A survey of electric and magnetic fields among VDT operators inoffices

The ambient electric and magnetic fields as well as the electromagnetic fields associated with video display terminals (VDTs) at 150 offices are measured. The aim of the study is to determine the general level of the various electromagnetic parameters in offices and establish a technical base for a case referent study of skin symptoms among VDT workers. The median value of the 50-Hz background field in the 150 offices is 0.07 μT. Seven of the offices have background levels higher than 0.5 μT, which is high enough to cause distortion of the picture on the screen. The dominant source for electric fields in the ELF range is electric equipment in the office, not the VDTs. The equivalent surface potential is less than 0.5 kV for 63% of the measured VDTs. The computer monitor is a major source of magnetic fields in the offices. The median value of the magnetic field in the ELF range in front of the VDT is 0.21 μT, and in the VLF range it is 0.03 μT     

Stabilizing effects for the supercritical GaAs n+nn+-transferred electron amplifier

In this paper effects of importance for the stabilization of supercritical n⁺nn⁺ GaAs transferred electron devices are considered. By small-signal impedance calculations and measurements it is shown that doping- as well as temperature gradients of correct polarity reduce the device negative resistance and enhance stability. It is also found that an increasing doping density reduces the negative resistance. Finally it is demonstrated that relaxation effects have a profound influence on the impedance, and that such effects have to be included in a small-signal analysis in order to give reasonable agreement with measurements.     

An energy condition for initiation of interfacial microcracks at inclusions

Fracture mechanics is applied to the problem of microcrack initiation on cylindrical (spherical) particles in a matrix. The numerical calculations have been performed by the finite element method.A stress criterion for the initiation of interfacial, cap shaped, microcracks is derived as function of inclusion size and bonding strength. It is found that the cracks are unstable below a minimum “cap angle”. Comparison with experiments shows reasonable quantitative agreement.     

PFVIBAT—a computer program for plane frame vibration analysis by an exact method

The described program PFVIBAT uses the exact displacement method to perform free and forced vibration analysis entirely within the differential equation theory of beams thus avoiding assumed modes and lumped masses. The frame may contain rigid bodies. Clamped, hinged, guided and rolling connections are allowed for. Consideration of rotatory inertia, shear deformation and second-order bending moments and shear forces as caused by static axial load is optional. Eigenfrequencies and modal masses are calculated with an accuracy that may be specified. Displacement and moment modes are plotted. Transient vibrations are studied.     

Isotopic variations of Zn in biological materials

Variations in the isotopic composition of Zn present in various biological materials were determined using high-resolution multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), following digestion and purification by anion exchange chromatography. To correct for differences in instrumental mass discrimination effects between samples and standards, Cu was employed as an elemental spike. Complementary analyses of Zn separates by sector field ICPMS instruments revealed that the concentrations of the majority of potentially interfering elements were reduced to negligible levels. Residual spectral interferences resulting from (35)Cl(16)O(2)(+), (40)Ar(14)N(2)(+), and (40)Ar(14)N(16)O(+) could be instrumentally resolved from the (67)Zn, (68)Zn, and (70)Zn ion beams, respectively, during measurement by MC-ICPMS. The only other observed interference in the Cu and Zn mass range that could not be effectively eliminated by high-resolution multicollection resulted from (35)Cl(2)(+), necessitating modification of the sample preparation procedure to allow accurate (70)Zn detection. Complete duplication of the entire analytical procedure for human whole blood and hair, as well as bovine liver and muscle, provided an external reproducibility of 0.05-0.12 per thousand (2sigma) for measured delta(66/64)Zn, delta(67/64)Zn, and delta(68/64)Zn values, demonstrating the utility of the method for the precise isotopic analysis of Zn in biological materials. Relative to the selected Zn isotopic standard, delta(66/64)Zn values for biological samples varied from -0.60 per thousand in human hair to +0.56 per thousand in human whole blood, identifying the former material as the isotopically lightest Zn source found in nature to date.     

