Salmonella contamination in pigs at slaughter and on the farm: a field study using an antibody ELISA test and a PCR technique

An antibody ELISA test and a PCR method for identifying the risk of Salmonella contamination were compared in a field study on the same lots of animals in a slaughterhouse. The results were compared to investigations carried out on two farms with different prevalences of Salmonella antibody-positive animals. Salmonella antibody ELISA testing was carried out on all 383 meat juice samples derived from the diaphragm pillar muscle of each pig. Salmonella DNA analysis was performed by PCR technique on small intestine samples with lymph nodes from all 383 pigs, and on tonsils from the last 129 pigs. The 383 animals tested came from 32 different pig farms. Furthermore, the herd antibody blood serum status against Salmonella spp. of weaners was determined on two selected pig fattening farms, one with low and one with high seroprevalence in meat juice. A total of 7.0% (ELISA cut-off OD% > or =40) of the slaughtered pigs from 6 of 32 fattening farms were seropositive. Salmonella DNA was found in 16.4% of the jejunum/lymph nodes (383 animals) and in 15.5% of the tonsils (129 animals). Salmonella DNA was found in the jejunum/lymph nodes of 41% of the seropositive pigs. However, serotitres were also positive in only 17.5% of all pigs positive in the jejunum DNA test. Two farms were selected for further investigation: farm 13 (F13), with a high prevalence of seropositive pigs, 29.0%, Category II; and F11, with 9.4%, Category I. However, categorization according to the blood serum tests of the fattening pigs after on-farm testing was very different: F13 had 5% positive animals (Category I); and F11, 23.3% (Category II). The study led to the following results and recommendations: First, ELISA tests are useful for the detection of farms that are regularly contaminated with Salmonella, but such tests cannot give information on the infectious status of a single animal (or a group) at the point of slaughter. Second, it is crucial that management measures are taken to prevent the spread of infections by trade and transport: piglets should be supplied exclusively by a single, well-known producer, and finishers should be tested serologically on farm before going to slaughter. Third, ELISA tests and the PCR method are suitable for the detection of Salmonella and are recommended as analytical tools for all pork quality control programmes. Fourth, animals from suspicious farms should always be slaughtered at the end of the slaughter day, followed by thorough cleaning and disinfection.     

Enantioselective Reduction of Citral Isomers in NCR Ene Reductase: Analysis of an Active‐Site Mutant Library

A deeper understanding of the >99 % S‐selective reduction of both isomers of citral catalyzed by NCR ene reductase was achieved by active‐site mutational studies and docking simulation. Though structurally similar, the E/Z isomers of citral showed a significantly varying selectivity response to introduced mutations. Although it was possible to invert (E)‐citral reduction enantioselectivity to ee 46 % (R) by introducing mutation W66A, for (Z)‐citral it remained ≥88 % (S) for all single‐residue variants. Residue 66 seems to act as a lever for opposite binding modes. This was underlined by a W66A‐based double‐mutant library that enhanced the (E)‐citral derived enantioselectivity to 63 % (R) and significantly lowered the S selectivity for (Z)‐citral to 44 % (S). Formation of (R)‐citronellal from an (E/Z)‐citral mixture is a desire in industrial (?)‐menthol synthesis. Our findings pave the way for a rational enzyme engineering solution.     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Evaluation of pathways for washing soluble solids

Filter cake washing is a purification method for particulate products in liquids. This process is mostly one step of a sequence in a solid–liquid separation process. For soluble products not only the mechanical transport mechanisms in washing but also the dissolution process of the product must be considered in order to describe the washing process appropriately. An unconsidered dissolution may cause problems and often severe product loss depending on the material properties. This paper presents several methods of soluble solids washing including filter cake washing by pressure and centrifugal forces as well as moving bed washing. The advantages and drawbacks of each method are discussed to evaluate the suitability of its technical application.     

