Viscosity‐molecular weight relationship for cellulose solutions in either NMMO monohydrate or cuen

The intrinsic viscosities, [η], of nine cellulose samples, with molar masses from 50 × 10³ to 1 390 × 10³ were determined in the solvents NMMO*H₂O (N‐methyl morpholin N‐oxide hydrate) at 80°C and in cuen (copper II‐ethlenediamine) at 25°C. The evaluation of these results with respect to the Kuhn–Mark–Houwink relations shows that the data for NMMO*H₂O fall on the usual straight line in the double logarithmic plots only for M ≤ 158 10³; the corresponding [η]/M relation reads log ([η]/mL g⁻¹) = –1.465 + 0.735 log M. Beyond that molar mass [η] remains almost constant up to M ≈ 10⁶ and increases again thereafter. In contrast to NMMO*H₂O the cellulose solutions in cuen behave normal and the Kuhn–Mark–Houwink relation reads log ([η]/mL g⁻¹) = −1.185 + 0.735 log M. Possible reasons for the dissimilarities of the behavior of cellulose in these two solvents are being discussed. The comparison of three different methods for the determination of [η] from viscosity measurements at different polymer concentrations, c, demonstrates the advantages of plotting the natural logarithm of the relative viscosities as a function of c. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Development of a Ag/Ag micro-reference electrode for electrochemical measurements in ionic liquids

We report on a novel miniaturized Ag/Ag⁺ reference electrode (RE) design suitable for electrochemical measurements in room temperature ionic liquids (RTILs). The electrode is based on capillaries with an outer diameter of 365 μm and contains a 10 mmol/l solution of a silver salt in a RTIL. The silver salt bears the same type of anion as the RTIL. While potential shifts of several hundred millivolts have been observed for common platinum or silver pseudo-reference electrodes, our Ag/Ag⁺ micro electrode provides a stable and reliable reference potential over a period of more than two weeks, if protected from light and stored in a nitrogen atmosphere. Due to the small dimensions of the RE, it can be placed close to the working electrode (WE) and it is well-suited for application in electrochemical micro cells as well as for potential-controlled in situ AFM, STM or electrochemical impedance measurements. The electrode characteristics were determined by voltammetric measurements on ferrocene and cobaltocenium hexafluorophosphate dissolved in a RTIL. The highest expected contamination of the sample with Ag⁺ ions was calculated and found to be below 4 ppm.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

Hydrothermally Stable WO3/ZrO2–Ce0.6Zr0.4O2 Catalyst for the Selective Catalytic Reduction of NO with NH3

A new catalyst WO₃/ZrO₂–Ce_0.6Zr_0.4O₂ (15 wt % WO₃/ZrO₂:Ce_0.6Zr_0.4O₂ = 50:50) has been developed for the selective catalytic reduction of NO with NH₃. The redox component Ce_0.6Zr_0.4O₂ was dispersed on the surface of acidic WO₃/ZrO₂ by the solution combustion method showing the best NO _x reduction efficiency among the catalysts prepared by various modes of mixing of the components. The catalyst has been characterized by XRD, Raman spectroscopy and NH₃-TPD. A NO _x reduction efficiency of more than 90 % was obtained between 300 and 500 °C at α = NH_3,in/NO _x,in = 1. The catalyst showed stable NO _x reduction efficiency after hydrothermal ageing at 700 °C. Sulfur poisoning promoted the NO _x reduction efficiency at high temperatures at the expense of a reduced activity at lower temperatures, but the catalyst could be fully regenerated by heating in O₂ at 650 °C.     

