Effect of processing method on microstructure,electrical conductivity and electromagnetic wave interference (EMI) shielding performance of carbon nanofiber filled thermoplastic polyurethane composites

In this study, effect of processing method on microstructure formation and related electrical conductivity and electromagnetic interference shielding effectiveness of carbon nanofiber (CNF) filled thermoplastic polyurethane (TPU) composites, prepared via three different processing techniques; (i) melt compounding (MC) in a twin screw extruder, (ii) simple solution mixing (SM) on a magnetic stirrer, and (iii) solution mixing with sonication (SM-U) were investigated. It was found that the electrical conductivity values of samples decreased in the order of SM > SM-U > MC for a particular amount of CNF. The electromagnetic test results showed that the samples prepared with SM and SM-U methods yielded higher total shielding effectiveness (SE_T) values than those prepared with MC. SE_T values of samples including of 20 phr of CNF prepared with MC, SM-U and SM methods were varied in the range of 10–30 dB, 20–60 dB and 20–80 dB, respectively within a frequency range of 1–12 GHz.     

Interaction between manufactured gold nanoparticles and naturally occurring organic macromolecules

The increasing exploitation of nanomaterials into many consumer and other products is raising concerns as these nanomaterials are likely to be released into the environment. Due to our lack of knowledge about the environmental chemistry, transport and ecotoxicology of nanomaterials, it is of paramount importance to study how natural aquatic colloids can interact with manufactured gold nanoparticles as these interactions will determine their environmental fate and behaviour. In this context, our work aims to quantify the effect of naturally occurring riverine macromolecules--International Humic Substances Society (IHSS) Suwannee River Humic Acid Standard (SRHA)--on citrate- and acrylate-stabilized gold nanoparticles. The influence of SRHA on the stability of the gold colloids was studied as a function of pH by UV-visible absorption spectroscopy, dynamic light scattering (DLS) and transmission electron microscopy (TEM). At high ionic strengths (0.1 M), extensive and rapid aggregation occurred, while more subtle effects were observed at lower ionic strength values. Evidence was found that SRHA enhances particle stability at extreme pH values (ionic strength<0.01 M) by substituting and/or over-coating the original stabilizer on the gold nanoparticle surface, thus affecting surface charge and chemistry. These findings have important implications for the fate and behaviour of nanoparticles in the environment and their ecotoxicity.     

Effects of Ni doping on photocatalytic activity of TiO<Subscript>2</Subscript> thin films prepared by liquid phase deposition technique

The TiO₂ thin films doped by Ni uniformly and non-uniformly were prepared on glass substrate from an aqueous solution of ammonium hexa-fluoro titanate and NiF₂ by liquid phase deposition technique. The addition of boric acid as an F ⁻ scavenger will shift the equilibrium to one side and thereby deposition of the film is progressed. The rate of the reaction and the nature of deposition depend on growing time and temperature. The resultant films were characterized by XRD, EDAX, UV and SEM. The result shows that the deposited films have amorphous background, which becomes crystalline at 500°C. The EDAX data confirms the existence of Ni atoms in TiO₂ matrix. XRD analysis reveals the peaks corresponding to Ni but no peak of crystalline NiO was found. The transmittance spectra of Ni uniformly and non-uniformly doped TiO₂ thin films show ‘blue shift and red shift’, respectively. Ni-doped TiO₂ thin films can be used as photocatalyst for the photodegradation of methyl orange dye. It was found that, organic dye undergoes degradation efficiently in presence of non-uniformly Ni-doped TiO₂ thin films when compared to uniformly doped films and pure TiO₂ films under visible light. The photocatalytic activity increases with increase in the concentration of Ni in case of nonuniformly doped thin films but decreases with the concentration when uniformly doped thin films were used.     

Effect of acute exposure of the organophosphate insecticide Rogor on some biochemical aspects of Clarias batrachus (Linnaeus)

The prevalence of DSM-IV atypical depression and comparisons between atypical and typical depression were studied in 203 consecutive unipolar and bipolar depressed outpatients presenting for treatment of depression in private practice. The prevalence of atypical depression was 31%. Of the variables investigated (unipolar/bipolar diagnosis, age at baseline/onset of first major depressive episode, gender, psychosis, comorbidity, chronicity, duration of illness, recurrence, and severity), a bipolar II diagnosis was significantly more common, the age at baseline and duration of illness were significantly lower, and the proportion of females and psychiatric comorbidity were significantly higher in atypical versus typical depression. Secondary analysis showed that bipolar II atypical depression had a significantly earlier age at baseline/onset and affected more females, but there were no other significant differences versus typical depression. The findings suggest important clinical differences between atypical and typical depression, and a bipolar II subtype may be separated from the broad category of atypical depression.     

