. The article presents the results of structural tests and strength tests of the weld joints obtained using the new technique.     

Fabrication of biocompatible hydrogel coatings for implantable medical devices using Fenton-type reaction

In this paper the authors present a simple method of coating polyurethane (PU) surface with poly(vinyl pirrolidone) (PVP) hydrogel. The hydrogel-coated materials were designed for use in biomedical applications, especially in blood-contacting devices. The coating is formed due to free radical macromolecular grafting–crosslinking. Polymer surface was first immersed in an organic solution containing radical source: cumene hydroperoxide (CHP) with an addition of a branching and anchoring agent: ethylene glycol dimethylacrylate (EGDMA). In the second step, the substrate was immersed in a water solution containing given concentration of PVP and Fe²⁺. The novelty of the process consists in the fact that free radicals are formed mostly at the polymer/solution interface, what assures high grafting efficiency together with the formation of covalent bonds between polymer substrate and modifying layer.The process was optimized for reagents concentrations. The coating properties: thickness and the swelling ratio were strongly influenced by CHP, Fe²⁺, PVP and EGMDA concentrations. The chemical composition of the surface analyzed with FTIR-ATR spectroscopy confirmed the presence of PVP coating. In vitro biocompatibility tests with L929 fibroblasts confirmed non-cytotoxicity of the coatings. Hydrogel coating significantly improved polyurethane hemocompatibility. Studies with human whole blood revealed that both, the platelet consumption and the level of platelet activation were as low as for negative control.     

Photocatalytic hydrogen generation with Ag-loaded LiNbO3

In this contribiution LiNbO₃ and Ag-loaded LiNbO₃ photocatalysts were tested in the reaction of hydrogen evolution. The silver modified samples contained different loading of co-catalyst in the range of 0.5–4 wt%. It was essential to optimize the sample composition to achieve an efficient hydrogen evolution. The optimal sample contained 2 wt% of silver. The detailed analysis indicated that silver was deposited on the surface of LiNbO₃ in the form of Ag₂O. Therefore, it is supposed that Ag₂O was responsible for the enhanced photocatalytic activity in the studied reaction. The crystallographic phases and optical and vibronic properties were examined by X-ray diffraction (XRD) and diffuse reflectance (DR) UV-Vis and resonance Raman spectroscopic methods, respectively. Morphology of the produced samples were studied using a high-resolution transmission electron microscope (HRTEM).     

Acrylic bone cements modified with poly(ethylene glycol)‐based biocompatible phase‐change materials

The high polymerization temperature of acrylic bone cements used in hip replacement implantation may cause thermal necrosis of surrounding tissues. In order to reduce the polymerization temperature, acrylic bone cement has been modified with a biocompatible polymeric phase‐change material (PCM) based on poly(ethylene glycol) (PEG) of different molecular weights and stabilized with potato starch. Structural and morphological studies were performed, and the thermal and mechanical properties were investigated. The incorporation of PEG‐based PCM led to a decrease in the polymerization temperature of bone cement from 70 °C for unmodified cement to 58 °C for modified cement. Modified cement materials were stable in incubation tests, although acoustic analysis data revealed a decrease in propagation speed after incubation, which indicates formation of material defects (pores, cracks, voids, etc.) due to water activity. However, in the regeneration process, these defects can be filled by freshly grown bone tissue leading to better incorporation of bone cement replacements into tissue. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43898.     

Staphylococcus aureus—A Known Opponent against Host Defense Mechanisms and Vaccine Development—Do We Still Have a Chance to Win?

The main purpose of this review is to present justification for the urgent need to implement specific prophylaxis of invasive Staphylococcus aureus infections. We emphasize the difficulties in achieving this goal due to numerous S. aureus virulence factors important for the process of infection and the remarkable ability of these bacteria to avoid host defense mechanisms. We precede these considerations with a brief overview of the global necessitiy to intensify the use of vaccines against other pathogens as well, particularly in light of an impasse in antibiotic therapy. Finally, we point out global trends in research into modern technologies used in the field of molecular microbiology to develop new vaccines. We focus on the vaccines designed to fight the infections caused by S. aureus, which are often resistant to the majority of available therapeutic options.