Recovery of chromium from tannery effluents using a redox–adsorption approach

Adsorption isotherms for sodium and trivalent chromium uptake from aqueous solutions onto Amberlite resin were prepared at 18°C. Adsorption of each cation followed the Langmuir model. The rate of uptake of each cation was found to be film diffusion controlled with sodium showing the most rapid uptake. In aqueous solutions containing both chromium and sodium as the only cationic species, it was found that with increasing initial concentration of sodium, the trivalent chromium uptake on the resin decreased substantially. To overcome this difficulty a four step redox–adsorption system has been developed for the removal of Cr³⁺ from tannery effluents. The first step comprises the oxidation of trivalent chromium to the hexavalent form using selected common oxidising agents. The liquid effluent is then passed through an Amberlite cation-exchange resin in step 2 where the sodium in the waste stream is completely removed. The anionic hexavalent form of chromium (Cr₂O) passes unaltered through the resin along with the waste stream. In the third stage the dichromate is reduced back to the trivalent cationic form which is subsequently removed from the waste stream by a second Amberlite ion-exchange bed in stage 4. Each step in this process is assessed in batch and flow mode using simulated and real tannery effluents.     

The influence of porcine growth hormone on muscle fibre characteristics, metabolic potential and meat quality

Treatment of lean female pigs with porcine growth hormone (placebo or 80 μg pGH per kg body weight per day) for 6 weeks from 50 kg to 86 kg body weight did not change the frequency and the percentage area of muscle fibre types (ST, FTa and FTb fibres) and muscle capillarity of M. longissimus dorsi, M. gluteus medius and M. psoas major. The mean fibre cross-sectional area increased 5·3%, albeit nonsignificantly, corresponding to a 6·6% increase in carcass meat. The muscles contained slightly less dry matter and protein, and the lipid content of M. longissimus dorsi decreased 19% after pGH treatment. In the backfat the fatty acid composition changed towards a higher ratio of polyunsaturated to saturated fatty acids. The pH_u of M. longissimus dorsi was unaltered, while the pH₄₅ was reduced by pGH. The muscle glycogen level and the activity of lactate dehydrogenase (LDH), citrate synthetase (CS), and 3-OH-acyl-CoA-dehydrogenase (HAD) of M. longissimus dorsi were unchanged by pGH. The haem pigment, shear force, sarcomere length and eating quality of loin chops, were unaffected by pGH treatment. The results show that pGH treatment did not change the muscle characteristics in a way that affects the meat quality of M. longissimus dorsi in lean female pigs.     

A rigorous comparison of the Ewald method and the fast multipole method in two dimensions

The most efficient and proper standard method for simulating charged or dipolar systems is the Ewald method, which asymptotically scales as where N is the number of charges. However, recently the “fast multipole method” (FMM) which scales linearly with N has been developed. The break-even of the two methods (that is, the value of N below which Ewald is faster and above which FMM is faster) is very sensitive to the way the methods are optimized and implemented and to the required simulation accuracy.In this paper we use theoretical estimates and simulation results for the accuracies to carefully compare the two methods with respect to speed. We have developed and implemented highly efficient algorithms for both methods for a serial computer (a SPARCstation ELC) as well as a parallel computer (a T800 transputer based MEIKO computer). Breakevens in the range between N = 10 000 and N = 30 000 were found for reasonable values of the average accuracies found in our simulations. Furthermore, we illustrate how huge but rare single charge pair errors in the FMM inflate the error for some of the charges.     

Building a speech recognition system with privacy identification information based on Google Voice for social robots

The Journal of Supercomputing - Currently, many smart speakers, even social robots, appear on the market to help people's lives become more convenient. Usually, people use smart speakers to...     

High Figure of Merit (FOM) of Bragg Modes in Au‐Coated Nanodisk Arrays for Plasmonic Sensing

Gold‐coated nanodisk arrays of nearly micron periodicity are reported that have high figure of merit (FOM) and sensitivity necessary for plasmonic refractometric sensing, with the added benefit of suitability for surface‐enhanced Raman scattering (SERS), large‐scale microfabrication using standard photolithographic techniques and a simple instrumental setup. Gold nanodisk arrays are covered with a gold layer to excite the Bragg modes (BM), which are the propagative surface plasmons localized by the diffraction from the disk array. This generates surface‐guided modes, localized as standing waves, leading to highly confined fields confirmed by a mapping of the SERS intensity and numerical simulations with 3D finite element method. The optimal gold‐coated nanodisk arrays are applied for refractometric sensing in transmission spectroscopy with better performance than nanohole arrays and they are integrated to a 96‐well plate reader for detection of IgY proteins in the nanometer range in PBS. The potential for sensing in biofluids is assessed with IgG detection in 1:1 diluted urine. The structure exhibits a high FOM of up to 46, exceeding the FOM of structures supporting surface plasmon polaritons and comparable to more complex nanostructures, demonstrating that subwavelength features are not necessary for high‐performance plasmonic sensing.     

Bioinspired Nacre‐Like Ceramic with Nickel Inclusions Fabricated by Electroless Plating and Spark Plasma Sintering

Hybrid composites of layered brittle‐ductile constituents assembled in a brick‐and‐mortar architecture are promising for applications requiring high strength and toughness. Mostly, polymer mortars have been considered as the ductile layer in brick‐and‐mortar composites. However, low stiffness of polymers does not efficiently transfer the shear between hard ceramic bricks. Theoretical models point to metals as a more efficient mortar layer. However, infiltration of metals into ceramic scaffold is non‐trivial, given the low wetting between metals and ceramics. The authors report on an alternative approach to fabricate brick‐and‐mortar ceramic‐metal composites by using electroless plating of nickel (Ni) on alumina micro‐platelets, in which Ni‐coated micro‐platelets are subsequently aligned by a magnetic field, taking advantage of ferromagnetic properties of Ni. The assembled Ni‐coated ceramic scaffold is then sintered using spark plasma sintering (SPS) to locally create Ni mortar layers between ceramic platelets, as well as to sinter the ceramic micro‐platelets. The authors report on materials and mechanical properties of the fabricated composite. The results show that this approach is promising toward development of bioinspired ceramic‐metal composites.