Sliding wear behaviour of ZrN and (Zr, 12 wt% Hf)N coatings

In the present study, the sliding wear resistances of ZrN and (Zr, 12 wt% Hf)N coatings deposited on a hardened AISI D2 tool steel by arc-physical vapor deposition (PVD) technique were examined by a ball-on-disc wear tester. Alloying of ZrN coating with 12 wt% Hf did not change the hardness significantly, but achieved an improvement on adhesion strength and dry sliding wear resistance against steel (AISI 52100-55HRC) and Al₂O₃ balls.     

Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe2O4 nanoparticles

In this study, manganese ferrite (MnFe₂O₄) nanoparticles were produced through flame spray pyrolysis (FSP). To investigate the effects of heat treatment, the nanoparticles were annealed between 400 and 650°C for 4 h in air in a comparative manner. The structural, chemical, morphological, and magnetic properties of the nanoparticles were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), dynamic light scattering (DLS), and vibrating sample magnetometry (VSM), respectively. The XRD results showed that the nanoparticles synthesized by the FSP method exhibited the MnFe₂O₄ spinel ferrite structure. The annealing process led to the decomposition of MnFe₂O₄ into various phases. According to the morphological analysis, the as-synthesized particles were hemispherical–cubic in shape and had an average particle size of less than 100 nm. In addition, the chemical bond structures of the nanoparticles were confirmed in detail by XPS elemental analysis. The highest saturation magnetization was recorded as 33.50 emu/g for the as-produced nanoparticles. The saturation magnetization of the nanoparticles decreased with increasing annealing temperature, while coercivity increased.     

Effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with Bioaggregate apical plugs

To evaluate the effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with DiaRoot BioAggregate (BA) when used as apical plugs. Forty single-rooted teeth were prepared using Peeso reamers. The samples were divided into four groups. The intracanal medicaments were applied to the root canals as follows: Group1: a combination of metronidazole–ciprofloxacin–cefaclor, Group2: a combination of metronidazole–ciprofloxacin, Group3: calcium hydroxide, and Group4: no medication. After 21 days, the medicaments were removed. The apical part of each root was horizontally sectioned into 1-mm thick slices. The samples were divided into two subgroups, and the following materials were placed: Biodentine, DiaRoot-BioAggregate. After 48-h incubation, the push-out bond strength was measured. The data were analyzed by a two-way ANOVA. Biodentine showed a significantly higher mean push-out bond strength value than DiaRoot-BioAggregate (P = 0.00). The medications have an effect on the push-out bond strength of both materials (P = 0.002). Biodentine showed better adhesive performance as an apical plug than DiaRoot-BioAggregate.     

Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self‐same nanocomposites

We present a strategy for stabilizing the morphological integrity of electrospun polymeric nanofibers by heat stimuli in situ crosslinking. Amorphous polymer nanofibers, such as polystyrene (PS) and its co‐polymers tend to lose their fiber morphology during processing at temperatures above their glass transition temperature (T_g) typically bound to happen in nanocomposite/structural composite applications. As an answer to this problem, incorporation of the crosslinking agents, phthalic anhydride (PA) and tributylamine (TBA), into the electrospinning polymer solution functionalized by glycidylmethacrylate (GMA) copolymerization, namely P(St‐co‐GMA), is demonstrated. Despite the presence of the crosslinker molecules, the electrospinning polymer solution is stable and its viscosity remains unaffected below 60 °C. Crosslinking reaction stands‐by and can be thermally stimulated during post‐processing of the electrospun P(St‐co‐GMA)/PA‐TBA fiber mat at intermediate temperatures (below the T_g). This strategy enables the preservation of the nanofiber morphology during subsequent high temperature processing. The crosslinking event leads to an increase in T_g of the base polymer by 30 °C depending on degree of crosslinking. Crosslinked nanofibers are able to maintain their nanofibrous morphology above the T_g and upon exposure to organic solvents. In situ crosslinking in epoxy matrix is also reported as an example of high temperature demanding application/processing. Finally, a self‐same fibrous nanocomposite is demonstrated by dual electrospinning of P(St‐co‐GMA) and stabilized P(St‐co‐GMA)/PA‐TBA, forming an intermingled nanofibrous mat, followed by a heating cycle. The product is a composite of crosslinked P(St‐co‐GMA)/PA‐TBA fibers fused by P(St‐co‐GMA) matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44090.     

Effect of Al2O3 Additions on the Thermal Expansion Behavior of a Li2O-ZnO-SiO2 Glass-Ceramic

The effect of Al₂O₃ substitution on the thermal expansion behavior of a Li₂O-ZnO-SiO₂ glass-ceramic was investigated using differential thermal analysis, X-ray diffractometry, and dilatometry. The coefficient of thermal expansion of the original Al₂O₃-free glass-ceramic measured between 20° and 900°C decreased from 12.4 × 10^-6°C^-1 to 6.3 × 10^-6°C^-1 with Al₂O₃ substitution for ZnO up to 11 wt%. The results were correlated to the changes in the phase assemblage with Al₂O₃ addition.     

Knowledge,attitudes and self-reported practices of food service staff regarding food hygiene in Edirne,Turkey

The purpose of this study was to evaluate the knowledge, attitudes and practices among food service staff with regards to food hygiene in hospitals in Edirne, Turkey, and to provide baseline data for implementing HACCP in hospital food services by carrying out a questionnaire by a face-to-face interview. The current study shows that food service staff in Edirne hospitals have insufficient knowledge regarding the basics of food hygiene. And also revealed a discrepancy between attitudes and practices towards food hygiene. There is an immediate need for continuous training among food handlers regarding safe food handling practices.     

Effect of nonlinearity on site response and ground motion due to earthquake excitation

Ground motions under earthquake loading are influenced by the local soil conditions, but the non-linearity of the soil behavior makes it difficult to estimate the site response. The paper reports a non-linear analysis developed to elucidate the effect of non-linearity on site response, illustrating its applicability with reference to a petroleum storage tank site subjected to earthquake excitation.     

Classification of Spectral Patterns Obtained from Eustachian Tube Sonometry

Spectral patterns of sound transmission through the Eustachian tube (ET) have been obtained in a series of experiments designed to identify ET dysfunction. Previous studies of ET function using sonometry have relied on heuristic and somewhat arbitrary methods in interpreting the data. In this study, an automated classification algorithm was developed to separate these sonograms into three distinct groups. From a total of 150 sample spectra, 75 were used in the formation of learning sets. The remaining spectra were classified into these three groups using standard Bayesian techniques. Both parametric and nonparametric methods were applied in estimating conditional probability density functions. Results of classification are compared with an independent test of ET function. Agreement between our classifier and the results of the independent test was as good as 97.3 percent. The results of this study indicate that an automated classification procedure can effectively distinguish among the three major types of sonograms obtained from ET sonometry.