High yield synthesis of boron-based nanosheets

ABSTRACT

We present the chemical exfoliation of magnesium diboride (MgB₂) by employing organic chelating agents for synthesising boron-based nanosheets in high yield. MgB₂ is a promising parent material towards realising quasi-2D forms of boron, owing to its unique layered constitution: graphenic boron planes interleaved with hexagonal arrays of Mg atoms. Chelating agents can selectively extract the interlayer Mg from MgB₂ in water, to form Mg-chelant complexes. The loss of Mg results in delamination of MgB₂ into boron-based nanosheets. This approach is further improved by rational choice of chelants with greater affinity for Mg and tuning the optimal pH for metal complexation, thereby leading to a better yield of nanosheets. These boron-based nanosheets have been explored for their candidacy as a new class of inorganic fillers in a polymeric matrix – polyvinyl alcohol (PVA). The mechanical and thermal properties of these boron-based nanosheet-PVA nanocomposite films have been studied.     

Extraction of antioxidants from several berries pressing wastes using conventional and supercritical solvents

The solid waste generated in industrial berry juice production was considered as a low cost raw material for the extraction of natural antioxidants. Berries contain phenolic compounds with high antioxidant potential, including anthocyanins, proanthocyanidins, flavonols, catechins, benzoic and cinnamic acids. The solid residues generated from blueberry, cranberry and raspberry after pressing were extracted by conventional solvent extraction or by supercritical CO₂ (SC–CO₂) extraction. The effect of particle size and extraction time on the extraction yield, phenolic yield and phenolic content of the extracts produced by conventional solvents was assessed. Supercritical CO₂ extraction was performed during 2 h operating in the range 80–300 bar at 60 °C using 2.5 L CO₂/h. Maximum solubles yield of 5.20% were extracted from raspberry wastes at 200 bar, 3.89% from cranberry wastes at 250 bar and 1.4% from blueberry wastes at 200 bar. The highest phenolic content of the extracts was observed for blueberry pomace in the trap, with 9 grams of gallic acid equivalents per 100 g of extract. The ABTS (2, 2′-azino-bis-[3-ethylbenzotiazol-6-sulfonic acid]) and DPPH (α,α-diphenyl-β-picrylhydrazyl) radical scavenging capacity of the SC–CO₂ extracts was moderate in comparison with the activity of conventional solvent extracts.     

Repetitive Traumatic Brain Injury Causes Neuroinflammation before Tau Pathology in Adolescent P301S Mice

Repetitive closed head injury (rCHI) is commonly encountered in young athletes engaged in contact and collision sports. Traumatic brain injury (TBI) including rCHI has been reported to be an important risk factor for several tauopathies in studies of adult humans and animals. However, the link between rCHI and the progression of tau pathology in adolescents remains to be elucidated. We evaluated whether rCHI can trigger the initial acceleration of pathological tau in adolescent mice and impact the long-term outcomes post-injury. To this end, we subjected adolescent transgenic mice expressing the P301S tau mutation to mild rCHI and assessed tau hyperphosphorylation, tangle formation, markers of neuroinflammation, and behavioral deficits at 40 days post rCHI. We report that rCHI did not accelerate tau pathology and did not worsen behavioral outcomes compared to control mice. However, rCHI induced cortical and hippocampal microgliosis and corpus callosum astrocytosis in P301S mice by 40 days post-injury. In contrast, we did not find significant microgliosis or astrocytosis after rCHI in age-matched WT mice or sham-injured P301S mice. Our data suggest that neuroinflammation precedes the development of Tau pathology in this rCHI model of adolescent repetitive mild TBI.     

Comparative study of Yb:Lu3Al5O12 and Yb:Lu2O3 laser ceramics produced from laser-ablated nanopowders

We present a comparative study of two Lu-based oxide ceramics doped with Yb³⁺ ions, namely Yb:Lu₃Al₅O₁₂ (garnet) and Yb:Lu₂O₃ (sesquioxide), promising for thin-disk lasers. The ceramics are fabricated using nanopowders of 3.6 at.% Yb:Lu₂O₃ and Al₂O₃ produced by laser ablation: Yb:Lu₃Al₅O₁₂ – by vacuum sintering at 1800 °C for 5 h with the addition of 1 wt% TEOS as a sintering aid, and Yb:Lu₂O₃ – by vacuum pre-sintering at 1250 °C for 2 h followed by Hot Isostatic Pressing at 1400 °C for 2 h under Ar gas pressure of 207 MPa. The comparison includes the structure, Raman spectra, transmission, optical spectroscopy and laser operation. The crystal-field splitting of Yb³⁺ multiplets is revealed for Lu₃Al₅O₁₂. A continuous-wave (CW) Yb:Lu₃Al₅O₁₂ ceramic microchip laser generates 5.65 W at 1031.1 nm with a slope efficiency of 67.2%. In the quasi-CW regime, the peak power is scaled up to 8.83 W. The power scaling for the Yb:Lu₂O₃ ceramic laser is limited by losses originating from residual coloration and inferior thermal behavior.     

