Optimization models for operative planning in drinking water networks

The topic of this paper is minimum cost operative planning of pressurized water supply networks over a finite horizon and under reliable demand forecast. Since this is a very hard problem, it is desirable to employ sophisticated mathematical algorithms, which in turn calls for carefully designed models with suitable properties. The paper develops a nonlinear mixed integer model and a nonlinear programming model with favorable properties for gradient-based optimization methods, based on smooth component models for the network elements. In combination with further nonlinear programming techniques (Burgschweiger et al. in ZIB Report ZR-05-31, Zuse Institute Berlin, 2005), practically satisfactory near-optimum solutions even for large networks can be generated in acceptable time using standard optimization software on a PC workstation. Such an optimization system is in operation at Berliner Wasserbetriebe.     

Pattern formation in constrained dendritic growth with solutal buoyancy

Competing self-organization between the solidification pattern and the convection pattern in a directional solidification environment is investigated theoretically and by phase-field simulations. Melt flow introduces a mode of transport with broken symmetry dependent on the direction of growth relative to the vector of gravity. A stable and an unstable regime can be distinguished. The interaction between spacing selection and convection leads to a new type of scaling that explains results from phase-field simulations and solidification experiments under enhanced gravity.     

Rationalisierung des Zeichnungswesens im Chemie-Apparatebau

Rationalizing drawings for chemical apparatus . For small and medium-sized manufacturers of apparatus, producing drawings may constitute a disproportionate waste of time and personnel, particularly when no new designs are involved but only modification or improvement of drawings supplied by the customer. One possibility for rationalizing drawing is to simplify the old-fashioned approach by using symbols for frequently drawn or standard items, or by listing alphanumerically. This presumes a kind of systematization permitting determination of those symbols and their reasonable use, as well facilitating rationalization by means of data processing. There are different approaches to computer-aided drawing (from computer controlled drawing-board to interactive screens); here a CAD programme is presented which was especially developed for graphic presentation of chemical apparatus, and which can be used without learning a programming language.     

Furan and Methylfurans in Foods: An Update on Occurrence,Mitigation, and Risk Assessment

The acceptance of many foods is related to traditional cooking practices, which create taste and texture and are important to digestibility, preservation, and the reduction of foodborne illnesses. A wide range of compounds are formed during the cooking of foods, a number of these have been shown to lead to adverse effects in classical toxicological models and are known as food processing contaminants (FPC). It is essential that the presence and effects of such compounds alone and in combination within the diet are understood such that proportionate risk management measures can be developed, while taking a holistic view across the whole value chain. Furan and alkylfurans (principally 2‐ and 3‐methylfuran) are highly volatile FPC, which are formed in a wide range of foods at low amounts. The focus of research to‐date has been on those foods, which have been identified to be most consequential in terms of being sources of exposure, namely jarred and canned foods for infants and young children (meals and drinks) and coffee (roast and ground, soluble). This report presents (i) new industry data on the occurrence of furan and methylfurans in selected food categories following previous coffee studies, (ii) the most salient parameters that impact furan formation, and (iii) aspects of importance for the risk assessment.     

Capacities of membrane lipids to accumulate neutral organic chemicals

Lipids have been considered as the predominant components for bioaccumulation of organic chemicals. However, differences in accumulation properties between different types of lipid (e.g., storage and membrane lipids) have rarely been considered. Moreover, in view of toxic effects on organisms, chemical accumulation specifically in biological membranes is of particular importance. In this review article, partition coefficients of 240 neutral organic compounds between liposomes (phospholipid membrane vesicles) and water (K(lipw)), reported in the literature or measured additionally for this work, were evaluated. Values of log K(lipw) and log K(ow) (octanol-water partition coefficients) differ by 0.4 on average. Polyparameter linear free energy relationships (PP-LFERs) can describe the log K(lipw) data even better (standard deviations = 0.28-0.31) than the log K(ow) model. Recent experimental data for highly hydrophobic compounds fit well to the PP-LFERs and do not indicate the existence of a previously postulated "hydrophobicity cutoff". Predictive approaches based only on the molecular structure (KOWWIN, SPARC, COSMOthermX, COSMOmic) were also evaluated for K(lipw) prediction. The PP-LFERs revealed that partition coefficients into membrane lipids can be two log units higher than those into storage lipids for H-bond donor compounds, suggesting that distinguishing between the two lipids is necessary to account for the bioaccumulation of these compounds, and that tissues rich in membrane lipids (e.g., kidneys, liver) instead of fat tissue can be the primary phase for accumulation.     

Natural versus wastewater derived dissolved organic carbon: implications for the environmental fate of organic micropollutants

The interaction of organic micropollutants with dissolved organic carbon (DOC) can influence their transport, degradation and bioavailability. While this has been well established for natural organic carbon, very little is known regarding the influence of DOC on the fate of micropollutants during wastewater treatment and water recycling. Dissolved organic carbon-water partition coefficients (K_DOC) for wastewater derived and reference DOC were measured for a range of micropollutants using a depletion method with polydimethylsiloxane disks. For micropollutants with an octanol-water partition coefficient (log K_OW) greater than 4 there was a significant difference in K_DOC between reference and wastewater derived DOC, with partitioning to wastewater derived DOC over 1000 times lower for the most hydrophobic micropollutants. The interaction of nonylphenol with wastewater derived DOC from different stages of a wastewater and advanced water treatment train was studied, but little difference in K_DOC was observed. Organic carbon characterisation revealed that reference and wastewater derived DOC had very different properties due to their different origins. Consequently, the reduced sorption capacity of wastewater derived DOC may be related to their microbial origin which led to reduced aromaticity and lower molecular weight. This study suggests that for hydrophobic micropollutants (log K_OW > 4) a higher concentration of freely dissolved and thus bioavailable micropollutants is expected in the presence of wastewater derived DOC than predicted using K_DOC values quantified using reference DOC. The implication is that naturally derived DOC may not be an appropriate surrogate for wastewater derived DOC as a matrix for assessing the fate of micropollutants in engineered systems.     

A method for determination of length distributions of multiwalled carbon nanotubes before and after melt processing

A relatively simple method to determine the length distribution of carbon nanotubes (CNTs) before and after melt processing was developed. This involves the selection of a suitable solvent for dispersing pristine CNTs as well as to dissolve the matrix of melt mixed composites and the choice of an appropriate nanotube concentration. The length of suitably individualized CNTs was visualized using transmission electron microscopy and length distributions were measured using image analysis. Examples are shown for Baytubes® C150HP and Nanocyl™ NC7000 and their melt mixed composites with polycarbonate where the same procedure was applied to both, measuring the initial length distribution and the distribution after recovering from the composites. These results indicated a significant shortening after melt processing up to 30% of the initial length.     

Fundamental influences of particles on stirred and unstirred venting processes of foaming systems

Venting is the common safety measure to protect plant equipment against excessive overpressure. So far, scenarios in which particles were part of the system and should have been accounted for did ignore their presence; the scenarios were treated like a two-phase system. Current research shows that particles can have a major influence on the venting behaviour. Experimental results indicate that particles affect level swell and relief flow especially of foamy systems. Based on those results four different layers of influence of the particle have been identified and are presented in a first model. Based on this model recommendations for the development of new and more complex models are given.