The distribution of osteocalcin, degree of mineralization, and mechanical properties along the length of Cyprinus carpio rib bone

This study examined the spatial distribution of selected biochemical and mechanical properties along the length of carp rib bone. Carp rib bone was chosen because of its unusually high osteocalcin content relative to other extractable proteins. The amount of osteocalcin was significantly lower (p<0.01) at the most distal section, relative to all other sections. The amount of phosphate (p<0.05) and the elastic modulus in the longitudinal plane (p<0.0001) were found to be significantly higher in the most distal section, relative to the most proximal section. There was no significant difference in the calcium distribution, molar Ca/P ratio, or elastic modulus in the transverse plane. It was speculated that the distal section contains less mature bone. The methods illustrate the potential usefulness of nanoindentation to characterize the mechanical properties of bone, relative to its biochemical composition. © 2001 Kluwer Academic Publishers     

Analysis and characterization of photo-plethysmographic signal

Qualitative assessment of the overall clinical status of the subject and characterization of complex cardiovascular dynamics from digital blood volume pulsations measured noninvasively using a photo-plethysmographic device is addressed. A novel concept is employed to detect the dominant nonsinusoidal periodicity embedded in the data series and to extract the associated periodic component. The detection and the extraction of periodic component is performed with moving window to accommodate the variations of the physiological oscillations. The covariance matrix formed by the gradually varying pattern is used as a simple measure of qualitative assessment. Further, the characterization of the underlying system in the light of nonlinear dynamical analysis is also presented. The stable subjects are shown to behave as a low-dimensional system whereas the diseased subjects exhibit comparatively high dimensional activity.     

Review on Metal-Filled Plastics. Part1. Electrical Conductivity

Plastic composites are members of both the oldest and the newest of materials. The first reinforced polymeric-based materials are recorded in Genesis and Exodus in the Bible as being used by the people of Babylonia and Mesopotamia around 4000–2000 B.C. These materials consisted of bitumen-based pitch for building products and bundles of papyrus reed embedded in a bitumen matrix for the construction of river boats [1]. The Hindu Vedas (written about 1000 B.C.) refers to the use of lac (a complex polymeric substance consisting of polyether and polyester chains) with fine sand for the manufacture of whetstones, which were known in India and China for several thousand years. There are a number of examples that could date back the origin of polymer composites into antiquity [1–3]. but the science of enhancing the properties of polymeric composites by the use of suitable fillers has been practiced extensively not earlier than the beginning of this century. For example, the tensile strength of polystyrene was modified by the incorporation of glass fillers only in the 1950s, half a century later than that predicted by Backeland in the early 1900s [2]. Carbon black is known to be a potential reinforcement for rubber for over 50 years. Although glass bead and glass fibers have been known for centuries, the use of these economical products in the plastic industry is relatively new [2].     

Quality assurance of PASADENA hyperpolarization for 13C biomolecules

Object  Define MR quality assurance procedures for maximal PASADENA hyperpolarization of a biological ¹³C molecular imaging reagent. Materials and methods  An automated PASADENA polarizer and a parahydrogen generator were installed. ¹³C enriched hydroxyethyl acrylate, 1-¹³C, 2,3,3-d₃ (HEA), was converted to hyperpolarized hydroxyethyl propionate, 1-¹³C, 2,3,3-d₃ (HEP) and fumaric acid, 1-¹³C, 2,3-d₂ (FUM) to hyperpolarized succinic acid, 1-¹³C, 2,3-d₂ (SUC), by reaction with parahydrogen and norbornadiene rhodium catalyst. Incremental optimization of successive steps in PASADENA was implemented. MR spectra and in vivo images of hyperpolarized ¹³C imaging agents were acquired at 1.5 and 4.7 T. Results  Application of quality assurance (QA) criteria resulted in incremental optimization of the individual steps in PASADENA implementation. Optimal hyperpolarization of HEP of P = 20% was achieved by calibration of the NMR unit of the polarizer (B ₀ field strength ± 0.002 mT). Mean hyperpolarization of SUC, P = [15.3 ± 1.9]% (N = 16) in D ₂O, and P = [12.8 ± 3.1]% (N = 12) in H ₂O, was achieved every 5–8 min (range 13–20%). An in vivo ¹³C succinate image of a rat was produced. Conclusion  PASADENA spin hyperpolarization of SUC to 15.3% in average was demonstrated (37,400 fold signal enhancement at 4.7 T). The biological fate of ¹³C succinate, a normally occurring cellular intermediate, might be monitored with enhanced sensitivity.     

