Modeling of the condyle elements within a biomechanical knee model

The development of a computational multibody knee model able to capture some of the fundamental properties of the human knee articulation is presented. This desideratum is reached by including the kinetics of the real knee articulation. The research question is whether an accurate modeling of the condyle contact in the knee will lead to reproduction of the complex combination of flexion/extension, abduction/adduction, and tibial rotation observed in the real knee. The model is composed by two anatomic segments, the tibia and the femur, whose characteristics are functions of the geometric and anatomic properties of the real bones. The biomechanical model characterization is developed under the framework of multibody systems methodologies using Cartesian coordinates. The type of approach used in the proposed knee model is the joint surface contact conditions between ellipsoids, representing the two femoral condyles, and points, representing the tibial plateau and the menisci. These elements are closely fitted to the actual knee geometry. This task is undertaken by considering a parameter optimization process to replicate experimental data published in the literature, namely that by Lafortune and his coworkers in 1992. Then kinematic data in the form of flexion/extension patterns are imposed on the model corresponding to the stance phase of the human gait. From the results obtained, by performing several computational simulations, it can be observed that the knee model approximates the average secondary motion patterns observed in the literature. Because the literature reports considerable inter-individual differences in the secondary motion patterns, the knee model presented here is also used to check whether it is possible to reproduce the observed differences with reasonable variations of bone shape parameters. This task is accomplished by a parameter study, in which the main variables that define the geometry of condyles are taken into account. It was observed that the data reveal a difference in secondary kinematics of the knee in flexion versus extension. The likely explanation for this fact is the elastic component of the secondary motions created by the combination of joint forces and soft tissue deformations. The proposed knee model is, therefore, used to investigate whether this observed behavior can be explained by reasonable elastic deformations of the points representing the menisci in the model.     

Enterprise architecture,IT effectiveness and the mediating role of IT alignment in US hospitals

Despite the possible benefits of implementing healthcare information technologies, successful implementation of effective healthcare information technology is constrained by cultural and regulatory concerns and technical obstacles encountered when establishing or upgrading an organisation's enterprise infrastructure. In this paper, we advance Ross' four‐stage model of enterprise architecture maturity as a valuable IT resource for helping healthcare organisations sustain a competitive advantage. We use partial least squares (PLS) structural equation modelling to analyse survey data from 164 US hospitals at different stages of EA maturity. Our results provide evidence that enterprise architecture maturity directly influences the effectiveness of hospitals' IT resources for achieving strategic goals. Further, enterprise architecture maturity indirectly influences the effectiveness of IT resources when IT alignment is incorporated as a mediating variable. We discuss the implications of our findings for research and practice and suggest opportunities for future research.     

Automatic stress exaggeration by prosody modification to assist language learners perceive sentence stress

In this paper, we propose a set of automatic stress exaggeration methods that can enlarge the differences between stressed and unstressed syllables. Our stress exaggeration methods can be used in computer-aided language learning systems to assist second language learners perceive stress patterns. The intention of our automatic stress exaggeration methods is to support hyper-pronunciation training which is commonly used in classrooms by teachers. In hyper-pronunciation training, exaggeration is used to help learners increase their awareness of acoustic features and effectively apply these features into their pronunciation. Duration, pitch and intensity have been claimed to be the main acoustic features that are closely related to stress in English language. Thus, four stress exaggeration methods are proposed in this paper: (i) duration-based stress exaggeration, (ii) pitch-based stress exaggeration, (iii) intensity-based stress exaggeration, and (iv) a combined stress exaggeration method that integrates the duration-based, pitch-based and intensity-based exaggeration methods. Our perceptual experimental results show that resynthesised stimuli by our proposed stress exaggerated methods can help learners of English as a Second Language (ESL) better perceive English stress patterns significantly.     

Propagation of transverse bulk and surface acoustic waves in LiNbO (3) variable time-delay devices

Experimental measurements are reported on voltage-controlled acoustic time-delay lines operating at 1 GHz in the nearly pure shear-horizontal (S-H) mode in 38 degrees rotated Y-cut LiNbO(3). The high-acoustic velocity (4800 m/s) in conjunction with the large electroacoustic effect exhibited by this orientation allows high-frequency operation and optimum time-delay tuning sensitivity with a planar, single surface, device geometry. The authors demonstrate fractional time delay of 0.3x10(-6) V(-1 ) for surface electrodes that produce an in-plane E-field. However, the simultaneous excitation and propagation of both a leaky surface-acoustic wave (LSAW) and surface skimming bulk wave (SSBW), both as (nearly pure) S-H waves in these devices, seriously restricts the extent to which it is possible to maximize the time delay modulation sensitivity by reducing electrode gap spacing as done in similar SAW devices. The LSAW and surface-skimming body wave (SSBW) propagate at nearly the same velocity on a free surface, and perturbation of their velocity and relative attenuation rates by surface electrodes causes pronounced interference effects between the two modes for some device geometries.     