Isotopic fractionation during diffusion of transition metal ions in solution

Isotope ratios and elemental concentrations were measured in aqueous solutions sampled at varying distances from sources of Fe or Zn ions. The measurements reveal fractionation of isotopes resulting from pure diffusion in solution. Our data demonstrate that diffusion alone can cause changes in (56)Fe/(54)Fe and (66)Zn/(64)Zn isotope ratios in excess of -0.3 per thousand. These findings thus confirm previous suspicions that transport processes contribute to observed variations in isotopic compositions. Diffusion must therefore be considered when attempting to make inferences from isotope measurements on samples originating from aqueous systems where concentration gradients may develop.     

The order of any stabilizing regulator is sufficient a priori information for adaptive stabilization

Let the unknown linear system , be given, together with the a priori information that for a known, nonnegative integer l, there is a (nonadaptive) regulator of order l which stabilizes the system. It is shown that this suffices as a priori information for an adaptive stabilizing controller. An example of such an algorithm is given. This yields a continuous regulator, which does not utilize probing signals. It is based on a dense search through parameter space, and does not utilize high-gain properties, as opposed to the ‘universal regulators’ proposed before [3–6]. In the absence of information of such an l, it is shown how to modify the algorithm to search over the regulator structures, i.e. the controller's dimension.     

Accuracy in multiangle light scattering measurements for molar mass and radius estimations. Model calculations and experiments

Multiangle light scattering (MALS) is a well-established technique used to determine the size of macromolecules and particles. In this study, different extrapolation procedures used in MALS were investigated with regard to accuracy and robustness in the obtained molar mass and rms radius. Three different mathematical transformations of the light scattering function referred to as the Debye, Zimm, and Berry methods for constructing the Debye plot were investigated for two idealized polymer shapes, homogeneous spheres and random coils, with radii from 25 to 250 nm. The effect of the angular interval used for the extrapolation was investigated, as was the robustness of the different transformations toward errors in the measured light scattering intensity at low angles. For an rms radius less than 50 nm, the relative error in molar mass due to extrapolation was less than 1% independent of the method used. For larger radii, the error increased and the extrapolation procedure became more critical. For random coil polymers, the Berry method was superior in terms of accuracy and robustness. For spheres, the Debye method was superior. The Zimm method was inferior to the others. The different extrapolation methods were evaluated and compared on experimental data from a size exclusion chromatography-MALS analysis of an ultrahigh molar mass poly(ethylene oxide) (PEO). The PEO data qualitatively verified the calculations and stressed the importance of optimizing the extrapolation procedure after careful evaluation of the experimental data. A discussion of how to detect erroneous data in an experimental Debye plot is given.     

Molar volumes of Al,Li, Mg and Si

The molar volumes of the fcc, bcc, hcp and liquid phases of Al, Li, Mg and Si as well as diamond Si have been evaluated as functions of temperature based on experimental data from the literature. The molar volume of each element in each structure is described by a single polynomial expression as a function of temperature. These polynomials can be used above around 150 K. The molar volumes of the liquids were described by a linear temperature dependence. The molar volumes of nonstable structures were evaluated with the help of lattice parameter measurements of the corresponding solid solutions. A large majority of the solid solutions studied showed negative excess volumes. The molar volumes of the relatively closely packed fcc, bcc and hcp structures were always found to be very close to each other, and a reasonably good approximation would be to set them as equal.     

Developing control logic using aspect-oriented programming and sequence planning

A fundamental functionality of a Programmable Logic Controller (PLC) is to control and execute a set of operations. But a large part of the program code is more involved in supporting the user with concerns like alarm, HMI, communication, safety and manual control. Code related to these supporting concerns is often tangled with operation execution code, the core concerns, which makes it hard to reuse.This paper describes a method to reuse code and functionality when developing PLC programs and code libraries. The method proposes that core concerns are planned with a software tool called Sequence Planner, and the supporting concerns are integrated into the core concerns with a tool based on aspect-oriented programming.