Fundamental Limits of Organic Packages and Boards and the Need for Novel Ceramic Boards for Next Generation Electronic Packaging

The system-on-a-package (SOP) paradigm proposes a package level integration of digital, RF/analog and opto-electronic functions to address future convergent microsystems. Two major components of SOP fabrication are sequential build-up of multiple layers (4–8) of conducting copper patterns with interlayer dielectrics on a board and multiple ICs flip-chip bonded on the top layer. A wide range of passives, wave-guides and other RF and opto-electronic components buried within the dielectric layers provide the multiple functions on a single microminiaturized platform.The routing of future nanoscale ICs with 10,000+ I/Os require multiple build-up layers of ultra fine board feature sizes of 10 m lines/space widths and 40 m pad diameters. Current FR4 boards cannot achieve this build-up technology because of dimensional instability during processing. These boards also undergo high warpage during the sequential build-up process which limits the fine-line lithography and also causes misalignment between the vias and their corresponding landing pads. In addition, the CTE mismatch between the silicon die and the board leads to IC-package interconnect reliability concerns, particularly in future fine-pitch assemblies where underfilling becomes complicated and expensive.This work reports experimental and analytical work comparing the performance of organic and novel ceramic boards for SOP requirements. The property requirements as deduced from these results indicate that a high stiffness and tailorable CTE from 2–4 ppm/C is required to enable SOP microminiaturized board fabrication and assembly without underfill. A novel ceramic board technology is proposed to address these requirements.     

Impact of Stone-Wales and lattice vacancy defects on the electro-thermal transport of the free standing structure of metallic ZGNR

We report the effect of topological as well as lattice vacancy defects on the electro-thermal transport properties of the metallic zigzag graphene nano ribbons at their ballistic limit. We employ the density function theory–Non equilibrium green’s function combination to calculate the transmission details. We then present an elaborated study considering the variation in the electrical current and the heat current transport with the change in temperature as well as the voltage gradient across the nano ribbons. The comparative analysis shows, that in the case of topological defects, such as the Stone-Wales defect, the electrical current transport is minimum. Besides, for the voltage gradient of 0.5 Volt and the temperature gradient of 300 K, the heat current transport reduces by \({\sim }62\,\%\) and \({\sim }50\,\%\) for the cases of Stones-Wales defect and lattice vacancy defect respectively, compared to that of the perfect one.     

A novel wavelet transform aided neural network based transmission line fault analysis method

In the present scenario of market driven business, power supply has become more like a commodity. Reliable and quality power need to be ensured to meet customer requirements. In such a situation, it is extremely important that transmission line faults be identified accurately, reliably and in quick time. Advanced signal processing tools such as discrete wavelet transform (DWT) can be used very effectively for parameterisation and characterization of the fault signals. On the other hand, properly configured neural network (NN) can be utilized for classification of the faults based on the DWT signal. The present contribution uses electromagnetic transient program (EMTP) for modeling of a real transmission system and MATLAB for DWT and NN. Various types of faults have been simulated at different locations along the transmission line and an attempt has been made to correctly identify and locate the fault.     

