Applications of cumulants to array processing .I. Apertureextension and array calibration

An interpretation for the use of cumulants in narrowband array processing problems is proposed. It is shown how fourth-order cumulants of multichannel observations increase the directional information compared with second-order statistics. Based on the interpretation, it is shown how cumulants can be used to increase the effective aperture of an arbitrary antenna array. The amount of partial information necessary to jointly calibrate an arbitrary array and estimate the directions of far-field sources is also investigated. It is proven that the presence of a doublet and use of fourth-order cumulants is sufficient to accomplish this task. The proposed approach is computationally efficient and more general than covariance-based algorithms that have addressed the calibration problem under constraints. A class of beamforming techniques is proposed to recover the source waveforms. Proposed estimation procedures are based on cumulants, which bring insensitivity to the spatial correlation structure of additive Gaussian measurement noise. Simulations are provided to illustrate the use of the proposed algorithms     

The influence of multiple goals on driving behavior: the case of safety, time saving, and fuel saving

Due to the innate complexity of the task drivers have to manage multiple goals while driving and the importance of certain goals may vary over time leading to priority being given to different goals depending on the circumstances. This study aimed to investigate drivers’ behavioral regulation while managing multiple goals during driving. To do so participants drove on urban and rural roads in a driving simulator while trying to manage fuel saving and time saving goals, besides the safety goals that are always present during driving. A between-subjects design was used with one group of drivers managing two goals (safety and fuel saving) and another group managing three goals (safety, fuel saving, and time saving) while driving. Participants were provided continuous feedback on the fuel saving goal via a meter on the dashboard. The results indicate that even when a fuel saving or time saving goal is salient, safety goals are still given highest priority when interactions with other road users take place and when interacting with a traffic light. Additionally, performance on the fuel saving goal diminished for the group that had to manage fuel saving and time saving together. The theoretical implications for a goal hierarchy in driving tasks and practical implications for eco-driving are discussed.     

Studies of polymerization of acrylic monomers using luminescence probes and differential scanning calorimetry

A fiber optic system has been designed to couple calorimeter and fluorimeter equipment for in situ monitoring of polymerization reactions by both techniques simultaneously. Two acrylic monomers (cyclohexyl methacrylate, CHM, and 2-ethylhexyl acrylate, EHA) were studied at different temperatures. Pyrene (Py) was employed at a low concentration (≤10^?4 mol/L) as a fluorescence probe. The emission spectrum of pyrene shows a broad band peaking at 390 nm, whose intensity grows with polymerization progress. A correlation with conversion degree could be established by collecting fluorescence intensity through the optical fiber at different polymerization times. For the more flexible polymer formed, poly(ethylhexyl acrylate) (PEHA), Py emission sharply increases only when high conversions are reached and continues increasing for a long time after the limiting conversion is attained. For CHM polymerizations, S-shaped curves are found. Isochronal plots of intensity vs. scaled conversion allow elaboration of master curves for the peak emission. Data at 50°C for CHM cannot be fitted to the master curve, and this is explained in terms of vitrification.     

Intermodulation Distortion in CMOS Attenuators and Switches

Gain control elements are widely used in communication systems both to limit the incident power to the circuitry and to control the amplitude of the transmitted signal. Attenuators are one way of controlling the signal amplitude. The distortion performance of common CMOS attenuator topologies is investigated in this work. CMOS device equations that model the device in different regions of operation and which also model short channel effects are used for calculating distortion performance. Calculated distortion is compared with simulation results and experimental data, and qualitative explanations of the distortion curves as well as the deviation between different sources of data are given. Potential improvements in linearity performance of attenuators via circuit design techniques have also been discussed     

Phonon Dispersion Measurements of YBa2Cu3O6.15 and YBa2Cu3O6.95 by Time-of-Flight Neutron Spectroscopy

We measured the phonon dispersions of YBa₂Cu₃O_6.15 and YBa₂Cu₃O_6.95 by time-of-flight inelastic neutron scattering. The in-plane bond-stretching modes in the metallic phase showed a distinct a-b plane anisotropy beyond what is expected for structural origin. Such anisotropy in the longitudinal optical modes, which is absent in the TO, suggests strong in-plane anisotropy in the underlying electronic structure. Apical oxygen bond-stretching modes showed a large frequency change between the insulating and the metallic phases. This large softening also is beyond structural origin, and suggests the effect of local electronic environment.     

Evaluation of the fracture toughness of hot-rolled low-alloy Ti-V plate steel

The effects of varying finish rolling temperature (FRT) and cooling rate on the mechanical properties of hot rolled plates of an experimental low-alloy Ti-V steel were studied. Fracture toughness was evaluated for various types of specimens at slow and high deformation rates. However, the transition temperatures determined by the various tests do not always correlate. Therefore, it is recommended that fracture toughness be evaluated by both static and dynamic testing. Following a low cooling rate, the best plate properties are obtained at the lowest FRT in the austenite-ferrite range, although occurrence of delaminations at this temperature may be detrimental for specific applications. Higher cooling rates produce higher strength but lower toughness than lower cooling rates in plates with the same FRT.     

Thermomechanical processing of microalloyed powder forged steels and a cast vanadium steel

The effects of controlled rolling on transformation behavior of two powder forged (P/F) microalloyed vanadium steels and a cast microalloyed vanadium steel were investigated. Rolling was carried out in the austenitic range below the recrystallization temperature. Equiaxed grain structures were produced in specimens subjected to different reductions and different cooling rates. The ferrite grain size decreased with increasing deformation and cooling rate. Ferrite nucleated on second phase particles, deformation bands, and on elongated prior austenite grain boundaries; consequently a high fractional ferrite refinement was achieved. Deformation raised the ferrite transformation start temperature while the time to transformation from the roll finish temperature decreased. Cooling rates in the cast steel were higher than in P/F steels for all four cooling media used, and the transformation start temperatures of cast steels were lower than that of P/F steel. Intragranular ferrite nucleation, which played a vital role in grain refinement, increased with cooling rate. Fully bainitic microstructures were formed at higher cooling rates in the cast steel. In the P/F steels inclusions and incompletely closed pores served as sites for ferrite nucleation, often forming a ‘secondary’ ferrite. The rolling schedule reduced the size of large pores and particle surface inclusions and removed interconnected porosity in the P/F steels. Formerly Postgraduate Researcher in the Department of Metallurgy and Materials Science, UMIST/University of Manchester, United Kingdom