Flammability of layered silicate epoxy nanocomposites combined with low‐melting inorganic ceepree glass

Tetraphenylphosphonium modified layered silicate epoxy nanocomposite (EP/TPPMMT) combined with low‐melting silicate glass, Ceepree (CP) is investigated by thermal analysis, flammability tests and cone calorimeter at different heat fluxes. Adding CP and TPPMMT does not change the pyrolysis apart from increasing inorganic residue. The total heat evolved (THE) is changed insignificantly, as neither relevant additional carbonaceous charring nor flame inhibition occurs. However, flame retardancy is clearly observed due to an inorganic‐carbonaceous surface protection layer. The peak heat released rate (PHRR) is reduced by around 32–42% when 5 wt% TPPMMT is added, and 51–63% when 10 wt% CP is added. PHRR reduction less than expected is observed when both additives are combined. The reduction is greater than that achieved by using TPPMMT but less than when only CP is used. The morphology of fire residue is investigated by scanning electron microscope on different length scales and turns out to be the key to understanding the efficiency of flame retardancy. The fire residue of EP/CP shows a layered structure, whereas separated columns limit the barrier properties for EP/5%TPPMMT on the micrometer scale. Columns dominating the fire residue structure of EP/5%TPPMMT/10%CP deteriorate the fire retardancy, whereas a more integral structure at the top of the residue causes the improvement over EP/5%TPPMMT. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Crystal Structure Determination and Mutagenesis Analysis of the Ene Reductase NCR

The crystal structure of the “ene” nicotinamide‐dependent cyclohexenone reductase (NCR) from Zymomonas mobilis (PDB ID: 4A3U) has been determined in complex with acetate ion, FMN, and nicotinamide, to a resolution of 1.95 Å. To study the activity and enantioselectivity of this enzyme in the bioreduction of activated α,β‐unsaturated alkenes, the rational design methods site‐ and loop‐directed mutagenesis were applied. Based on a multiple sequence alignment of various members of the Old Yellow Enzyme family, eight single‐residue variants were generated and investigated in asymmetric bioreduction. Furthermore, a structural alignment of various ene reductases predicted four surface loop regions that are located near the entrance of the active site. Four NCR loop variants, derived from loop‐swapping experiments with OYE1 from Saccharomyces pastorianus, were analysed for bioreduction. The three enzyme variants, P245Q, D337Y and F314Y, displayed increased activity compared to wild‐type NCR towards the set of substrates tested. The active‐site mutation Y177A demonstrated a clear influence on the enantioselectivity. The loop‐swapping variants retained reduction efficiency, but demonstrated decreased enzyme activity compared with the wild‐type NCR ene reductase enzyme.     

Structure−Activity Relationships of Cinnamate Ester Analogues as Potent Antiprotozoal Agents

Protozoal infections are still a global health problem, threatening the lives of millions of people around the world, mainly in impoverished tropical and sub-tropical regions. Thus, in view of the lack of efficient therapies and increasing resistances against existing drugs, this study describes the antiprotozoal potential of synthetic cinnamate ester analogues and their structure-activity relationships. In general, Leishmania donovani and Trypanosoma brucei were quite susceptible to the compounds in a structure-dependent manner. Detailed analysis revealed a key role of the substitution pattern on the aromatic ring and a marked effect of the side chain on the activity against these two parasites. The high antileishmanial potency and remarkable selectivity of the nitro-aromatic derivatives suggested them as promising candidates for further studies. On the other hand, the high in vitro potency of catechol-type compounds against T. brucei could not be extrapolated to an in vivo mouse model.     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.     

Detailed Structure–Function Correlations of Bacillus subtilis Acetolactate Synthase

Isobutanol is deemed to be a next‐generation biofuel and a renewable platform chemical. 1 Non‐natural biosynthetic pathways for isobutanol production have been implemented in cell‐based and in vitro systems with Bacillus subtilis acetolactate synthase (AlsS) as key biocatalyst. 2 – 6 AlsS catalyzes the condensation of two pyruvate molecules to acetolactate with thiamine diphosphate and Mg²⁺ as cofactors. AlsS also catalyzes the conversion of 2‐ketoisovalerate into isobutyraldehyde, the immediate precursor of isobutanol. Our phylogenetic analysis suggests that the ALS enzyme family forms a distinct subgroup of ThDP‐dependent enzymes. To unravel catalytically relevant structure‐function relationships, we solved the AlsS crystal structure at 2.3 Å in the presence of ThDP, Mg²⁺ and in a transition state with a 2‐lactyl moiety bound to ThDP. We supplemented our structural data by point mutations in the active site to identify catalytically important residues.