Path integral Monte Carlo simulations of the melting of molecular hydrogen surfaces

We have used Path Integral Monte Carlo to study the surface melting of molecular hydrogen. Density profiles perpendicular and parallel to the bare H₂ surface are computed showing the formation of a liquid adlayer at 6 K, less than half the bulk melting temperature of para-hydrogen, 13.8 K. To estimate the onset temperature and depth of H₂ surface melting we determine the static structure factor within the individual H₂-layers for wave vectors in the plane and find no crystalline order down to 3 K in a partially filled H₂ adlayer at the free surface. We find quantum effects amplify the melting point depression at the free H₂ surface compared to bulk by a factor of five over classical Lennard-Jones solids and find that the zero-point fluctuations of molecules at the surface are much enhanced over their bulk values. We see vacancy formation in the solid before melting.     

Immobilization of inert TRISO-coated fuel in glass for geological disposal

Vitrification of TRISO-coated gas reactor fuel particles was achieved via two methods: glass melting and sintering. Inert TRISO-coated fuel particles and a borosilicate glass were used. With glass melting at 1200-1300 °C floatation and decomposition of carbon and silicon carbide occurred. Thermal pre-treatment of the particles for oxidation of pyrocarbon did not improve the coating properties of the glass. During cooling most of the particles floated and sorbed on the crucible or mold walls. The sintered glass at 700 °C showed better coating properties of the TRISO-coated fuel particles despite higher porosity compared to glass made by melting. Aqueous leaching properties of glass with particles are similar regardless the mode of fabrication, indicating the good chemical durability of the sintered glass. Sintered glasses may constitute a good technique for TRISO-coated fuel particles immobilization for an eventual deep geological disposal.     

Perceived intragroup homogeneity in minority-majority contexts.

Examined how the factors relative in-group size and relative outgroup size (i.e., minority vs. nonminority) affect the perception of in-group and out-group homogeneity. On the basis of social identity theory, we hypothesized that (a) members of minorities would perceive the in-group as more homogeneous than the out-group, whereas members of nonminorities would perceive the reverse; (b) this effect would be strongest on dimensions most strongly correlated with the social categorization; and (c) members of minorities would identify more strongly with their in-group than would members of nonminorities. 192 13–15 yr olds participated in the experiment. On the presumed basis of a perceptual task, approximately half were randomly allocated to minimal social categories, which differed in perceived size relative to an out-group (which also differed in perceived size). They were asked to estimate the homogeneity of the two groups on a number of dimensional attributes. The remaining (control) subjects gave similar estimates under identical conditions, except that they were not allocated to a category. The data confirmed all but the second hypothesis, which was only partially supported. The results were interpreted in terms of social identification processed. Results tend to rule out alternative explanations in terms of an inverse relation between group size and perceived group homogeneity, rating extremity, and in-group favoritism. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dreidimensionale,turbulente Strömungs-und Mischungsgradberechnung mit dem PISO-Algorithmus

Zusammenfassung Die numerische Berechnung von turbulenten Str?mungen, sei es isotherm oder mit chemischer Reaktion und W?rmefreisetzung, kann infolge der st?ndigen Fortschritte auf Seiten der Hardware-Entwicklung, auf immer weiteren Anwendungsgebieten eingesetzt werden. Im vorliegenden Fall handelt es sich um ein Programmpaket (COMPAC-3D), welches für die dreidimensionale Simulation der Str?mung und W?rmefreisetzung in Dampferzeugerfeuerungen konzipiert wurde. Hierbei kommt ein neuer Gleichungsl?sungs-und Bilanzierungsalgorithmus zum Einsatz, welcher es gestattet, Parameterstudient mit wesentlich geringerem Rechenzeitaufwand durchzuführen. Dieser Algorithmus wird im folgenden beschrieben. Anhand eines klassischen Testbeispiels, n?mlich der horizontalen Eindüsung in eine vertikale Hauptstr?mung, werden die Simulationsergebnisse mit Me?werten und Ergebnissen aus Rechenl?ufen mit dem Programmpaket PHOENICS verglichen.     