Development of a Ag/Ag micro-reference electrode for electrochemical measurements in ionic liquids

We report on a novel miniaturized Ag/Ag⁺ reference electrode (RE) design suitable for electrochemical measurements in room temperature ionic liquids (RTILs). The electrode is based on capillaries with an outer diameter of 365 μm and contains a 10 mmol/l solution of a silver salt in a RTIL. The silver salt bears the same type of anion as the RTIL. While potential shifts of several hundred millivolts have been observed for common platinum or silver pseudo-reference electrodes, our Ag/Ag⁺ micro electrode provides a stable and reliable reference potential over a period of more than two weeks, if protected from light and stored in a nitrogen atmosphere. Due to the small dimensions of the RE, it can be placed close to the working electrode (WE) and it is well-suited for application in electrochemical micro cells as well as for potential-controlled in situ AFM, STM or electrochemical impedance measurements. The electrode characteristics were determined by voltammetric measurements on ferrocene and cobaltocenium hexafluorophosphate dissolved in a RTIL. The highest expected contamination of the sample with Ag⁺ ions was calculated and found to be below 4 ppm.     

An analysis of cascade‐aerated facultative waste stabilisation ponds in the United Kingdom

This paper examines the performance of cascade‐aerated facultative ponds in a waste stabilisation pond (WSP) installation in the United Kingdom. The pond system is privately owned and treats wastewater from a conference centre with a population equivalent between 20 and 40. A snapshot analysis investigates the removal efficiency of BOD, COD, SS, FC and nutrients. Further, the oxygen supply through ‘flow form’ cascades is examined, and the DO concentrations, surface loads and retention times are discussed. The results show a very high removal of BOD, COD and SS; and nutrient removal is satisfactory. An unusual finding is that the FC removal efficiency is almost two log units better than for a common maturation pond. This is possibly attributable to the high cascade flow, where wastewater is exposed to the damaging effects of sunlight (photo‐oxidation).     

Instability during cohesive zone growth

Tensile microcracking of quasi-brittle materials is studied by means of micromechanics, based on (i) an elasto-damaging cohesive zone model accounting for cohesive softening and (ii) a dilute distribution of non-interacting microcracks of uniform orientation and size. Considering virgin microcracks (initially without cohesive zones), macroscopic tensile load increase results in growth of cohesive zones ahead of stationary (non-propagating) cracks and, subsequently, in crack propagation which, notably, will be encountered before the cohesive zones are fully developed i.e. onset of instable cohesive zone growth will be encountered at a load level (i) at which tractions are still transmitted across the inner edges of the cohesive zones and (ii) at which the separation at the inner edges of the cohesive zones is smaller than its critical value. Focusing on onset of instable cohesive zone growth, the chosen approach allows for accessing quantities characterizing the stability limit (e.g., the intensity of the macroscopic loading and the opening at the inner edges of the cohesive zones), without raising the need for non-linear Finite Element analyses. It is shown that the tensile macrostrength of materials containing virgin microcracks is larger than the one related to cracks with already initially fully developed cohesive zones, and related strength differences are quantified for a wide class of cohesive softening behavior. The proposed model is validated by comparing model predictions with an exact solution (available for the special case of constant cohesive tractions) and with results from reliable Finite Element analyses. The paper will be of interest for engineers involved in testing and/or in modeling of quasi-brittle media including cementitious materials and rock.     

Mixed crystalline films of co-evaporated hydrogen- and fluorine-terminated phthalocyanines and their application in photovoltaic devices

Blends of organic electron and hole conductive materials are widely used for ambipolar charge carrier transport and photovoltaic cells. An obvious choice for donor–acceptor blends are organic semiconducting materials in their hydrogenated and fluorinated form, since they combine potentially suitable electronic properties with structural compatibility of the two constituents. This study focuses on the structural, optical, and electrical properties of blends using hydrogenated copper-phthalocyanine (H₁₆CuPc) in combination with its per-fluorinated version (F₁₆CuPc). Using X-ray scattering, scanning force microscopy and optical absorption measurements we show that mixed crystalline films are obtained by co-evaporation of the two materials. Electrical transport measurements reveal a profound reduction of the current for bipolar charge injection in mixed films. We discuss the formation of self-trapped charge transfer excitons as possible explanation for this unexpected behaviour, which impedes the usability of this system in photovoltaic cells.