响应面法优化速凝型无机防水堵漏材料的配方研究

以R·SAC42.5和P·O42.5R为基料,白砂、石膏为填料,碳酸锂作促凝剂,添加干燥剂、减水剂和消泡剂,在单因素试验基础上,以材料的初凝时间为评价指标,经响应面法优化配方,制备一种环保、经济且性能优良的速凝型无机防水堵漏材料。结果表明,R·SAC42.5为180 g,P·O42.5R为40 g,白砂为35 g,碳酸锂为0.1 g的最佳用量时,材料的初凝时间为2 min,终凝时间为6 min;产品凝结快速、质地坚硬、稳定性和附着力好,完全符合国家标准规定的技术性能要求。在公路修补、建筑和地下工程的防水堵漏上实际应用前景广阔。     

Characterization of roadway stormwater system residuals for reuse and disposal options

The chemical characterization of sediments accumulated in catch basins and stormwater ponds provides important information for assessing risks associated with management of these residuals upon removal of accumulated deposits in stormwater systems. In this study, over a period of 15 months, more than 150 residual samples were collected from 77 catch basin units and 22 stormwater ponds from 16 municipalities throughout the state of Florida. Concentrations (mg/kg) of metals and metalloids (arsenic, barium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, and zinc) and trace organics (volatile organics, semi-volatile organics, herbicides, and pesticides) in the sediments were measured. In addition, the synthetic precipitation leaching procedure (SPLP) was utilized to evaluate pollutant leachability risk for a subset of the samples collected. Measured pollutant concentrations were compared to corresponding risk-based guidelines in Florida (i.e., Florida soil cleanup target levels) to assess potential human health risks of beneficial use of these residuals through land application. Leached concentrations were compared to risk-based water quality guidelines (i.e., Florida groundwater cleanup target levels) to examine the potential for groundwater contamination. Although several metals (arsenic, barium, chromium, copper, nickel, lead, and zinc) were routinely detected in the catch basin and stormwater pond sediments, their concentrations were generally lower than the Florida's risk-based cleanup target levels for soils. A small number of organochlorine compounds (e.g., 4,4′-DDE, 4,4′-DDT) were detected, but only in a limited number of the samples (less than 10%); leaching of trace organic pollutants above the Florida risk-based groundwater thresholds was rare. The results suggest that when land-applied or beneficially used, these residuals are not expected to pose a significant threat to human health or the environment and the results of this research will provide stormwater managers and environmental management authorities with a useful resource to examine proper disposal and beneficial use of catch basin and stormwater pond sediments.     

Powder Synthesis,Sintering Kinetics,and Nickel-Activated Pressureless Sintering of Ti3AlC2

This work aims to produce Ti₃AlC₂ powder via a new route that consists of two-step processes, and studies the sintering kinetics and effect of nickel addition on the pressureless sintering behavior of Ti₃AlC₂ powder. Ti₃AlC₂ powder of about 5 μm was produced using TiC_x and Al powder. Relative density of about 97.6% was achieved using 1 wt% nickel as a sintering aid. Ti₃AlC₂ powder shows two different activation energies (AE) of sintering, 347 ± 4 and 183 ± 8 kJ/mol at lower and higher temperature ranges, respectively. These AE were found to be matching closely with the AE of Al diffusion in the Ti–Al binary system reported in the literature, indicating that the sintering of ternary Ti₃AlC₂ ceramic was controlled by the diffusion of Al atoms. When nickel is added, Ni reacts with Ti₃AlC₂, tends to decompose it, and forms Ni-based compounds and liquid phase. Nickel was found to suppress the grain growth of Ti₃AlC₂ significantly. Sintered sample exhibited a Vickers hardness of 3.2 GPa at a load of 10 N.     

The First Example of Saccharin‐Lithium Bromide Catalysis: Direct Synthesis of N‐Tosylimines from Alcohols

The first procedure to access N‐tosylimines directly from alcohols under mild and neutral conditions is reported. The protocol involves saccharin‐lithium bromide‐catalyzed oxidation of alcohols to aldehydes/ketones with chloramine‐T followed by their condensation with the in situ generated oxidation by‐product p‐toluenesulfonamide in the same reaction vessel to afford N‐tosylimines in 40–90% overall yields. The present work opens up a new and efficient synthetic route to N‐tosyimines directly from alcohols in a one‐pot procedure.     

