The Importance of Crosslinking and Glass Transition Temperature for the Mechanical Strength of Nanofibers Obtained by Green Electrospinning

Crosslinked particles containing butyl acrylate, methyl methacrylate, and allyl methacrylate are prepared by free‐radical emulsion polymerization. The glass transition temperatures of the polymers are varied by the crosslinking densities in the latex particles. Aqueous acrylate dispersions with polymers of different glass transition temperatures are electrospun with PVA as the matrix polymer. The effects of crosslinking density and T_g on the structure and mechanical properties of the fibers are studied. Crosslinking of unreacted allyl groups is induced by UV irradiation to stabilize the fibers by interparticle crosslinking. Both the ability to undergo interparticle crosslinking and the E modulus depend on the merging of the particles during the electrospinning process.

     

Bulk Sediment and Diatom Silica Carbon Isotope Composition from Coastal Marine Sediments off East Antarctica

Organic carbon occluded in diatom silica is assumed to be protected from degradation in the sediment. δ¹³C from diatom carbon (δ¹³C_(diatom)) therefore potentially provides a signal of conditions during diatom growth. However, there have been few studies based on δ¹³C_(diatom). Numerous variables can influence δ¹³C of organic matter in the marine environment (e.g., salinity, light, nutrient and CO₂ availability). Here we compare δ¹³C_(diatom) and δ¹³C_(TOC) from three sediment records from individual marine inlets (Rauer Group, East Antarctica) to (i) investigate deviations between δ¹³C_(diatom) and δ¹³C_(TOC), to (ii) identify biological and environmental controls on δ¹³C_(diatom) and δ¹³C_(TOC), and to (iii) discuss δ¹³C_(diatom) as a proxy for environmental and climate reconstructions. The records show individual δ¹³C_(diatom) and δ¹³C_(TOC) characteristics, which indicates that δ¹³C is not primarily controlled by regional climate or atmospheric CO₂ concentration. Since the inlets vary in water depths offsets in δ¹³C are probably related to differences in water column stratification and mixing, which influences redistribution of nutrients and carbon within each inlet. In our dataset changes in δ¹³C_(diatom) and δ¹³C_(TOC) could not unequivocally be ascribed to changes in diatom species composition, either because the variation in δ¹³C_(diatom) between the observed species is too small or because other environmental controls are more dominant. Records from the Southern Ocean show depleted δ¹³C_(diatom) values (1–4 ‰) during glacial times compared to the Holocene. Although climate variability throughout the Holocene is low compared to glacial/interglacial variability, we find variability in δ¹³C_(diatom), which is in the same order of magnitude. δ¹³C of organic matter produced in the costal marine environment seems to be much more sensitive to environmental changes than open ocean sites and δ¹³C is of strongly local nature.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

Growth of all-carbon horizontally aligned single-walled carbon nanotubes nucleated from fullerene-based structures

All-carbon single-walled carbon nanotubes (SWCNTs) were successfully synthesized, nucleated using a fullerene derivative. A systematic investigation into the initial preparation of C₆₀ fullerenes as growth nucleators for the SWCNTs was conducted. Enhancement in the yield of the produced SWCNT has been achieved with exploring different dispersing media for the fullerenes, the period, and environment of the initial thermal treatment of the fullerenes in addition to the use of different fullerene-based structures. The systematic studies significantly advance our understanding of the growth of the all-carbon catalyst-free single-walled carbon nanotubes. Field-effect transistors were fabricated using the catalyst-free SWCNT and then electrically characterized, showing current capacity as high as the well-studied catalyst-assisted nanotubes.     

Kinetics of Mullite Grain Growth in Alumino Silicate Fibers

Grain growth kinetics of mullite in laboratory-produced and commercial (3M-Nextel 720) alumino silicate fibers was analyzed in the temperature range between 1500° and 1700°C. The lab fibers consist of mullite plus traces of α-alumina, while the phase content of the commercial Nextel 720 fibers is about 60 wt% mullite plus 40 wt%α-alumina. The temperature-induced grain coarsening of mullite follows the empirical law D ^{1/ n} − D ₀^{1/ n} = kt . Two different temperature regimes can be distinguished with respect to the grain growth exponents: above 1600°C the growth exponent is ≈1/3, while below 1600°C the growth exponent of ≈1/12 is exceptionally low. Laboratory-produced and commercial fibers show almost identical mullite grain growth kinetics.     

