Use of binary and ternary blends in high strength concrete

Combinations of cement additions may provide more benefits for concrete than a single one. In this study, 80 high strength concretes containing several types and amounts of additions were produced. In the first stage, silica fume contents in binary blends that give the highest strengths were determined for different binder contents. In the second stage, a third binder (Class F or Class C fly ash or ground granulated blast furnace slag) was introduced to the concretes already containing Portland cement and silica fume in the amounts found in the first stage. Results indicated that ternary blends almost always made it possible to obtain higher strengths than Portland cement + silica fume binary mixtures provided that the replacement level by the additions was chosen properly. Moreover, the performance of slag in the ternary blends was better than Class F fly ash but worse than Class C fly ash.     

Leaching behavior of chromium in chrome shaving generated in tanning process and its stabilization

In this study, leaching properties and pollution potential of chromium in chrome shaving (CS), which is a solid residue of leather industry, containing 2.27% Cr were investigated and thermal stabilization procedure was applied to the CS for chromium immobilization. For this purpose, firstly, effects of the liquid/solid ratio, contact time, pH and sequential extraction on the leaching behavior of chromium in the CS were studied. It was determined that the CS-caused chromium pollution is a hazardous material for environment. Thermal stabilization procedure was applied to the CS in the temperature range of 250-500 degrees C for the chromium immobilization. Effective stabilization of chromium in the CS was achieved by heating of CS at 350 degrees C under CO(2) atmosphere. Leaching experiments were also carried out with the samples obtained from the stabilization process and the results compared with that of the CS. Also, TCLP test method was applied to the samples to determine pollution potentials and discharge situations of the CS and its stabilization products. While the chromium concentrations in the test solutions of all samples stabilized thermally at above 350 degrees C were below the USEPA regulatory limit of 5 mg/l, the concentration of chromium leached out from the CS was 30-fold bigger than the USEPA regulatory limit.     

Collaboration Environments for Construction: Implementation Case Studies

Although emerging technologies offer the construction industry many opportunities for computer supported collaboration environments, the companies adopting these technologies usually fail in achieving the full benefits from their implementations. The reason for this is found to be focusing too much on the technical factors and ignoring or underestimating the factors related to change, implementation, human and organizational factors, and the roles of the management and end users. Each new information technology (IT) implementation involves some change for the organization and the employees, and is therefore a source of resistance and confusion unless special attention is paid to managing this change. This paper aims to review the related theoretical concepts and previous work on success factors for collaboration environment implementations and failure reasons for IT, and to present the current approaches adopted by construction organizations implementing collaboration environments. In order to achieve these aims, the results of an extensive literature review on general causes of failure in IT implementations are presented, and the key areas to focus on during IT design and implementation are highlighted and explained. The results of exploratory case studies are summarized to show the current IT implementation and collaborative working approaches in the United Kingdom construction industry and interpreted using a systems thinking approach. The paper then concludes with some insights into how construction organizations can improve the implementation of collaboration systems.     

Identifying the factors affecting the willingness to pay for fuel-efficient vehicles in Turkey: A case of hybrids

This paper aims to determine the factors that have an impact on the consumers’ willingness to pay a premium for hybrid automobiles in Turkey. A web-based random survey was conducted in different regions of Turkey. A questionnaire was administered to 1983 participants in January–March of 2009. The questionnaire was prepared by taking the issues raised in various sources into account. An ordered Probit model was used to meet the objective. Results show that variables such as income, gender, education, concerns about global warming, number of automobiles, importance of automobile performance, risk preference, attitude toward the alternative energy sources have an impact on the consumers’ willingness to pay a premium for hybrids. Findings suggest that consumers who have high income, higher educational level, and concerns about the global warming are more likely to pay a premium for hybrids. This study is expected to make important contributions to the current literature related to the consumers’ willingness to pay for hybrids by providing a research study from a developing country’s perspective. Results of this study also make important contributions to the policy and decision makers, environmental groups and automotive industry.     

Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride

Effect of potassium carbonate addition on the carbothermic formation of hexagonal boron nitride (hBN) was investigated by keeping the K₂CO₃ added B₂O₃+C mixtures in nitrogen atmosphere at 1400 °C for 40–160 min. K₂CO₃ amount was varied in the range of 10–60 wt% of the B₂O₃+C mixture. Products were subjected to XRD and quantitative analyses, SEM and TEM observations, and particle size measurement. Amount of hBN increased considerably with K₂CO₃ addition; also particle size and crystallinity improved. Catalytic role of K₂CO₃ was suggested as forming a potassium borate melt in which hBN particles form, in addition to carbothermic formation reaction. Effect of K₂CO₃ on increasing the hBN amount decreased when it was used over 40%. This was attributed to the rapid evaporation of the formed potassium borate liquid.     

Preparation and characterization of multilayer anti-reflective coatings via sol-gel process

Single layer and multilayer films consisting of SnO₂, Ta₂O₅, SiO₂, TiO₂, indium tin oxide (ITO) and antimony tin oxide (ATO) have been prepared by sol-gel dip coating technique. All of the multilayer films contained a SiO₂ top layer, which was composed of SiO₂ nanoparticles. The other films had polymeric character. Obtained films were characterized by ellipsometry, XRD, AFM and SEM. Light transmittance values of the films were compared. Films other than SiO₂ and Ta₂O₅ were found to have crystalline structure. Thickness values of the films were in the range of 30–115 nm and roughness values were in 1.2–23 nm range. Single layer porous silica provided 95% light transmittance, whereas ITO-TiO₂-SiO₂ multilayer film provided a light transmittance of 97.2%.     

Formulating Pantone colors by unused base inks,formulation software,and a spectrophotometer

Unused base inks that are not going to be used for printing production are considered to be hazardous materials. Their disposal is expensive, and strict environmental regulations should be followed for their disposal. As an alternative, this article describes how spectral data of unused base inks can be gathered and mixed to generate new colors to incorporate them back to print production for small‐volume jobs. In this study, 30 different Pantone colors were selected as target colors. The CIE L*a*b* spectral data of Pantone colors and unused base inks were gathered via a spectrophotometer. A commercial formulation software, based on multiflux theory and CIE L*a*b* color space, was used to formulate ink recipes that contained the base inks. To quantify the performance of ink recipes, they were mixed and printed using an offset printability tester. The CIELAB ΔE*_ab metric, developed by CIE, was used to detect the visual differences between the target Pantone Color and printed colors.     

Investigation of water gas-shift activity of Pt–MOx–CeO2/Al2O3 (M = K,Ni, Co) using modular artificial neural networks

The water gas shift activity of promoted Pt–CeO₂/Al₂O₃ catalysts were investigated in this work. The catalysts were prepared by incipient to wetness impregnation and tested using a microflow reaction system. It was found that K has beneficial effects under product-containing feed compositions while Co and Ni promoters worsen catalyst performance. The reaction temperature and feed H₂O/CO ratio positively affect the catalytic activity, whereas CO₂ and H₂ addition to the feed decreases CO conversion, as expected. The experimental results were also modeled using modular neural networks, at which the catalyst preparation and operational (reaction) variables were used together in the same network because they are interacting but processed differently because they are dissimilar in their form (i.e. categorical versus continuous) and their effects on catalytic activity. It was concluded that the effects of catalyst preparation and operational variables and their relative importance could be comprehended more accurately by using this approach, which may be also employed in other similar systems.