Natural convection heat transfer from upward-facing plates in saline water

Saltwater or brackish water is used as a coolant in most industries. Therefore, understanding the heat transfer processes and hydrodynamics during the natural convection in saline water is crucial for enhancing the efficiency of a heat exchanger. This study elaborates on the natural convection heat transfer in saline water under atmospheric conditions. A DC power supply is used to regulate the power given to the heater in a liquid pool for thermal analysis. The pool liquid comprises solutions with varying salinity from 0%, 0.2%, 0.5%, and 2%. The effect of varying salinity on the heat transfer coefficient and the thermal aspects encountered during the desalination process is analyzed. The temperature distribution across the surface of the heater is monitored using an infrared camera. It is studied for the solution of different salinities. The heat transfer coefficient and Nusselt number are investigated during natural convection for normal water and salt solution of different concentrations. It is inferred from the study that in the regime of natural convection, there is no significant difference in the Nusselt number for normal water and saltwater for the lower value of temperature difference between the plate and pool. The heat transfer coefficient in 0.2% saline water is higher as compared to the other solutions.     

Laser Treatment of Sintered Silicon Carbide Surface for Enhanced Hydrophobicity

In this study, laser treatment of sintered SiC surfaces is carried out to enhance the surface hydrophobicity. Morphological and metallurgical changes of the treated surfaces are evaluated using optical and scanning electron microscopy, energy dispersive spectroscopy, and x-ray diffraction (XRD). Microhardness and fracture toughness are measured using indentation tests. The residual stresses present are determined using the XRD technique. The wetting characteristics of the treated surfaces are assessed through contact angle measurements. It is found that the laser-treated surfaces consist of fine grooves and pillars and that the resulting surface roughness enhances the surface hydrophobicity. The fracture toughness of the treated surface is reduced possibly because of the microhardness increase at the surface. The residual stress formed in the surface region is on the order of 1.8 GPa, and it is compressive.     

The interconnected CaCO3 coated SnO2 nanocrystalline dye-sensitized solar cell with superior performance

Design, Development, fabrication and investigation of the I–V characteristics of the DSSC based on interconnected 15 nm SnO₂ nanoparticles covered with a nano-scale thin layer of CaCO₃ are described. The presence of CaCO₃ has been confirmed by its characteristic XRD pattern and EDX plots. The thickness of the protective layer can be conveniently controlled by the molar ratio of SnO₂:CaCO₃ used in the preparation of the thin film and the optimum conditions for best performance of the DSSC are presented together with possible explanations for the variations observed when the molar ratio is changed. An optimum light-to-electricity conversion efficiency of 5.4% in the presence of a layer of CaCO₃ has been obtained which is 3.2 times enhancement over the cell prepared without CaCO₃. The characterization of the surface using different techniques is explained.     

Thiocompounds as simulants of sulphur mustard for testing of protective barriers

The protective potential of protective devices such as respirators, suits, gloves, and overboots is widely evaluated using the standard colorimetric test (spot disc breakthrough time test, also called SD BTT) involving sulfur mustard (SM) as the challenge chemical. The vesicant nature of SM makes the test inconvenient and poses stringent safety demands. Moreover, such tests are allowed only at a limited number of facilities, causing delay in product development and supply. This prompted the present study on the search for suitable SM simulant responsive to SD BTT test. The diffusivities at BTT (D_BTT) of 10 commercially available thiocompounds through butyl rubber (IIR) were compared vis‐a‐vis D_BTT of SM. For three representative thiocompounds, namely methyl (phenyl thio)acetate, 2‐chloroethyl phenyl sulfide (2‐CEPS) and phenyl‐n‐propyl sulfide (PNPS), the transport parameters through IIR were obtained. PNPS and 2‐CEPS were further compared with respect to D_BTT in elastomers such as IIR, ethylene–propylene–diene methylene rubber, polydimethylsiloxane, nitrile rubber, polybutadiene, and natural rubber. 2‐CEPS showed generally same order of D_BTT as SM implying its potential use as a simulant. The transport parameters for various 2‐CEPS/elastomer systems were also determined. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009