Nanostructured hybrid ZnO thin films for energy conversion

We report on hybrid films based on ZnO/organic dye prepared by electrodeposition using tetrasulfonated copper phthalocyanines (TS-CuPc) and Eosin-Y (EoY). Both the morphology and porosity of hybrid ZnO films are highly dependent on the type of dyes used in the synthesis. High photosensitivity was observed for ZnO/EoY films, while a very weak photoresponse was obtained for ZnO/TS-CuPc films. Despite a higher absorption coefficient of TS-CuPc than EoY, in ZnO/EoY hybrid films, the excited photoelectrons between the EoY levels can be extracted through ZnO, and the porosity of ZnO/EoY can also be controlled.     

Preference structure for lamb meat consumers. A Spanish case study

There is a current tendency in the European Union member countries to cut down on meat consumption. This tendency is not due as much to the traditional income-price factor, but to other attributes whose influence is gaining relative importance. Some of them are: quality, image, health, food safety and changes in people's taste. In addition, the relative importance of different attributes valued by the consumer must be weighed in order to develop marketing strategies which increase lamb meat consumption. In order to determine these preferences, 400 consumers were asked to evaluate different attributes (price, certification, origin, and commercial type) of lamb meat. Results obtained by means of conjoint analysis techniques show that regular consumers as well as occasional ones show a preference for lamb meat type. In this sense, a market share simulation of preferred (suckling and "ternasco") types proved that regular consumers generally prefer suckling lamb to "ternasco" lamb when both are from Castilla-La Mancha.     

Swelling behavior of chitosan/pectin polyelectrolyte complex membranes. Effect of thermal cross-linking

Summary Membranes of the polyelectrolyte complex between chitosan and pectin were prepared by precipitating the complex from a mixture of both polysaccharides. It was shown that the swelling kinetics of these membranes follows a Fickean behavior. The membranes were heated at 120 °C in order to convert the –NH₃^+-OOC- salt bonds into amide bonds. The thermally treated membranes were stable in strongly acid and basic media. The extent of amide bond formation was followed by FTIR spectroscopy. It was found that as the reaction time increased, both the absorbance ratio A₁₇₄₄/A₁₀₈₂ and the maximum swelling of the membrane decreased. The surface morphology of the membranes did not vary appreciably with the thermal treatment.     

Polypropylene membranes modified with interpenetrating polymer networks for the removal of chromium ions

Polypropylene (PP) membranes incorporating poly[(ar‐vinylbenzyl) trimethylammonium chloride] P(ClVBTA), and poly[sodium (styrene sulfonate)] P(SSNa) were modified via an “in situ” radical polymerization synthesis. Two methods were used for impregnation of the reactive solution: pressure injection and plasma superficial activation with argon gas. The following conditions were varied: the monomer concentrations, number of injections, and cross‐linked concentration. The modified polypropylene membranes were then characterized using scanning electron microscopy/energy dispersive X‐ray spectroscopy, Fourier transform‐infrared spectroscopy, electrokinetic potential, and Donnan dialysis for the chromium ions transport. The modified membranes exhibited a hydrophilic character with a water uptake capacity between 15% and 20% and a percent modification between 2.5% and 4.0%. This was compared with the results of an unmodified polypropylene membrane as the blank and the mentioned polypropylene membrane has not the capacity to uptake water because this kind of material is highly hydrophobic. Hexavalent chromium ions were efficiently transported by the modified membranes containing P(ClVBTA) via a plasma method and it achieved 59.2% extraction at pH 9.0 using a 1‐mol L^?1 NaCl extraction agent. Therefore, unmodified polypropylene membrane shows an extraction percentage close to 10% from the hexavalent chromium ions at pH 9.0. In the same way, the trivalent chromium transport using membranes modified with P(SSNa) achieved 49.0% extraction at pH 2.0 using 1 × 10^?1 mol L^?1 HNO₃ and 1 mol L^?1 NaCl as the extraction agents. Moreover, the unmodified polypropylene membrane reached a value close to 10% from the trivalent chromium ions using 1 × 10^?1 mol L^?1 HNO₃ and 1 mol L^?1 NaCl. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41953.     

Water‐soluble polymer and photocatalysis for arsenic removal

In this study, the photocatalytic oxidation of hazardous arsenite (As(III)) to arsenate (As(V)) and the sequential removal of arsenate from aqueous solution by liquid‐phase polymer‐based retention (LPR) were investigated. The photocatalytic oxidation of arsenite was performed using TiO₂ (P25 Degussa, Germany) under UV‐A light. The optimal photocatalytic conditions to oxidize 10 mg L^?1 of arsenite solution were achieved using a 0.5 g L^?1 of catalyst at a pH value of 2. The As(III) oxidation reached 100% after 30 min of illumination with UV‐A light. A water‐soluble polymer containing quaternary ammonium groups, poly(3‐acrylamidopropyl)trimethylammonium chloride (P(ClAPTA)), was used as an extracting reagent in the LPR process. To obtain the optimized conditions, the removal experiments were performed at various polymer : As(V) molar ratios using 10 mg L^?1 of arsenate solutions. After the oxidation of As(III) to As(V), the removal of arsenate by P(ClAPTA) was obtained in a 99% yield using a 20 : 1 polymer : As(V) molar ratio at a pH value of 9. The results demonstrate that the combination of these methods is highly useful for potential applications related to the treatment of wastewater contaminated with As(III). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40871.     

