Great enhancement of mechanical features in PLA based composites containing aligned few layer graphene (FLG), the effect of FLG loading,size, and dispersion on mechanical and thermal properties

Four series of polylactide (PLA) based composite films containing horizontally aligned few layer graphene (FLG) flakes of high aspect ratio and adsorbed albumin are prepared. The mechanical and thermal properties varies with percentage, dispersion degree and size of FLG flakes. Great improvement up to 290% and 360% of tensile modulus and strength respectively were obtained for the composite containing high lateral size of FLG at 0.17% wt, and up to 60% and 80% for the composite with very well dispersed 0.02% wt FLG. The composites of PLA and PEG-PLLA containing very well dispersed FLG flakes at 0.07% wt are ductile showing enhancement of elongation at break up to respectively 80% and 88%. Relatively high electrical conductivity, 5 × 10⁻³ S/cm, is measured for PLA film charged with 3% of FLG.     

Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

Modification of emission wavelength in organic random lasers based on photonic glass

Control of the emission wavelength of a random laser (RL) system over a 7-nm waveband is demonstrated using a green-emitting π-conjugated polymer infiltrated into a photonic glass formed by nano/micro-size monodisperse silica spheres. The use of a solution-based conjugated polymer enables the complete filling of the voids within the photonic glass without suffering from quenching and the gain can therefore be maximized. The emission wavelength of these structures is set by a combination of the material system spectral gain and of the transport mean free path, the latter being controlled by the mean diameter of the spheres in the nano-scale range. Transport mean free paths of photons in the RL’s active region are calculated using Mie scattering theory and corroborated with coherent backscattering measurements. Further wavelength modification is also possible by changing the pump spot size and the pump fluence.     

Improving the transfer of near infrared prediction models by orthogonal methods

Eight calibration transfer methods based on the removal of orthogonal signal were compared for the standardization of whole soybean protein and oil models. Dynamic orthogonal projection (DOP), transfer by orthogonal projection (TOP), error removal by orthogonal subtraction (EROS), orthogonal signal correction (OSC), and orthogonal projections to latent structures (O-PLS) as well as the modification and extension of some of these methods were compared in the transfer of models in intra and inter-brand situations using two Foss Infratecs and two Bruins OmegAnalyzerGs. For each brand, a master was designated and its models transferred onto the second unit of its network and the two units of the second brand. Calibration models were transferable from brand to brand with similar or better precision than when each instrument was calibrated on its own calibration set (for Infratec 1229, the relative predictive determinant (RPD) increased in intra and inter-brand calibration transfer situations from 10.42 to 11.45 and 10.57, with DOP and EROS respectively). Performance of each method was different across parameters, instruments, and validation sets. DOP modifications on the determination of the difference matrix showed promising results while TOP and EROS extensions to include variability specifically present in certain crop years did not bring any beneficial effects.     

Real options and technology management: Assessing technology migration options in wireless industry

The wireless industry is currently undergoing a major transition from second generation (2G) to third generation (3G) wireless technologies. The paper attempts to assess wireless technology migration options using the real options approach (ROA) to support the wireless network operators’ strategic decisions: to migrate or not, if so, which migration path to take. The preliminary result shows that the evolution of wireless network technologies between generations is desirable, but not within generations. Finally, from a strategic perspective, we should consider the possible challenges that may hinder migration. By identifying these challenges, we can be more watchful of transition pitfalls and can choose a better alternative.     

High-temperature coupling of high-speed GPC with continuous viscometry. II. Ethylene–vinyl acetate copolymers

An application of the high temperature coupling of a gel permeation chromatograph with a home-made continuous viscometric detector is described. It concerns the comprehensive characterization of ethylene–vinyl acetate copolymers. Suitable chromatographic conditions are chosen to enable a correct use of the universal calibration concept. Through analysis of poly(vinyl acetate) fractions and commercial polyethylene samples, a comparison is made with the results of classical measurements. Average molecular weights as well as intrinsic viscosity appear to be in good agreement within experimental error, which proves the system for the characterization of random ethylene–vinyl acetate copolymers. In attempting to obtain a reliable estimate of long chain branching frequency λ, a series of commercial samples has been selected, with the vinyl acetate weight fraction within the range 0–45%. As a rule, experimental viscosity law exhibits two parts, a straight line with a Mark–Houwink exponent 0.7 in the low molecular weight region and a curvature, well smoothed by a third-degree polynomial regression. Consequently, long chain branching does not appear before a limiting molecular weight of about 50,000. Beyond this limit, λ is 0.5 × 10^?4, with no dependence on molecular weight, which resembles low density polyethylene.     

Development and numerical validation of a new model for walls with phase change materials implemented in TRNSYS

This paper presents a model of a wall with variable properties dedicated to modelling phase change materials (PCMs) in building envelopes. The model is implemented in the TRNSYS simulation tool and referred to as Type 3258. The 1-D conduction heat transfer equation is solved using an explicit finite-difference method coupled with an enthalpy method to consider the variable PCM thermal capacity. This model includes temperature-dependent thermal conductivity and PCM-specific effects like hysteresis and supercooling. The stability conditions are discussed and the algorithm implemented in TRNSYS is described. A numerical validation performed on wall test cases proposed by the International Energy Agency is presented, showing that the developed model is in agreement with reference models. The paper also discusses the impact of temporal and spatial discretization on the model performance. Modelling problems encountered when using an effective heat capacity method (compared to an enthalpy method) and when representing supercooling are also discussed.     

Effect of pH and Temperature on the Viscosity of Texturized and Commercial Whey Protein Dispersions

Apparent viscosity (η_a) of texturized whey protein concentrate (tWPC80) produced using supercritical fluid extrusion process was compared with commercial WPC-80 as a function of pH (3.0 to 9.0) and heating temperatures (25 to 80°C). The tWPC80 exhibited shear thinning behavior and yielded 2 to 10-folds higher η_a than commercial WPC-80 at all pH and temperatures studied. The η_a of tWPC80 decreased as pH was increased from 3.0 to 9.0. The η_a of both samples was always higher at pH 3.0 than at pH 7.0 due to acid-induced aggregation in the former. The ability of the tWPC80 to perform as a food thickening agent was also compared with other commercial thickeners. The tWPC80 offers as a desirable ingredient for many food formulations currently utilizing starches and polysaccharides as texture modifying agents.