车联网中基于雾计算和多TA的条件隐私保护认证方案

车联网在生活中扮演着越来越重要的角色,它可以有效地防止交通拥堵从而减少交通事故。然而,在车联网中总是有非法车辆试图接入车联网并发布虚假消息。此外,现有方案多数存在计算效率低下的问题。针对上述存在的问题进行了研究,提出了一种车联网中基于雾计算和多TA的条件隐私保护认证方案。在保护车辆用户身份的条件下实现了车辆、雾节点、TA三者之间的身份认证,且在车辆追踪阶段可以还原车辆用户的真实身份,从而实现条件隐私保护。雾计算的使用降低了方案的计算和通信开销,同时多TA模型的使用也解决了单TA单点故障的问题。安全性证明和性能分析的结果表明该方案是安全且高效的。最后对当前方案进行了总结以及对未来研究作出了展望。     

DCS在酸相法氯化聚乙烯生产中的应用

把DCS应用于酸法生产CPE中，描述了DCS的硬件配制，生产中的控制要点及自控方案，在工业化生产中取得了良好效果。     

Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted.     

Mixed H2/H∞ robust model predictive control with saturated inputs

In this paper, we investigate the mixed H₂/H_∞ robust model predictive control (RMPC) for polytopic uncertain systems, which refers to the infinite horizon optimal guaranteed cost control (OGCC). To fully use the capability of actuators, we adopt a saturating feedback control law as the control strategy of RMPC. As the saturating feedback control law can be effectively represented by the convex hull of a group of auxiliary linear feedback laws, the auxiliary feedback laws allow us to design the actual feedback control law without consideration of the input constraints directly to achieve the improved performance. Moreover, we suggest the relative weights on the actual and auxiliary feedback laws to the RMPC, which in turn improves the closed-loop system performance. Furthermore, an off-line design of the proposed RMPC is also developed to make it more practical. Numerical studies demonstrate the effectiveness of the proposed algorithm.     

Making sky lanterns from polygonal meshes

Releasing sky lanterns is a popular way of celebrating festivals and ceremonies in the Asian countries. This paper presents a computer-aided approach to help novice users to design flyable sky lantern with desired shape. Given a closed up-right 3D model with a user-specified cutting on the bottom, our system optimizes the shape by regularizing the boundary, smoothing the geometry and improving the volume-to-area ratio to make it feasible for flying. The optimized shape is then approximated by a set of developable patches. Next, through a physical analysis step that tests the flying condition and determines the optimal size, the approximated shape is flattened into 2D patches, which can be printed out and glued together to form the airbag. Finally, the user can attach the airbag to a bamboo frame and assemble the fuel cell. We successfully apply our prototype system to design and construct real sky lanterns.     

Synthesis and characterization of copolythiophene

Copolythiophenes (Co‐PTs), poly(3‐hexylthiophene‐co‐3‐thiophene carboxylic acid) (P3HT‐TCa), poly(3‐hexyloxylthiophene‐co‐3‐thiophene carboxylic acid) (P3HOT‐TCa), and poly(3‐phenylthiophene‐co‐3‐thiophene carboxylic acid) (P3PhT‐TCa), were synthesized by chemical oxidized polymerization to investigate the effect of copolymerization on the properties of polythiophenes (PTs). Gel permeation chromatography showed that the molecular weight (MW) of Co‐PT was lower than that of homopolythiophene. Fourier transform infrared (FTIR) spectra indicated that the copolymerization was successful between the monomers. The λ_max of Co‐PTs gave a “blue shift” in ultraviolet‐visible (UV‐VIS) spectra. Photoluminescence (PL) spectra showed that the PL intensity of Co‐PT became weaker than that of homopolythiophene and the disappearance of PL had been observed in P3HOT‐TCa. The thermal stability of Co‐PT was influenced by the carboxyl for its low decomposition temperature. Furthermore, the copolymerization between multi‐wall carbon nanotube containing thiophene ring (MWNT‐Th) and 3‐hexyloxylthiphene could also take place successfully. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

矾土尖晶石钢包浇注料的研制与应用

采用特级矾土熟料为骨科，天然出合成的镁铝尖晶石为部分基质，选用新型复合结合剂研制成矾土尖晶石质钢包浇注料．使用结果表明：一次性寿命较传统的铝镁浇注料提高８０％以上．     

Chaos-based self-embedding fragile watermarking with flexible watermark payload

This paper proposes a self-embedding watermarking scheme that reduces the watermark payload significantly while maintaining good recovery quality and security. The embedded watermark contributes to the tamper detection and content recovery and is composed of only the compression codes of the image content. The compression codes with variable length are generated according to the roughness of the image. To improve the security, a chaos-based pseudorandom sequence generator is adopted to generate block-mapping sequence and encrypt compression codes. The proposed method takes into account the invisibility, recovery quality, and security using the flexible watermark payload, which preserves sufficient information of the image block with as few bits as possible. Experimental results demonstrate that the proposed scheme not only outperforms conventional self-embedding fragile watermarking algorithms in tamper detection and recovery, but also improve the security against the various counterfeiting attacks.     

Automating fluid delivery in a capillary microfluidic device using low-voltage electrowetting valves

A multilayer capillary polymeric microfluidic device integrated with three normally closed electrowetting valves for timed fluidic delivery was developed. The microfluidic channel consisted two flexible layers of poly (ethylene terephthalate) bonded by a pressure-sensitive adhesive spacer tape. Channels were patterned in the spacer tape using laser ablation. Each valve contained two inkjet-printed silver electrodes in series. Capillary flow within the microchannel was stopped at the second electrode which was modified with a hydrophobic monolayer (valve closed). When a potential was applied across the electrodes, the hydrophobic monolayer became hydrophilic and allowed flow to continue (valve opened). The relationship between the actuation voltage, the actuation time, and the distance between two electrodes was performed using a microfluidic chip containing a single microchannel design. The results showed that a low voltage (4.5 V) was able to open the valve within 1 s when the distance between two electrodes was 1 mm. Increased voltages were needed to open the valves when the distance between two electrodes was increased. Additionally, the actuation time required to open the valve increased when voltage was decreased. A multichannel device was fabricated to demonstrate timed fluid delivery between three solutions. Our electrowetting valve system was fabricated using low-cost materials and techniques, can be actuated by a battery, and can be integrated into portable microfluidic devices suitable for point-of-care analysis in resource-limited settings.     

Inspection of Remanent Polarization in the Ferroelectric Ceramic PZT 95/5 Through Pyroelectric Effect

Shock-induced depoling of the ferroelectric (FE) ceramic PZT 95/5 is utilized in a number of pulsed power devices. Nondestructive testing of remanent polarization of PZT 95/5 is developed by pyroelectric effect in this paper. Approximately linear relation between the change of polarization during low- to high-temperature rhombohedral FE phase and the remanent polarization was found through pyroelectricity of a single piece of PZT 95/5 ceramics. The change of polarization of a prototype for shock-driven pulsed power during the FE_HT↔FE_LT phase transformation was also investigated through directly measuring the pyroelectric current. Results indicate that pyroelectric effect caused by the reversible FE_HT–FE_LT phase transition could be used as a non-destructive inspection for the remanent polarization of a prototype about shock-driven pulsed power supply.