Quality-of-Service Based Protection in MPLS Control WDM Mesh Networks

Intelligent methods for automatic protection and restoration are critical in optical transport mesh networks. This paper discusses the problem of quality-of-service (QoS)-based protection in terms of the protection-switching time and availability for end-to-end lightpaths in a WDM mesh network. We analyze the backup lightpath-sharing problem in such networks and study the correlation of the working lightpaths and the impact of the correlation on the sharing of the backup lightpaths. We present a multi-protocol-label-switching (MPLS) control-based fully distributed algorithm to solve the protection problem. The proposed algorithm includes intelligent and automatic procedures to set up, take down, activate, restore, and manage backup lightpaths. It greatly reduces the required resources for protection by allowing the sharing of network resources by multiple backup lightpaths. At the same time, it guarantees, if possible, to satisfy the availability requirement even with resource sharing by taking the correlation of working lightpaths into consideration. A simple analysis of the proposed algorithm in terms of computation time and message complexity indicates that the implementation of the algorithm is practical. The illustrative studies that compare the performance of 1:1, unlimited sharing, and QoS-based backup sharing algorithms indicate that QoS-based sharing achieves comparable performance as unlimited sharing, which is much better than the 1:1 backup scheme in terms of connection blocking probability, average number of connections in the network for a given offered load, and network resource utilization.     

质子和中子的单粒子效应等效性实验研究

通过实验方法确定了高能质子和中子引起的单粒子效应等效关系，实验中采用金箔散射法降低了质子束流强度，并利用热释光剂量计（TLD）进行质子注量的监测，采用新研制的存储器长线实时监测系统，进行了64K位至4M位的SRAM器件单粒子效应实验，确定了两种粒子引起单粒子效应等效关系。     

Object-oriented query language access to relational databases: A semantic framework for query translation

This research investigates and approach to query processing in a multidatabase system that uses an objectoriented model to capture the semantics of other data models. The object-oriented model is used to construct a global schema, defining an integrated view of the different schemas in the environment. The model is also used as a self-describing model to build a meta-database for storing information about the global schema. A unique aspect of this work is that the object-oriented model is used to describe the different data models of the multidatabase environment, thereby extending the meta database with semantic information about the local schemas. With the global and local schemas all represented in an object-oriented form, structural mappings between the global schema and each local schema are then easily supported. An object algebra then provides a query language for expressing global queries, using the structural mappings to translate object algebra queries into SQL queries over local relational schema. The advantage of using an object algebra is that the object-oriented database can be viewed as a blackboard for temporary storage of local data and for establishing relationships between different databases. The object algebra can be used to directly retrieve temporarily-stored data from the object-oriented database or to transparently retrieve data from local sources using the translation process described in this paper.     

Accurate estimation of environment parameters from ultrasonic data

This paper describes a robust and accurate ultrasonic sensing system for a mobile robot. The system continuously updates a local map of the environment in which obstacles are represented by straight lines or points in a robot centered coordinate frame. The presented algorithms use a Kalman filter for the reduction of the noise in the ultrasonic data and use a systematical error correction (‘bundle correction’) to reduce the uncertainty in obstacle direction. Experiments are carried out in simulation and with a real mobile robot system. Results show that the accuracy with which line parameters can be estimated is in the order of 1 degree for the orientation and about 2 cm for the position. The effect of the bundle correction is significant and maximal when the robot approaches walls under a small angle.     

Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)

A simple micromechanical model based primarily upon the rule-of-mixtures is developed which allows prediction of the effects of fibre preload on the ply stresses (i.e., the initial residual stresses of fibre, adhesive and matrix) induced within VIRALL laminates, and the tensile stress-strain curves and mechanical properties of VIRALL laminates. The analysis of the ply stresses of VIRALL laminates indicates that pre-stressing will dramatically influence the ply stresses. The predicted tensile stress-strain curves of VIRALL laminates are in good agreement with the experimental curves and the results show that the stress-strain curves of VIRALL laminates move upwards when the prestress increases. The predicted tensile mechanical properties of VIRALL laminates at room temperature show good agreement with those obtained experimentally; both show that prestress can improve the tensile properties (i.e., elastic limit strength, 0.2% yield strength and failure strength) of VIRALL laminates.     

New chemical structural features of coal. The structure of coal products

The object of this paper is to demonstrate the usefulness of the transalkylation reaction for determining chemical structural features of products derived from coal. For example, the method is applied to derivatized coals, coals modified by thermolysis, and materials physically or chemically separated from coals. Data are presented for the pyridine soluble and insoluble parts of two coals, an O-methylated coal, a Birch reduced coal, a solvent refined coal, and a coke. Similarities and differences in chemical make-up of these materials are discussed.     

SP预应力空心板在居住建筑中的应用和发展

分析现浇板和传统预制板的特点和弱点，提出发展SP板和SP叠合板是住宅实现大开间、灵活隔断的有效途径之一，也是建筑施工实现现代化的重要内容之一。     

Dependence of critical current density on microstructure and processing of high-Tc superconductors

Microstructural origins for reduced weak-link behavior in high-J_c melt-processed YBCO, spray pyrolyzed thick films of Tl-1223, metallic precursor Y-124 polycrystalline powder-in-tube (PIT) wires and PIT Bi-2212/2223 are discussed. Since the materials studied are the highest J_c, polycrystalline, high-T_c superconductors fabricated worldwide, the results provide important guidelines for further improvements in superconducting properties, thereby enabling practical applications of these materials. It is found that strongly linked current flow within domains of melt-processed 123 occurs effectively through a single crystal path. In c-axis oriented, polycrystalline Tl-1223 thick films, local in-plane texture has been found to play a crucial role in the reduced weak-link behavior. Formation of “colonies” of grains with a common c-axis and modest in-plane misorientation was observed. Furthermore, a colony boundary in general has a varying misorientation along the boundary. Large regions comprised primarily of low angle boundaries were observed. Percolative transport through a network of such small angle boundaries appears to provide the nonweak-linked current path. Although powder-in-tube BSCCO 2212 and 2223 also appear to have a “colony” microstructure, there are some important differences. Colonies in BSCCO consist of stacks of grains with similar c-axis orientation in contrast to colonies in Tl-1223 films where few grains are stacked on top of one another. Furthermore, most grains within a colony in BSCCO have the same lateral dimensions as that of the colony, resulting largely largely in “twist” boundaries. Further microstructural characterization of high-J_c PIT 2212 and 2223 is currently underway. In the case of Y-124 wires, weak macroscopic in-plane texture is found. Additional measurements are underway to determine if a sharper, local in-plane texture also exists. It is found that in three of the four types of superconductors studied, reduced weak-link behavior can be ascribed to some degree of biaxial alignment between grains, either on a “local” or a “global” scale.