Novel thermo‐responsive semi‐interpenetrating network microspheres of gellan gum‐poly(N‐isopropylacrylamide) for controlled release of atenolol

Thermoresponsive microspheres of gellan gum‐poly(N‐isopropylacrylamide), i.e., GG‐P(NIPAAm) semi‐interpenetrating polymer networks (semi‐IPNs) have been prepared by ionic crosslinking and used to study the controlled release (CR) of atenolol (ATL), an antihypertensive drug. Interaction of the drug with polymers was studied by Fourier transform infrared (FTIR) spectroscopy. Differential scanning calorimetry (DSC) was used to confirm the polymorphism and molecular level dispersion of ATL. Scanning electron microscopy (SEM) indicated spherical nature and smooth surfaces of the microspheres with some debris attached on their surfaces. Mean particle size measured by laser light diffraction ranged between 34 and 76 μm. Equilibrium swelling performed at 25°C and 37°C in pH 7.4 phosphate buffer exhibited thermoresponsive nature of the polymers. In vitro drug release performed at 25°C and 37°C indicated temperature‐dependency of ATL release, which was extended up to 12 h. In vitro release profiles at both the temperatures confirmed thermoresponsive nature of the polymers giving pulsatile trends. The % cumulative release data have been fitted to an empirical equation to estimate transport parameters and to understand the nature of drug release. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrochemical pretreatment of distillery wastewater using aluminum electrode

Electrochemical (EC) oxidation of distillery wastewater with low (BOD₅/COD) ratio was investigated using aluminum plates as electrodes. The effects of operating parameters such as pH, electrolysis duration, and current density on COD removal were studied. At a current density of 0.03 A cm⁻² and at pH 3, the COD removal was found to be 72.3%. The BOD₅/COD ratio increased from 0.15 to 0.68 for an optimum of 120-min electrolysis duration indicating improvement of biodegradability of wastewater. The maximum anodic efficiency observed was 21.58 kg COD h⁻¹ A⁻¹ m⁻², and the minimum energy consumption observed was 0.084 kWh kg⁻¹ COD. The kinetic study results revealed that reaction rate (k) decreased from 0.011 to 0.0063 min⁻¹ with increase in pH from 3 to 9 while the k value increased from 0.0035 to 0.0102 min⁻¹ with increase in current density from 0.01 to 0.03 A cm⁻². This study showed that the COD reduction is more influenced by the current density. The linear and the nonlinear regression models reveal that the COD reduction is influenced by the applied current density.     

Physicochemical Properties of Garden Cress (<Emphasis Type="Italic">Lepidium sativum</Emphasis> L.) Seed Oil

Garden cress (Lepidium sativum L.) is an edible, underutilised herb, grown mainly for its seeds in India. Physicochemical properties, minor components (unsaponifiable matter, tocopherols, carotenoids), fatty acid composition and storage stability of garden cress seed oil (GCO) were studied. Cold press, solvent and supercritical CO₂ extraction methods were employed to extract the oil. The total oil content of garden cress (GC) seeds was 21.54, 18.15 and 12.60% respectively by solvent, supercritical CO₂ and cold press methods. The physical properties of GCO extracted by the above methods were similar in terms of refractive index, specific gravity and viscosity. However, cold pressed oil showed low PV and FFA compared to the oil extracted by other methods. α-Linolenic acid (34%) was the major fatty acid in GCO followed by oleic (22%), linoleic (11.8%), eicosanoic (12%), palmitic (10.1%) erucic (4.4%), arachidic (3.4%) and stearic acids (2.9%). Oleic acid (39.9%) and α-linolenic acid (42.1%) were the predominant fatty acids at the sn-2 position. The total tocopherol and carotenoid content of GCO was 327.42 and 1.0 μmol/100 g oil, respectively. The oil was stable up to 4 months at 4 °C. Tocopherol and BHT offered the least protection, while ascorbyl palmitate (200 ppm) offered the maximum protection to the oil, when subjected to the accelerated oxidative stability test. Thus GCO can be considered as a fairly stable oil with a high content of α-linolenic acid.     

Conjoint-analysis-based multiattribute optimization: application in acoustical design

The concept of customer preference, or product value, prevalent in economics and management science, is just beginning to be used in engineering design. This concept and the associated measurement approaches offer us a theoretically appealing way to aggregating customer preferences for multiple product attributes into a single objective function, representing total product value, which may then be maximized. Among these methods, conjoint analysis has emerged as the most popular approach in marketing to estimate the value that customers attach to different features of a product that can be at different levels. In this paper, we use conjoint analysis in a novel way to assess a product designer’s preferences for addressing a practical problem in acoustical design. We incorporate a designer’s preferences for reducing noise in a curved pressure vessel excited with broadband noise. The shell is part of a large industrial machine. The “product” here refers to a broadband vibration absorber(s) attached to the structure. Through direct interaction with the design engineer, we elicit his/her preferences for various alternative design configurations and specify an aggregate value function. We then apply optimization techniques, interfaced to simulation codes, to maximize the value function. We show that this method provides more economical designs compared to certain conventional formulations. We conclude by summarizing some limitations to this research, which point to several future research opportunities.     