Identification and Optimization of the First Highly Selective GLUT1 Inhibitor BAY‐876

Despite the long‐known fact that the facilitative glucose transporter GLUT1 is one of the key players safeguarding the increase in glucose consumption of many tumor entities even under conditions of normal oxygen supply (known as the Warburg effect), only few endeavors have been undertaken to find a GLUT1‐selective small‐molecule inhibitor. Because other transporters of the GLUT1 family are involved in crucial processes, these transporters should not be addressed by such an inhibitor. A high‐throughput screen against a library of ～3 million compounds was performed to find a small molecule with this challenging potency and selectivity profile. The N‐(1H‐pyrazol‐4‐yl)quinoline‐4‐carboxamides were identified as an excellent starting point for further compound optimization. After extensive structure–activity relationship explorations, single‐digit nanomolar inhibitors with a selectivity factor of >100 against GLUT2, GLUT3, and GLUT4 were obtained. The most promising compound, BAY‐876 [N⁴‐[1‐(4‐cyanobenzyl)‐5‐methyl‐3‐(trifluoromethyl)‐1H‐pyrazol‐4‐yl]‐7‐fluoroquinoline‐2,4‐dicarboxamide], showed good metabolic stability in vitro and high oral bioavailability in vivo.     

Pyrolysis-field ionization mass spectrometry of polyamide copolymers and blends

Nylon foils of PA 6, PA 66, PA 69, PA 12, the copolymer PA 666, and nine blends based on these polymides have been investigated by in-source pyrolysis (Py)–field ionization mass spectrometry (FIMS). These polymers and blends can be distinguished by characteristic molecular ions of oligomers, protonated amines and nitriles, and products terminated by olefinic end groups. Series of ions are formed differing in the number of additional monomeric units. Thus, polymers containing different chemical subunits were easily distinguished from each other in the spectra of the blends. Mass signals, only expected for copolymers, were found in the integrated blend spectra, indicating that amide exchange reactions occur under the experimental conditions employed. This observation was confirmed by pyrolysis of mixtures of pure polymers in the same crucible and under the same experimental conditions. Hence, the distinction by Py–MS alone between blends and copolymers with an identical averaged number of identical chemical subunits is not possible.     

Synthesis of 9,12-Dioxo-10(Z)-dodecenoic acid, a new fatty acid metabolite derived from 9-hydroperoxy-10,12-octadecadienoic acid in lentil seed (Lens culinaris medik.)

The previously unknown linoleic acid peroxidation product 9,12-dioxo-10(Z)-decenoic acid (Z5) was detected in lentil seed fluor (Lens culinaris Medik.) by electron impact mass spectrometry (El-MS) after derivatization with pentafluorobenzyl-hydroxylamine-hydrochloride, methylation of acidic groups with diazomethane, and protection of hydroxylic groups with N-methyl-N-trimethylsilyl-trifluoroacetamide. The structure of the natural product was confirmed by synthesis of Z5, 9,12-dioxo-10(E)-decenoic acid, and derivatives. EI-MS, nuclear magnetic resonance and gas chromatographic data of these compounds and synthetic intermediates are discussed.     

Results of an inter-laboratory comparison of methods for quantitative clay analysis

In a comparison of analytical methods in clay mineralogy, two clay samples (from Hennersdorf and Freydegg) of different clay composition were analyzed by 19 laboratories mainly by XRD. Participants used different methods of pre-treatment, preparation, analysis and evaluation.In spite of the diversity of analytical methods applied, reasonable conformity in quantitative results was obtained for the associated minerals (quartz, calcite and dolomite). On the other hand, qualitative identification of the clay minerals showed considerably stronger divergencies, causing a stronger deviation of quantitative data; analysis of the Freydegg sample proved to have been particularly difficult. The evaluation methods of the different participants were examined to determine whether similar methods provided results that could be more easily compared.In addition, the authors calculated the clay mineral composition according to three different recognized methods, using the same diffractograms and same preparation and measuring conditions. In spite of this, different results were obtained.In the next phase of the programme, an inter-laboratory comparison of methods will be achieved under exactly defined conditions of preparation and analysis.