Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004     

MET𝔸P: revisiting Privacy-Preserving Data Publishing using secure devices

The goal of Privacy-Preserving Data Publishing (PPDP) is to generate a sanitized (i.e. harmless) view of sensitive personal data (e.g. a health survey), to be released to some agencies or simply the public. However, traditional PPDP practices all make the assumption that the process is run on a trusted central server. In this article, we argue that the trust assumption on the central server is far too strong. We propose Met _??P, a generic fully distributed protocol, to execute various forms of PPDP algorithms on an asymmetric architecture composed of low power secure devices and a powerful but untrusted infrastructure. We show that this protocol is both correct and secure against honest-but-curious or malicious adversaries. Finally, we provide an experimental validation showing that this protocol can support PPDP processes scaling up to nation-wide surveys.     

Formation of water-resistant hyaluronic acid nanofibers by blowing-assisted electro-spinning and non-toxic post treatments

A unique blowing-assisted electro-spinning process has been demonstrated recently to fabricate hyaluronic acid (HA) nanofibers. In this article, effects of various experimental parameters, such as air-blowing rate, HA concentration, feeding rate of HA solution, applied electric field, and type of collector on the performance of blowing-assisted electro-spinning of HA solution were investigated. With the assistance of air-blowing, the solution-feeding rate could be increased to 40 μl/min/spinneret and the applied electric field could be decreased to 2.5 kV/cm. The optimum conditions for consistent fabrication of HA (with a molecular weight of ∼3.5 million) nanofibers involved the use of an air-blowing rate of around 70 ft³/h and a concentration range between 2.5 and 2.7% (w/v) in aqueous solution. Two benign methods to fabricate water-resistant HA nanofibrous membranes without the use of reactive chemical agents were demonstrated: (a) the exposure of HA membranes in hydrochloric acid (HCl) vapor, followed by a freezing treatment at −20 °C for 20-40 days; and (b) the immersion of HA membranes in an acidic mixture of ethanol/HCl/H₂O at 4 °C for 1-2 days. Although both methods could produce hydrophilic, substantially water-resistant HA nanofibrous membranes (the treated membranes could keep their shape intact in neutral water at 25 °C for about 1 week), the immersion method (6) was shown to be more versatile and effective. IR spectroscopy was used to investigate this ‘cross-linking’ mechanism in the solid HA membrane. Viscosity studies of acidic HA solutions under varying freezing conditions were also carried out. It was found that when the freezing time exceeded 8 h, the HA solution became gel-like and exhibited a large increase in the hydrogen-bond concentration. Thus, the resistance to water solubility could be due to the high density of hydrogen bonds in the solid HA membranes that were treated by the ‘freezing’ approach.     

AN ITERATIVE FILTERING ALGORITHM FOR NON-FOURIER FREQUENCY ESTIMATION

Abstract. We study an iterative filtering method to estimate frequencies of random Gaussian sinusoids in white noise. The method uses higher order crossings and takes advantage of a fixed point to guide the use of bandpass filtering in an attempt effectively to increase the signal-to-noise ratio. At each iteration the expected zero-crossing rate is estimated from independent time series. Convergence occurs with any prespecified probability less than one.     

Effect of Water Vapor on the Release of Fission Gases from Uranium Oxycarbide in High-Temperature, Gas-Cooled Reactor Coated Fuel Particles

The hydrolysis of uranium oxycarbide (UCO) was studied by injecting water vapor into a fuel element containing a known number of high-temperature, gas-cooled reactor (HTGR) coated particles with exposed fuel kernels. The experiments were conducted in the High Flux Isotope Reactor (HFIR) at temperatures between 700° and 1000°C, a system pressure of 200 kPa, and partial pressures of water vapor between 21 and 199 Pa. The general sequential response of the exposed fuel kernels to water vapor addition consisted of (1) a rapid release of stored fission gas with a concomitant increase in the steady-state release and (2) a period of constant steady-state release. Upon cessation of the addition of water vapor, a decline in the release to prehydrolysis values generally occurred. The release of stored fission gas was dependent on the square of the partial pressure of water vapor. The ratio of the constant steady-state release to the prehydrolysis value was independent of the partial pressure of water vapor. The time constant for the decline in the release was the same in all of the hydrolysis tests.     