Electrical behavior of dual‐morphology polyaniline

An attempt was taken to synthesize two types of polyaniline (PANI) with and without solvent followed by drying in air and vacuum oven conditions resulting different morphologies. The PANIs were prepared by chemical oxidative polymerization and studied with respect to their morphological features. Scanning electron microscopy, thermogravimetric analysis, X‐ray diffractometry, Fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy techniques were used for the characterization studies. The PANI synthesized with a solvent had a mixed morphology (fibrillar and granular), whereas PANI synthesized without a solvent had only a granular morphology. The direct‐current electrical conductivities of the samples were evaluated with an electrometer. We observed that the PANIs with mixed morphology (with solvent) were more electrically conducting than those with a single morphology (without solvent). On drying in vacuo, the conductivity of PANI decreased from 3.3 × 10^?2 to 0.3 × 10^?2 S/cm with solvent treatment, whereas it decreased from 0.1 × 10^?2 to 0.3 × 10^?3 S/cm without solvent treatment. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44091.     

Lymphatic Transport of α-Linolenic Acid and Its Conversion to Long Chain n-3 Fatty Acids in Rats Fed Microemulsions of Linseed Oil

In the present study we evaluated the uptake of ALA and its conversion to EPA + DHA in rats given linseed oil (LSO) in native form or as a microemulsion in whey protein or in lipoid. In a single oral dose study in which rats maintained on rodent pellets deficient in ω-3 fatty acids were intubated with 0.35 g LSO in lipoid, the amount of ALA present in lymph was increased reaching a maximum concentration of 16.23 mg/ml at 2.5 h. The amount of ALA present in lymph was increased to a maximum level of 10.95 mg/ml at 4 h in rats given LSO as a microemulsion in whey protein. When LSO was given without emulsification, the amount of ALA present in lymph was found to reach a maximum level of 7.08 mg/ml at 6 h. A similar result was observed when weaning rats were intubated with 0.15 g of LSO per day for a period of 60 days. Higher levels of ALA by 41 and 103 % were observed in lymph lipids of rats given microemulsions of LSO in whey protein and in lipoid respectively as compared to rats given LSO without pre-emulsification. Very little conversion of ALA to EPA and DHA was observed in lymph lipids but higher amounts of EPA + DHA was observed in liver and serum of rats given LSO in microemulsion form. This study indicated that ALA concentration in lymph lipids was increased when LSO was given in microemulsion form in lipoid and further conversion to EPA and DHA was facilitated in liver and serum.     

Distributed fault-tolerant topology control in wireless multi-hop networks

In wireless multi-hop and ad-hoc networks, minimizing power consumption and at the same time maintaining desired properties of the network topology is of prime importance. In this work, we present a distributed algorithm for assigning minimum possible power to all the nodes in a static wireless network such that the resultant network topology is k-connected. In this algorithm, a node collects the location and maximum power information from all nodes in its vicinity, and then adjusts the power of these nodes in such a way that it can reach all of them through k optimal vertex-disjoint paths. The algorithm ensures k-connectivity in the final topology provided the topology induced when all nodes transmit with their maximum power is k-connected. We extend our topology control algorithm from static networks to networks having mobile nodes. We present proof of correctness for our algorithm for both static and mobile scenarios, and through extensive simulation we present its behavior.     

Chemoenzymatic Buta-1,3-diene Synthesis from Syngas Using Biological Decarboxylative Claisen Condensation and Zeolite-Based Dehydration

A method for producing buta-1,3-diene (1,3-BD) by an amalgamation of chemical and biological approaches with syngas as the carbon source is proposed. Syngas is converted to the central intermediate, acetyl-CoA, by microorganisms through a tetrahydrofolate metabolism pathway. Acetyl-CoA is subsequently converted to malonyl-CoA using a carbonyl donor in the presence of a carboxylase enzyme. A decarboxylative Claisen condensation of malonyl-CoA and acetaldehyde ensues in the presence of acyltransferases to form 3-hydroxybutyryl-CoA, which is subsequently reduced by aldehyde reductase to give butane-1,3-diol (1,3-BDO). An ensuing dehydration step converts 1,3-BDO to 1,3-BD in the presence of a chemical dehydrating reagent.