Small thermophotovoltaic prototype systems

In an earlier paper we reported on a small grid-connected thermophotovoltaic (TPV) system consisting of an ytterbia mantle emitter and silicon solar cells with 16% efficiency (under solar irradiance in standard test conditions, STCs). The emitter was heated up using a butane burner with a rated thermal power of 1.35 kW (referring to the lower heating value). This system produced an electrical output of 15 W, which corresponds to a thermal to electric (direct current) conversion efficiency of 1.1%. In the interim, further progress has been made, and significantly higher efficiencies have been achieved. The most important development steps are: (1) the infrared radiation-absorbing water filter between emitter and silicon cells (to protect the cells against overheating and against contact with flue gasses) has been replaced by a suitable glass tube. By doing this, it has been possible to prevent losses of convertible radiation in water. (2) Cell cooling has been significantly improved, in order to reduce cell temperature, and therefore increase conversion efficiency. (3) The shape of the emitter has been changed from spherical to a quasi-cylindrical geometry, in order to obtain a more homogeneous irradiation of the cells. (4) The metallic burner tube, on which the ytterbia emitter was fixed in the initial prototypes, has been replaced by a heat-resistant metallic rod, carrying ceramic discs as emitter holders. This has prevented the oxidation and clogging of the perforated burner tube. (5) Larger reflectors have been used to reduce losses in useful infrared radiation. (6) Smaller cells have been used, to reduce electrical series resistance losses. Applying all these improvements to the basic 1.35 kW prototype, we attained a system efficiency of 1.5%. By using preheated air for combustion (at approximately 370 °C), 1.8% was achieved. In a subsequent step, a photocell generator was constructed, consisting of high-efficiency silicon cells (21% STC efficiency). In this generator, the spaces between the cells were minimized, in order to achieve as high an active cell area as possible, while simultaneously reducing radiation losses. This new system has produced an electrical output of 48 W, corresponding to a system efficiency of 2.4%. This is the highest-ever-reported value in a silicon-cell-based TPV system using ytterbia mantle emitters. An efficiency of 2.8% was achieved by using preheated air (at approximately 500 °C). An electronic control unit (fabricated of components with low power consumption, and including a battery store) was developed, in order to make the TPV system self-powered. This unit controls the magnetic gas supply valve between gas supply cylinder and burner as well as the high-voltage ignition electrodes. Both the control unit’s own power consumption and the battery-charging power are supplied directly by the TPV generator. A small commercial inverter is used to transfer excess power to the 230 V grid.     

Exciton-polariton transition induced by elastic exciton-exciton collisions in ultrahigh quality AIGaAs alloys

The stationary and time-resolved polariton radiation in ultrahigh quality AIGaAs layers have been studied. It has been found that elastic exciton-exciton collisions lead to the appearance of a low-energy line of polariton radiation. We show that the rate of exciton-to-polariton transitions caused by elastic exciton-exciton collisions is determined not only by the density of the excitonic gas, but also by its temperature; this is in accordance with existing theoretical predictions. The text was submitted by the authors in English.     

Allogeneic sibling umbilical-cord-blood transplantation in children with malignant and non-malignant disease

Allogeneic bone marrow transplantation is limited by the availability of suitable marrow donors and risk of graft-versus-host disease (GVHD) and opportunistic infection. In an attempt to ameliorate these limitations, umbilical cord blood has been postulated as an alternative source of allogeneic haemopoietic stem cells for transplantation. From September, 1994, umbilical cord blood from sibling donors has been used to reconstitute haemapoiesis in 44 children with acquired or congenital lympho-haemapoietic disorders, neuroblastoma, or metabolic diseases. Patients who had HLA-identical and HLA-1 antigen disparate grafts, had a probability of engraftment at 50 days after transplantation of 85%. No patient had late graft failure. The probability of grade II-IV GVHD at 100 days was 3% and the probability of chronic GVHD at one year was 6%. With a median follow-up of 1.6 years, the probability of survival for recipients of HLA-identical or HLA-1 antigen disparate grafts is 72%. We conclude that umbilical cord blood is a sufficient source of transplantable haemopoietic stem cells for children with HLA-identical or HLA-1 antigen disparate sibling donors with very low risk of acute or extensive chronic GVHD. The feasibility of umbilical-cord-blood transplantation with HLA-2 and HLA-3 antigen disparate sibling donors remains to be determined.