Flavonoids of “La Alcarria” honey A study of their botanical origin

Summary The flavonoids present in ten selected samples of La Alcarria honey with different pollen compositions have been HPLC analysed in order to establish if correlations between botanical origin and flavonoid profiles are possible. A common flavonoid pattern is observed in the different samples showing that pollen is not the main source of honey flavonoids. A close correlation between the flavonoid patterns of honey flavonoids and propolis flavonoids has been found suggesting that flavonoid analysis could be more useful in geographical origin determinations than in botanical origin studies.

---

Flavonoide des La-Alcarria-Honigs Eine Studie ihres botanischen Ursprungs

Zusammenfassung Die Flavonoide in Proben in Alcarria-Honig mit unterschiedlicher Pollenzusammensetzung wurden untersucht, um Kortrelationen zwischen dem botanischen Ursprung und den möglichen Flavonoiden zu finden. In den verschiedenen Proben wurde ein Flavonoid-Muster gefunden, wobei der Pollen nicht die Hauptquelle der Honigflavonoide ist. Es wurde jedoch eine enge Korrelation zwischen den Flavonoid-Mustern des Honigs und des Bienenkittharzes gefunden, was für die geographische Herkunft wichtiger ist als die botanische.

     

A random dipole model for spontaneous brain activity

The statistical properties of the EEG and the MEG are described mathematically as the result of randomly distributed dipoles. These dipoles represent the interactions of cortical neurons. For certain dipole distributions, the first- and second-order moments of the electric and magnetic fields are derived analytically. If the dipoles are in a spherical volume conductor and have no preference for any direction, the variance of a differentially measured EEG-signal is only a function of the electrode distance. In this paper, the theoretically derived variance function will be compared with EEG- and MEG-measurements. It is shown that a dipole with a fixed position and a randomly fluctuating amplitude is an adequate model for the alpha-rhythm. An expression for the covariance between the magnetic field and a differentially measured EEG-signal is derived. This covariance is considered as a function of the magnetometer position, and is compared with the measurements of Chapman et al. [23]. The theory can be used to obtain a (spatial) covariance matrix of the background noise, which occurs in evoked potential measurements. Such a covariance matrix can be used to obtain a maximum likelihood estimator of the dipole parameters in evoked potential studies, to evaluate the merits of the so-called "Laplacian derivation," and for the interpolation of electromagnetic data.     

Acoustic microscopy and nonlinear effects in pressurized superfluid helium

The operation of an acoustic microscope having a resolution of 15 mm has been demonstrated. It uses as a coupling medium superfluid (4 )He colder than 0.9 K and pressurized to greater than 20 bar. The microscope has been used to image objects that show little or no contrast on a scanning electron microscope. In addition, the acoustic microscope has been used to study the properties of sound propagation in the coupling fluid. At low acoustic intensities, the coupling fluid has very low acoustic attenuation at the microscope's operating frequency (15.3 GHz), but near the focal point the acoustic intensity can be high enough that the helium behaves with extreme nonlinearity. In fact, this medium is capable of entering new regimes of nonlinear interaction. Plots of the received signal versus input power display a nearly complete source depletion at certain input power levels and a reconversion to the source frequency at higher power levels. Arguments that the process underlying this nonlinear behavior is harmonic generation are presented.     

Authors' reply

This reply clarifies that it is possible to change the plane of cut by filtering a tomogram, if the presence of the out-of-focus images is tolerated, because the (projected) images of all the layers are superimposed on the film and any filtering will process all these images simultaneously.     

Steric stabilization of Stöber silica dispersions using organosilanes

Organosilanes of the general formula R _x Si(OR)_4–x (where R is an alkyl group and R = CH₃ or CH₂CH₃) were used to sterically stabilize hexane dispersions of submicrometre silica spheres. The dispersions were characterized according to sediment volume results. For 0.5m silica particles, the sediment density increased by more than a factor of three up to 50 to 55% of theoretical in the presence of organosilanes with 12 or more carbons in the R group. Solid-state¹³C nuclear magnetic resonance was used to characterize the powder-dispersant interaction; this technique can distinguish between carbons in the R group of the organosilane and residual organic groups in the silica. Scanning electron micrographs of filter compacts were used to further characterize the dispersions and indicated the presence of primary particles as well as small agglomerates.     

Structure and catalytic activity of highly ordered AlMCM-48 materials with different Si/Al ratios on the degradation of high-density polyethylene

Journal of Porous Materials - Catalysts of AlMCM-48 with different Si/Al molar rations were synthesized by modified hydrothermal method with respect to previous works. As a consequence, the...