Self-assembly and crystallization behavior of a double-crystalline polyethylene-block-poly(ethylene oxide) diblock copolymer

The self-assembly and crystallization behavior of a well-defined low molecular weight polyethylene-block-poly(ethylene oxide) (PE-b-PEO) diblock copolymer was studied. The number-average degrees of polymerization for the PE and PEO blocks were 29 and 20, respectively. The molecular weight distribution was 1.04 as determined by size-exclusion chromatography. The PE-b-PEO sample exhibited two melting points at 28.7 and 97.4 °C for the PEO and the PE crystals, respectively. The crystallization of the PE blocks was unconfined, while the crystallization of the PEO blocks was confined between pre-existing PE crystalline lamellae, as demonstrated by simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) studies. In the fully crystalline state, both PE and PEO blocks formed extended-chain crystals with PE chains tilted ∼22° from the lamellar normal and PEO chains parallel to the lamellar normal, as evidenced by two-dimensional WAXD study of shear-oriented samples. Regardless of hydrogen bonding among hydroxyl chain ends in the PEO blocks, interdigitated, single-crystalline layer morphology was observed for both PE and PEO crystals. The partial crystalline morphology, where the PE crystallizes and the PEO is amorphous, had the same overall d-spacing as the fully crystalline morphology. A double-amorphous PEO layer sandwiched between neighboring PE crystalline layers was deduced based on a chain conformation study using Fourier transform infrared. The confined crystallization kinetics for PEO blocks was investigated by differential scanning calorimetry, which could be explained by a heterogeneous nucleation mechanism. The slower crystallization rate in the PEO-block than the same molecular weight homopolymer was attributed to the effects of nanoconfinement and PEO chains tethered to the PE crystals.     

Playing Mastermind with Constant-Size Memory

We analyze the classic board game of Mastermind with n holes and a constant number of colors. The classic result of Chvátal (Combinatorica 3:325–329, 1983) states that the codebreaker can find the secret code with Θ(n/logn) questions. We show that this bound remains valid if the codebreaker may only store a constant number of guesses and answers. In addition to an intrinsic interest in this question, our result also disproves a conjecture of Droste, Jansen, and Wegener (Theory Comput. Syst. 39:525–544, 2006) on the memory-restricted black-box complexity of the OneMax function class.     

A conformance test suite for TTCN-3 tools

With more than 10 years of maturing through industrial use and standardization, the Testing and Test Control Notation (TTCN-3) has become a widely used technology that many businesses depend upon for ensuring their product quality. With the rising number of supporters and tools, the demand for a means to assess the standards compliance of TTCN-3 tools has increased. In this article, we describe the motivation, approach, methodology, and results of the still ongoing project to develop a standardized conformance test suite for TTCN-3 tools. We discuss the challenges involved in creating such a test suite, the way to deal with imposed resource limitations of the project, and where we think the effort is heading.     

On detecting co-resident cloud instances using network flow watermarking techniques

Virtualization is the cornerstone of the developing third-party compute industry, allowing cloud providers to instantiate multiple virtual machines (VMs) on a single set of physical resources. Customers utilize cloud resources alongside unknown and untrusted parties, creating the co-resident threat—unless perfect isolation is provided by the virtual hypervisor, there exists the possibility for unauthorized access to sensitive customer information through the exploitation of covert side channels. This paper presents co-resident watermarking, a traffic analysis attack that allows a malicious co-resident VM to inject a watermark signature into the network flow of a target instance. This watermark can be used to exfiltrate and broadcast co-residency data from the physical machine, compromising isolation without reliance on internal side channels. As a result, our approach is difficult to defend against without costly underutilization of the physical machine. We evaluate co-resident watermarkingunder a large variety of conditions, system loads and hardware configurations, from a local laboratory environment to production cloud environments (Futuregrid and the University of Oregon’s ACISS). We demonstrate the ability to initiate a covert channel of 4 bits per second, and we can confirm co-residency with a target VM instance in $<$ 10 s. We also show that passive load measurement of the target and subsequent behavior profiling is possible with this attack. We go on to consider the detectability of co-resident watermarking, extending our scheme to create a subtler watermarking attack by imitating legitimate cloud customer behavior. Our investigation demonstrates the need for the careful design of hardware to be used in the cloud.     

Vapor-liquid equilibria in the argon-methane system

Vapor-liquid equilibrium compositions have been measured for the argon-methane system at 115.2°, 123.4° and 137.1°K, by means of a forced-recirculation apparatus. A modified Redlich-Kwong equation of state with the incorporation of a binary interaction constant has been successfully employed to represent the data. Liquid activity coefficients have been evaluated and correlated.