Operating Environment-Based Availability Importance Measures for Mining Equipment (Case Study: Sungun Copper Mine)

When a system’s performance is inadequate, the concept of availability importance can be used to improve it. The availability of an item depends on the combined aspects of its reliability and maintainability. In a system consisting of many subsystems, the availability of some subsystems is more important to system performance than others. The availability measure determines the priority of availability across subsystems. Most researchers only consider operation time and ignore the influence of the operating environment; therefore, their estimations are not accurate enough. In contrast to previous research, we focus on the influence of the operating environment on the system/subsystem’s characteristics with a view to prioritizing them based on the importance of availability. The paper considers part of the mining fleet system of Sungun copper mine, including the wagon drill, loader, bulldozer, and dump truck subsystems. We identify an ordered list of possibilities for availability improvement and suggest changes or remedial actions for each item to either reduce its failure rate or reduce the time required to repair it.     

Freestanding hierarchical porous carbon film derived from hybrid nanocellulose for high-power supercapacitors

Nanocellulose is a sustainable and eco-friendly nanomaterial derived from renewable biomass.In this study,we utilized the structural advantages of two types of nanocellulose and fabricated freestanding carbonized hybrid nanocellulose films as electrode materials for supercapacitors.The long cellulose nanofibrils (CNFs) formed a macroporous framework,and the short cellulose nanocrystals were assembled around the CNF framework and generated micro/mesopores.This two-level hierarchical porous structure was successfully preserved during carbonization because of a thin atomic layer deposited (ALD) Al2O3 conformal coating,which effectively prevented the aggregation of nanocellulose.These carbonized,partially graphitized nanocellulose fibers were interconnected,forming an integrated and highly conductive network with a large specific surface area of 1,244 m2·g-1.The two-level hierarchical porous structure facilitated fast ion transport in the film.When tested as an electrode material with a high mass loading of 4 mg·cm-2 for supercapacitors,the hierarchical porous carbon film derived from hybrid nanocellulose exhibited a specific capacitance of 170 F.g-1and extraordinary performance at high current densities.Even at a very high current of 50 A·g-1,it retained 65％ of its original specific capacitance,which makes it a promising electrode material for high-power applications.     

On challenges of model transformation from UML to Alloy

The Unified Modeling Language (UML) is the de facto language used in the industry for software specifications. Once an application has been specified, Model Driven Architecture (MDA) techniques can be applied to generate code from such specifications. Since implementing a system based on a faulty design requires additional cost and effort, it is important to analyse the UML models at earlier stages of the software development lifecycle. This paper focuses on utilizing MDA techniques to deal with the analysis of UML models and identify design faults within a specification. Specifically, we show how UML models can be automatically transformed into Alloy which, in turn, can be automatically analysed by the Alloy Analyzer. The proposed approach relies on MDA techniques to transform UML models to Alloy. This paper reports on the challenges of the model transformation from UML class diagrams and OCL to Alloy. Those issues are caused by fundamental differences in the design philosophy of UML and Alloy. To facilitate better the representation of Alloy concepts in the UML, the paper draws on the lessons learnt and presents a UML profile for Alloy.     

Stochastic chaos synchronization using Unscented Kalman-Bucy Filter and sliding mode control

This paper presents an algorithm for synchronizing two different chaotic systems by using a combination of Unscented Kalman-Bucy Filter (UKBF) and sliding mode controller. It is assumed that the drive chaotic system is perturbed by white noise and shows stochastic chaotic behavior. In addition the output of the system does not contain the whole state variables of the system, and it is also affected by some independent white noise. By combining the UKBF and the sliding mode control, a synchronizing control law is proposed. Simulation results show the ability of the proposed method in synchronizing chaotic systems in presence of noise.     

He’s homotopy perturbation method: A strongly promising method for solving non-linear systems of the mixed Volterra–Fredholm integral equations

In this paper, He’s homotopy perturbation method is applied to solve non-linear systems of mixed Volterra–Fredholm integral equations. Two examples are presented to illustrate the ability of the method. Also comparisons are made between the Adomian decomposition method and the homotopy perturbation method. The results reveal that He’s homotopy perturbation method is very effective and simple and in these examples leads to the exact solutions.     

Thermal–economic–environmental analysis and multi-objective optimization of an internal-reforming solid oxide fuel cell–gas turbine hybrid system

In this article, an internal-reforming solid oxide fuel cell–gas turbine (IRSOFC–GT) hybrid system is modeled and analyzed from thermal (energy and exergy), economic, and environmental points of view. The model is validated using available data in the literature. Utilizing the genetic algorithm optimization technique, multi-objective optimization of modeled system is carried out and the optimal values of system design parameters are obtained. In the multi-objective optimization procedure, the exergy efficiency and the total cost rate of the system (including the capital and maintenance costs, operational cost (fuel cost), and social cost of air pollution for CO, NO_x, and CO₂) are considered as objective functions. A sensitivity analysis is also performed in order to study the effect of variations of the fuel unit cost on the Pareto optimal solutions and their corresponding design parameters. The optimization results indicate that the final optimum design chosen from the Pareto front results in exergy efficiency of 65.60% while it leads to total cost of 3.28 million US$ year⁻¹. It is also demonstrated that the payback time of the chosen design is 6.14 years.     

Blood supply chain network design considering blood group compatibility under uncertainty

This paper addresses the design of a blood supply chain (SC) network considering blood group compatibility. To this aim, a bi-objective mathematical programming model is developed which minimises the total cost as well as the maximum unsatisfied demand. Due to uncertain nature of some input parameters, two novel robust possibilistic programming models are proposed based on credibility measure. The data of a real case study are then used to illustrate the applicability and performance of the proposed models as well as validating the proposed robust possibilistic programming approach. The obtained results show the superiority of the developed models and significant cost savings compared to current existed blood SC network.     

Simple preparation and characterization of molecularly imprinted nylon 6 nanofibers for the extraction of bisphenol A from wastewater

Nylon 6 nanofibers incorporated with molecularly imprinted polymers (MIPs) were successfully fabricated by electrospinning with fiber diameters in the range 80–145 nm. Then, they were used as a new material for the extraction of selected bisphenol A (BPA) in water samples. Field emission scanning electron microscopy images revealed that the nanofibers had a smooth morphology with a good incorporation of MIPs. The Fourier transform infrared and energy-dispersive X-ray spectroscopy results also confirmed the formation of the MIPs in the nanofibers. Furthermore, Raman spectroscopy showed that the crystalline structure of the pristine nylon 6 nanofiber was a kind of α form, and the incorporation of MIPs led to a γ-form structure in the nanofibers; this proved the interactions between nylon 6 and the MIPs. Adsorption studies also confirmed that the adsorption efficiency of BPA onto the molecularly imprinted polymer nanofibers (MIP-NFs; 83.5%) was much greater than that onto nonimprinted polymer nanofibers (NIP-NFs; 36.8%). Also, the imprinting factor was 3.4; this strongly implied the successful formation of molecularly imprinted cavities on the MIP-NFs with a strong affinity to BPA. The maximum adsorption capacity of the MIP-NFs was 103.8 mg/g. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47112.