A real-time RT-PCR method to detect viable Giardia lamblia cysts in environmental waters

Currently, USEPA Method 1623 is the standard assay used for simultaneous detection of Giardia cysts and Cryptosporidium oocysts in various water matrices. However, the method is unable to distinguish between species, genotype, or to assess viability. Therefore, the objective of the present study was to address the shortcomings of USEPA Method 1623 by developing a novel molecular-based method that can assess viability of Giardia cysts in environmental waters and identify genotypes that pose a human health threat (assemblage groups A and B). Primers and TaqMan^® probes were designed to target the beta-giardin gene in order to discriminate among species and assemblages. Viability was determined by detection of de-novo mRNA synthesis after heat induction. The beta-giardin primer/probe sets were able to detect and differentiate between Giardia lamblia assemblages A and B, and did not detect Giardia muris (mouse species) or G. lamblia assemblages C, D, E and F (non-human), with the exception of Probe A which did detect G. lamblia assemblage F DNA. Additionally, DNA or cDNA of other waterborne organisms were not detected, suggesting that the method is specific to Giardia assemblages. Assay applicability was demonstrated by detection of viable G. lamblia cysts in spiked (assemblage B) and unspiked (assemblage A and B) reclaimed water samples.     

Perchlorate exposure in lactating women in an urban community in New Jersey

Perchlorate is most widely known as a solid oxidant for missile and rocket propulsion systems although it is also present as a trace contaminant in some fertilizers. It has been detected in drinking water, fruits, and vegetables throughout New Jersey and most of the United States. At sufficiently high doses, perchlorate interferes with the uptake of iodine into the thyroid and may interfere with the development of the skeletal system and the central nervous system of infants. Therefore, it is important to quantify perchlorate in breast milk to understand potential perchlorate exposure in infants. In this study we measured perchlorate in breast milk, urine, and drinking water collected from 106 lactating mothers from Central New Jersey. Each subject was asked to provide three sets of samples over a 3-month period. The average ± SD perchlorate level in drinking water, breast milk, and urine was 0.168 ± 0.132 ng/mL (n = 253), 6.80 ± 8.76 ng/mL (n = 276), and 3.19 ± 3.64 ng/mL (3.51 ± 6.79 μg/g creatinine) (n = 273), respectively. Urinary perchlorate levels were lower than reference range values for women of reproductive age (5.16 ± 11.33 μg/g creatinine, p = 0.03), likely because of perchlorate secretion in breast milk. Drinking water perchlorate levels were ≤ 1.05 ng/mL and were not positively correlated with either breast milk or urine perchlorate levels. These findings together suggest that drinking water was not the most important perchlorate exposure source for these women. Creatinine-adjusted urine perchlorate levels were strongly correlated with breast milk perchlorate levels (r = 0.626, p = < 0.0005). Breast milk perchlorate levels in this study are consistent with widespread perchlorate exposure in lactating women and thus infants. This suggests that breast milk may be a source of exposure to perchlorate in infants.     

Lithography-based nanoelectrochemistry

Lithographically fabricated nanostructures appear in an increasingly wide range of scientific fields, and electroanalytical chemistry is no exception. This article introduces lithography methods and provides an overview of the new capabilities and electrochemical phenomena that can emerge in nanostructures.     

Differences in reactivity of pulverised coal in air (O2/N2) and oxy-fuel (O2/CO2) conditions

The reactivity of four pulverised Australian coals were measured under simulated air (O₂/N₂) and oxy-fuel (O₂/CO₂) environments using a drop tube furnace (DTF) maintained at 1673 K and a thermogravimetric analyser (TGA) run under non-isothermal (heating) conditions at temperatures up to 1473 K. The oxygen concentration, covering a wide and practical range, was varied in mixtures of O₂/N₂ and O₂/CO₂ in the range of 3 to 21 vol.% and 5 to 30 vol.%, respectively. The apparent volatile yield measured in CO₂ in the DTF was greater than in N₂ for all the coals studied. Pyrolysis experiments in the TGA also revealed an additional mass loss in a CO₂ atmosphere, not observed in a N₂ atmosphere, at relatively high temperatures. The coal burnout measured in the DTF at several O₂ concentrations revealed significantly higher burnouts for two coals and similar burnouts for the other two coals in oxy-fuel conditions. TGA experiments with char also revealed higher reactivity at high temperatures and low O₂ concentration. The results are consistent with a char–CO₂ reaction during the volatile yield experiments, but additional experiments are necessary to resolve the mechanisms determining the differences in coal burnout.     

One-step growth of 3-5 nm diameter palladium electrocatalyst in a carbon nanoparticle-chitosan host and characterization for formic acid oxidation

The electrochemical formation of a palladium nanoparticle catalyst composite material has been investigated. A carbon nanoparticle-chitosan host film deposited onto a carbon substrate electrode has been employed to immobilize PdCl₂ as catalyst precursor. A one-step electrochemical reduction process gave Pd nanoparticles within the chitosan matrix with different levels of loading, on different carbon substrates, and with a reproducible catalyst particle diameter of ca. 3-5 nm. High activity for formic acid oxidation has been observed in aqueous phosphate buffer medium. The oxidation of formic acid has been investigated as a function of pH and maximum catalyst activity was observed at pH 6. When varying the formic acid concentration, limiting behaviour consistent with a “resistance effect” has been observed. A flow cell system based on a screen-printed carbon electrode has been employed to establish the effect of hydrodynamic conditions on the formic acid oxidation. Both increasing the convective-diffusion mass transport rate and increasing the concentration of formic acid caused the oxidation peak current to converge towards the same “resistance limit”. A mechanistic model to explain the resistance effect based on CO₂ flux and localized CO₂ gas bubble formation at the Pd nanoparticle modified carbon nanoparticle-chitosan host film has been proposed.