N-Type Field-Effect Transistors Using Multiple Mg-Doped ZnO Nanorods

Nanorod field-effect transistors (FETs) that use multiple Mg-doped ZnO nanorods and a SiO₂ gate insulator were fabricated and characterized. The use of multiple nanorods provides higher on-currents without significant degradation in threshold voltage shift and subthreshold slopes. It has been observed that the on-currents of the multiple ZnO nanorod FETs increase approximately linearly with the number of nanorods, with on-currents of ~1 muA per nanorod and little change in off-current (~4times10^-12). The subthreshold slopes and on-off ratios typically improve as the number of nanorods within the device channel is increased, reflecting good uniformity of properties from nanorod to nanorod. It is expected that Mg dopants contribute to high n-type semiconductor characteristics during ZnO nanorod growth. For comparison, nonintentionally doped ZnO nanorod FETs are fabricated, and show low conductivity to compare with Mg-doped ZnO nanorods. In addition, temperature-dependent current-voltage characteristics of single ZnO nanorod FETs indicate that the activation energy of the drain current is very low (0.05-0.16 eV) at gate voltages both above and below threshold     

25mm厚钢板产生层间撕裂的原因和防治

层间撕裂并非是厚板独有的质量问题 ,结合工程实例 ,分析 2 5mm厚低合金钢板产生层间撕裂的原因。通过对钢材的超声波探伤检测、化学成分分析和Z向性能检测 ,指出层间撕裂主要与节点设计不当和钢材内非金属夹杂物偏析、分层有关 ,并提出了预防措施。对产生裂纹的构件视严重情况提出了不同的修补处理方法     

钢锭零能少氧化均热轧制的研究

根据计算机的辅助分析,采用新的钢锭传搁、注后强制水冷却、垫铁脱模等工艺后,入炉钢锭的热焓已超过开坯轧制需要,利用普通均热炉代替钢锭保温车,可完全依靠到钢锭自身潜热与显热进行均热。对不同锭型与钢种采用经试验的最佳时间均热后再轧制,收与保温车均热钢锭直接轧制相同的效果。     

An ethical analysis of student-faculty interactions

Senior nursing students described their interactions with faculty in a journal writing assignment. These interactions were categorized by the ethical perspectives of justice, autonomy, beneficence, and caring. An ethical analysis of faculty-student interactions is a strategy that may help nursing faculty and students understand differing perceptions about their relationships.     

高压高产井电子压力计直读试井应注意的几个问题

在高压高产井电子压力计直读试井中，推荐选用石英作为压力传感器的压力计，附加适量的加重杆，保证压力计顺利入井，并平稳工作；同时选用可靠的井口防喷系统。     

分流液压转向牵引计算的展开图及其应用

本文论及分流液压转向牵引计算的概念,方法及其展开图,并且提供了计算机绘制的展开图和应用实例。     

Pseudorandomness of Basic Structures in the Block Cipher KASUMI

The notion of pseudorandomness is the theoretical foundation on which to consider the soundness of a basic structure used in some block ciphers. We examine the pseudorandomness of the block cipher KASUMI, which will be used in the next‐generation cellular phones. First, we prove that the four‐round unbalanced MISTY‐type transformation is pseudorandom in order to illustrate the pseudorandomness of the inside round function FI of KASUMI under an adaptive distinguisher model. Second, we show that the three‐round KASUMI‐like structure is not pseudorandom but the four‐round KASUMI‐like structure is pseudorandom under a non‐adaptive distinguisher model.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Error Concealment Based on Semantic Prioritization with Hardware‐Based Face Tracking

With video compression standards such as MPEG‐4, a transmission error happens in a video‐packet basis, rather than in a macroblock basis. In this context, we propose a semantic error prioritization method that determines the size of a video packet based on the importance of its contents. A video packet length is made to be short for an important area such as a facial area in order to reduce the possibility of error accumulation. To facilitate the semantic error prioritization, an efficient hardware algorithm for face tracking is proposed. The increase of hardware complexity is minimal because a motion estimation engine is efficiently re‐used for face tracking. Experimental results demonstrate that the facial area is well protected with the proposed scheme.     

疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。