Studies on spinel cobaltites,MCo2O4 (M = Mn,Zn, Fe,Ni and Co) and their functional properties

Optimization of electrodes for charge storage with appropriate processing conditions places significant challenges in the developments for high performance charge storage devices. In this article, metal cobaltite spinels of formula MCo₂O₄ (where M = Mn, Zn, Fe, Ni and Co) are synthesized by oxalate decomposition method followed by calcination at three typical temperatures, viz. 350, 550, and 750 °C and examined their performance variation when used as anodes in lithium ion batteries. Phase and structure of the materials are studied by powder x-ray diffraction (XRD) technique. Single phase MnCo2O4,ZnCo2O4 and Co3O4 are obtained for all different temperatures 350 °C, 550 °C and 750 °C; whereas FeCo₂O₄ and NiCo₂O₄ contained their constituent binary phases even after repeated calcination. Morphologies of the materials are studied via scanning electron microscopy (SEM): needle-shaped particles of MnCo₂O₄ and ZnCo₂O₄, submicron sized particles of FeCo₂O₄ and agglomerated submicron particle of NiCo₂O₄ are observed. Galvanostatic cycling has been conducted in the voltage range 0.005–3.0 V vs. Li at a current density of 60 mA g^?1 up to 50 cycles to study their Li storage capabilities. Highest observed charge capacities are: MnCo₂O₄ – 365 mA h g^?1 (750 °C); ZnCo₂O₄ – 516 mA h g^?1 (550 °C); FeCo₂O₄ – 480 mA h g^?1 (550 °C); NiCo₂O₄ – 384 mA h g^?1 (750 °C); and Co₃O₄ – 675 mA h g^?1 (350 °C). The Co₃O₄ showed the highest reversible capacity of 675 mA h g^?1; the NiO present in NiCo₂O₄ acts as a buffer layer that results in improved cycling stability; the ZnCo₂O₄ with long needle-like shows good cycling stability.     

Intensification of Freeze-Drying Rate of Bacillus subtilis MTCC 2396 Using Tungsten Halogen Radiation: Optimization of Moisture Content and α-Amylase Activity

A novel freeze-drying protocol has been explored to render fast and cost-effective freeze drying of hyperamylase producing Bacillus subtilis MTCC2396 employing a tungsten halogen lamp radiator (THLR) as a heat source. Response surface methodology assessed the maximum reduction in moisture content (96.07%) and minimum reduction in α-amylase (EC 3.2.1.1) activity (1.02%) in 4 h drying time at 42.5°C radiation temperature. α-amylase activity (0.046 U) and final moisture content (3.93%) of the optimally freeze-dried bacterial strain appeared satisfactory. The freeze-drying time using THLR (4 h) is remarkably lower compared to that under a conventional conductive plate heater (CPH) (10 h) at otherwise identical conditions. The higher effective moisture diffusivity of 0.0052 to 0.0078 m ²/s under THLR compared to 0.00084 to 0.0015 m ²/s under CPH (corresponding to 20–50°C) advocated the superiority of the THLR heating protocol. The higher efficacy of THLR was also evidenced through lower activation energy (8.42 kJ/mol) of moisture diffusion compared to that (12.051 kJ/mol) of CPH. The optimally freeze-dried bacteria demonstrated the same growth rate in addition to exhibiting excellent retention of bioremedial (Hg²⁺ removal) activity to that of the control.     

A study on the importance of dependent radiative effects in determining the spectral and total emittance of particulate ash deposits in pulverised fuel fired furnaces

This paper presents the results of an experimental and theoretical investigation on the importance of dependent effects in determining the emittance of ash deposits. A model has been developed to predict the spectral emittance (directional, normal, hemispherical) of semi-transparent and opaque particulate deposits without considering dependent effects. Predictions from this model have been presented to illustrate the effects of particle size and composition. Hemispherical transmission and reflection measurements have been performed on semi-transparent and opaque particular deposits over a wavelength range typical of pf fired furnances and spectral emittance has been deduced therefrom. Well characterised slag particles, with composition and size similar to ash deposits formed in pf fired furnances, have been used in the measurements. For the opaque deposit, difference between the model predictions and measurements, in terms of emittance, have been found to be significant at wavelengths up to 7 μm. This difference is believed to be largely due to dependent effects. Such measurements and comparisons appear to be the first of its kind and more experiments are recommended to quantify the effects.