Photovoltaic properties of nanocrystalline CdS films deposited by SILAR and CBD techniques—a comparative study

CdS films were fabricated using Successive Ionic Layer Adsorption and Reaction (SILAR) technique from starting solutions having S:Cd ratio 1:1, 3:1, 5:1 and 7:1 and their structural, surface morphological and optical properties were investigated and compared with that of their chemical bath deposited counterparts. The X-ray diffraction profiles showed that the films have cubic crystal structure with preferential orientation along the (111) plane and the intensity of the (111) plane increases for both the techniques as the S:Cd ratio increases. The energy dispersive X-ray analysis revealed that for SILAR deposited films, the S/Cd ratio in the sample increases from 0.8308 (for S:Cd 1:1) to 1.04 (for S:Cd 7:1) as the molar concentration of sulphur in the starting solution increases. But for CBD films, the S/Cd is only ~0.80 for all concentrations of sulphur in the starting solution. The optical band gap increases with the increase in S:Cd ratio in the starting solution in both the techniques.     

Characterisation of hollow Russian doll microspheres

Poly(1-methylpyrrol-2-yl)squaraine (PMPS) particles have been characterised using SEM. The PMPS particles were used as templates to prepare bare silica and iron–silica hollow spheres, which were characterised using TEM and SEM. The PMPS particles and the hollow spheres are not uniformly sized and are agglomerated. The hollow spheres with larger diameters (>900 nm) contain an internal ‘Russian doll’ structure. The iron–silica hollow spheres are fused to one another, and the hollow spheres have a heterogeneous wall thickness. The silica and iron–silica hollow spheres both aggregate by size. There are two different size populations (for the diameter) of the bare silica and iron–silica hollow spheres. The smaller silica spheres have thinner walls compared to the larger silica hollow spheres. The larger silica hollow spheres and the iron–silica hollow spheres have similar wall thicknesses. The iron compound in the iron–silica hollow spheres has an oxidation state of 3+ and is crystalline.     

Fabrication of a novel SnO2:Al/ZnO:F bi-layer for opto-electronic applications

Single layered aluminium doped tin oxide (ATO), fluorine doped zinc oxide (FZO) and bi-layered ATO/FZO thin films were deposited onto preheated glass substrates (T_s = 340 ± 5 °C) using a low-cost and simplified spray pyrolysis technique. The structural, optical, electrical and surface morphological properties of the bi-layered ATO/FZO thin films were studied and compared with that of the single layered films. The average optical transmittance of the bi-layer film in the visible range was found to be around 80 %. The bi-layered ATO/FZO films possessed both better transmittance in the visible range and sharp absorption edge, the unique desirable features of ATO and FZO films, respectively. The optical band gap (E_g) value of the bi-layer coating (3.22 eV) was found to lie between the E_g values of single layered ATO (3.71 eV) and FZO (3.20 eV) films. Sheet resistance values of ATO and FZO single layer films were 3.47 and 11.2 kΩ/sq., respectively. The bi-layered ATO/FZO thin films exhibited a sheet resistance of 4.42 kΩ/sq. which was very much close to that of ATO films and three times less than that of FZO film. The AFM images showed the good packing density and homogeneity of the surface of the bi-layer films. The annealing studies clearly showed that the ATO over layer remarkably improved the thermal stability of the bi-layered film.     

Studies of the tensile and corrosion fatigue behaviour of austenitic stainless steels

Corrosion fatigue behaviour of four types of austenitic stainless steels were investigated in boiling 45% magnesium chloride solution at a stress ratio of 0.25 and a frequency of 0.1 Hz. Type 316LN stainless steel possessed the best resistance and type 304 stainless steel had the lowest resistance to corrosion fatigue. XPS studies on the fracture surface indicated that the presence of nitrogen as ion in the surface film of type 316LN stainless steel gave it the highest resistance to corrosion fatigue. Fractographic examination showed wholly transgranular cracking in all cases.     

Bread fortified with dietary fibre extracted from culinary banana bract: its quality attributes and in vitro starch digestibility

The effect of fortification of dietary fibre (DF) on dough rheology, quality characteristics and in vitro starch digestibility of bread was studied. Bread was prepared incorporating DF (2–4 g per 100 g of flour mixture). Rheological study of dough showed an increase in dough stiffness and elasticity with higher incorporation of the DF. The results of chemical composition revealed that addition of DF increased total DF (19.65 g per 100 g) content of bread. However, incorporation of 2 g per 100 g DF of flour mixture with 66 g per 100 g moisture showed higher water retention and specific volume of 86.76% and 5.83 cm³ g⁻¹, respectively, which was close to control bread. Improved textural property with acceptable sensory attributes was observed for bread fortified with 2 g per 100 g DF of flour mixture and 66 g per 100 g moisture content. Incorporation of DF (2–4 g per 100 g of flour mixture) showed a decrease in rapidly digestible starch (RDS) and an increase in slowly digestible starch (SDS) content with lower predicted glycaemic index (pGI) than control bread.