Polyelectrolyte-Cu(II) interactions studied by cyclic voltammetry

SUMMARY The polymer-metal ion interactions were studied by cyclic voltammetry. These were carried out with poly(acrylic acid)-Cu(II) and poly(vinylsulfonic acid)-Cu(II) systems at different pH. At low pH, the polymer was adsorbed on the electrode surface increasing the irreversibility of the Cu²⁺/Cu(s) redox system. At pH 2.7, it was possible to demonstrate that the interaction between Cu(II) and poly(vinylsulfonic acid) is basically electrostatic and with poly(acrylic acid) a complex formation also exists. Received: 5 April 2000/Accepted: 16 August 2000     

A novel protein tyrosine phosphatase gene is mutated in progressive myoclonus epilepsy of the Lafora type (EPM2)

Progressive myoclonus epilepsy of the Lafora type or Lafora disease (EPM2; McKusick no. 254780) is an autosomal recessive disorder characterized by epilepsy, myoclonus, progressive neurological deterioration and glycogen-like intracellular inclusion bodies (Lafora bodies). A gene for EPM2 previously has been mapped to chromosome 6q23-q25 using linkage analysis and homozygosity mapping. Here we report the positional cloning of the 6q EPM2 gene. A microdeletion within the EPM2 critical region, present inhomozygosis in an affected individual, was found to disrupt a novel gene encoding a putative protein tyrosine phosphatase (PTPase). The gene, denoted EPM2, presents alternative splicing in the 5' and 3' end regions. Mutational analysis revealed that EPM2 patients are homozygous for loss-of-function mutations in EPM2. These findings suggest that Lafora disease results from the mutational inactivation of a PTPase activity that may be important in the control of glycogen metabolism.     

Grafting of polypropylene and its potential use as metal ion adsorption resin

Polypropylene (PP) was modified by radical grafting of acrylic acid (AA) in the melt by using dicumyl peroxide (DCP) as initiator. To reach a high grafting degree (GD) without substantially modifying PP‐chain structure, a few runs were carried out by employing butyl 3‐(2‐furanyl)propenoate (BFA), which is a coagent able to preserve the molecular weight (MW) of PP macromolecules in the presence of radical grafting reagents. All the samples were extracted with selective solvents to remove unreacted chemicals and free poly(acrylic acid) (PAA), and the GD was accurately determined by using the FTIR methodology. The GD ranged from 1.51 to 4.67 mol %. High‐temperature size permeation chromatography analysis was used to evaluate MW behavior, confirming the control exerted by the presence of BFA on the degradation reactions. DSC, TGA, and SEM analyses were performed to analyze the chemical modification effects on the polymer products' thermal and morphological properties. Finally, selected samples, with a particle size distribution in the range 100–850 μm, were tested as metal ion adsorption resins. Al(III), Cr(III), Zn(II), Cd(II), Pb(II), and Hg(II) were studied, and the highest adsorption efficiency values (in percentage) were obtained for Al(III) (15–20%) and Hg(II) (25–30%). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Endoglin modulates cellular responses to TGF-beta 1

Endoglin is a homodimeric membrane glycoprotein which can bind the beta 1 and beta 3 isoforms of transforming growth factor-beta (TGF-beta). We reported previously that endoglin is upregulated during monocyte differentiation. We have now observed that TGF-beta itself can stimulate the expression of endoglin in cultured human monocytes and in the U-937 monocytic line. To study the functional role of endoglin, stable transfectants of U-937 cells were generated which overexpress L- or S- endoglin isoforms, differing in their cytoplasmic domain. Inhibition of cellular proliferation and downregulation of c-myc mRNA which are normally induced by TGF-beta 1 in U-937 cells were totally abrogated in L-endoglin transfectants and much reduced in the S-endoglin transfectants. Inhibition of proliferation by TGF-beta 2 was not altered in the transfectants, in agreement with the isoform specificity of endoglin. Additional responses of U-937 cells to TGF-beta 1, including stimulation of fibronectin synthesis, cellular adhesion, platelet/endothelial cell adhesion molecule 1 (PECAM-1) phosphorylation, and homotypic aggregation were also inhibited in the endoglin transfectants. However, modulation of integrin and PECAM-1 levels and stimulation of mRNA levels for TGF-beta 1 and its receptors R-I, R-II, and betaglycan occurred normally in the endoglin transfectants. No changes in total ligand binding were observed in L-endoglin transfectants relative to mock, while a 1.5-fold increase was seen in S-endoglin transfectants. The degradation rate of the ligand was the same in all transfectants. Elucidating the mechanism by which endoglin modulates several cellular responses to TGF-beta 1 without interfering with ligand binding or degradation should increase our understanding of the complex pathways which mediate the effects of this factor.     

Structure of complex cell wall polysaccharides isolated from Trichoderma and Hypocrea species

The structure of fungal polysaccharides isolated from the cell wall of Trichoderma reesei, T. koningii, and Hypocrea psychrophila, have been investigated by means of chemical analyses and 1D and 2D NMR spectroscopy. The polysaccharides have an irregular structure, idealized as follows: [formula: see text] The proportions of the different side chains vary from a species to another, being n above some three times larger in H. psychrophila than in T. reesei or T. koningii.